1000KV BLDC Motor A2212 With Soldered Bullet Connector
PRODUCT OVERVIEW
- Motor KV: 1000
- Current Capacity: 12A/60S
- LiPO Batteries: 2S-3S
- Efficiency Current: 4-10A
- Shaft Diameter: 3.17 mm
- Prop Adapter is quality tested before shipping to customers.
- 1 x A2212 1000Kv Brushless Motor for Drone
- 1 x Prop Adapter
- A Motor Holder (X-type) and a set of screws
1000KV Motor with 30A ESC and 1045 Propeller Set For RC Plane
PRODUCT OVERVIEW:
- The steel design is capable of withstanding competitional conditions.
- Lightweight design makes them suitable for a wide range of Quad-copters and Hexacopter Frames.
- Compact size.
- Offers great performance and value for money.
- Smooth throttle response for best RC experience.
- ESC used has an On-Board BEC.
- Faster and Better speed control.
Package Includes:
- 1 x A2212 10T 13T 1000KV Brushless Motor for Drone with Soldered Connector
- 4 x Prop Adapter
- Motor Holder (X-type) and set of screws
- 1 x ESC 30A BLDC ESC
- 2 x 1045(10×4.5) SF Propellers (1CW, 1CCW).
- 2 x Sets of prop reducers.
1045/1045R 10 inch Propeller Pair (CW+CCW), Black
1045/1045R 10 inch Propeller Pair (CW+CCW), Black (Set of 2)
1045/1045R 10 inch Propeller Pair (CW+CCW), Black (Set of 5)
12706 Thermoelectric Peltier Cooler Module
12v DC Fan 3010 Fan Cooling Brushless Mini Fan For 3D Printer
1602 LCD Board Keypad Shield with Blue Backlight
Specifications:
- Display: 16x2 LCD display
- Backlight: Blue backlight
- Input: Keypad for user input
- Compatibility: Compatible with Arduino Uno, Mega, Leonardo, and other compatible boards
- Mounting: Easy to mount on Arduino board
Package Includes:
1 x LCD Display 1602 Board Keypad Shield with Blue Backlight1602 LCD Display with I2C/IIC Serial Interface Adapter Module
Specifications:
- Display Type: Alphanumeric
- Display Size: 16 characters x 2 lines
- Interface: I2C
- Compatibility: Arduino, Raspberry Pi, ESP8266
- Dimensions: (L x W x H) 80mm x 36mm x 12mm
- Weight: 20g
- Operating Voltage: 5V
- Backlight: Yellow
Package Includes:
1 x LCD 16x2 1602 Alphanumeric Display Yellow 1 x I2C Module Adapter16×2 Character LCD Display With Yellow Backlight
Specifications:
- Display Type: 16x2 Character LCD
- Backlight Color: Yellow
- Operating Voltage: 5V
- Interface: Parallel
- Controller: HD44780 Compatible
- Compatibility: Arduino Boards
- Operating Temperature: -20°C to 70°C
- Storage Temperature: -30°C to 80°C
- Dimensions: 80mm x 36mm x 12mm
- Weight: 30g
Package Includes:
1 x 16x2 Character LCD Display With Yellow Backlight2.4 inch TFT LCD Display Shield for Arduino Uno
Specifications:
- Display Type: 2.4" diagonal Touch LCD TFT
- Resolution: 240×320 pixels
- Color Depth: 18-bit (262,000 colors)
- Voltage Compatibility: 5V compatible, use with 3.3V or 5V logic
- MicroSD Card Slot: Included for additional storage options
- Compatibility: Works with Arduino Uno and Mega-compatible boards
Package Includes:
1 x 2.4 inch TFT LCD Display Shield for Arduino UNO Mega, 1 x Stylus Pen28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver
Specifications:
- Stepper Motor Model: 28BYJ-48
- Stepper Motor Driver Model: ULN2003
- Voltage: 5V DC
- Step Angle: 5.625°/64
- Reduction Ratio: 1/64
- Diameter: 28mm
- Voltage: 5V
- Phase: 4
- Current: 0.1A
- Resistance: 50Ω
- Motor Length: 34mm
- Weight: 30g
Package Includes:
1 x 28BYJ-48 Stepper Motor 1 x ULN2003 Stepper Motor Driver Module30A ESC – Electronic Speed Controller With Dean Connector
30A ESC Electronic Speed Controller With Dean Connector (Set of 4)
30A ESC Simonk Electronic Speed controller with Connector (Set of 4)
30A ESC Simonk Electronic speed controller with Dean Connector
3dBi Magnetic Mount Antenna for GSM FCT Device (10 Feet Long)
40 Pin Dupont Female to Female Jumper Wire, 40 Pieces
40 Pin Dupont Male to Female Jumper Wire, 40 Pieces
PRODUCT OVERVIEW:
- 40 P color DuPont line
- Weight: 45 gm
- Compatible with 2.54mm spacing pin headers
- 40 pcs chromatic male to female color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
40 Pin Dupont Male to Male Jumper Wire, 40 Pieces
PRODUCT OVERVIEW:
- 40P color DuPont line
- Weight: 45 gm
- Compatible with 2.54mm spacing pin headers
- 40pcs chromatic male to male color jumper wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
400 Point Breadboard Half Size Solderless Breadboard
Specifications:
- 400-point breadboard for prototyping circuits
- Half-size design for portability and convenience
- No soldering is required for easy circuit assembly
- Compatible with a wide range of electronic components
- Durable construction for long-lasting performance
- Ideal for hobbyists, students, and professionals
Package Includes:
1 x 400 Point Breadboard Half Size Solderless Breadboard58mm Bluetooth Thermal Printer
PRODUCT OVERVIEW:-
- Easy connectivity with mobile Bluetooth.
- USB / Bluetooth interface available.
- The 58mm Bluetooth thermal receipt printer support cash drawer driving.
- Compatible ESC/pos print commands, support bitmap, and download graphics printing.
- Quality printing low noise and high-speed printing.
- Easy install - the USB pos printer is simple and convenient to operate.
- Quick and easy paper change with low maintenance cost.
Package Includes:
- 1 x 58mm Bluetooth Thermal Printer
- 1 x USB Cable
- 1 x Power Cable
- 1 x CD Drive
- 1 x User Manual
58mm Thermal Receipt Printer
PRODUCT OVERVIEW:-
- The 58mm thermal receipt printer support cash drawer driving.
- Quality printing low noise and high-speed printing.
- Quick and easy paper change with low maintenance cost.
- Easy install - the USB POS printer is simple and convenient to operate.
- Compatible ESC/POS print commands, support bitmap, and download graphics printing.
Package Includes:
- 1 x 58mm Thermal Printer
- 1 x USB Cable
- 1 x Power Cable
- 1 x CD Drive
- 1 x User Manual
58mm Thermal Receipt Printer (Black)
PRODUCT OVERVIEW:-
- The 58mm thermal receipt printer support cash drawer driving.
- Quality printing low noise and high-speed printing.
- Quick and easy paper change with low maintenance cost.
- Easy install - the USB POS printer is simple and convenient to operate.
- Compatible ESC/POS print commands, support bitmap, and download graphics printing.
Package Includes:
- 1 x 58mm Thermal Printer
- 1 x USB Cable
- 1 x Power Cable
- 1 x CD Drive
- 1 x User Manual
5V 2 Channel Relay Module with Optocoupler for Arduino
5V 4 Channel Relay Control Board Module
Specifications:
- Voltage Compatibility: 5V
- Number of Channels: 4
- Driver Current per Channel: 15-20mA
- Relay Type: High-current, AC250V 10A; DC30V 10A
- Interface Compatibility: Arduino, 8051, AVR, PIC, DSP, ARM, MSP430, TTL logic
- LED Indicators: Included for relay output status
Package Includes:
1 x 5V 4 Channel Relay Board Module5V Single Channel Relay Module for Arduino | One Channel Relay
65mm BO Wheels, Robot Wheel For BO Motors
PRODUCT OVERVIEW
- A tire with sponge liner for more strength
- With upgraded tire tread for greater friction
- New design wheel for better combination with the motor
- Diameter: 65 mm
- The material of Wheel: High-strength plastic
- The material of Tyre: Rubber
- Color: Yellow
8 Channel Relay Board 5V Expansion Module with Optocoupler
Specifications:
- Product Name: 8 Channel Relay Board
- Voltage Compatibility: 5V (DC)
- Relay Type: Electromagnetic Relay
- Operating Temperature: -40°C to +85°C
- Input Voltage: 5V DC (Operating)
- Input Voltage Range: 3.3V to 12V DC
- Trigger Input Voltage: 0V (Low-Level Trigger) to VCC (High-Level Trigger)
Package Includes:
1 x 8 Channel Relay ModuleA2212 1000KV BLDC Motor With Soldered Bullet Connector (Set of 4)
PRODUCT OVERVIEW
- Motor KV: 1000
- Current Capacity: 12A/60S
- LiPO Batteries: 2S-3S
- Efficiency Current: 4-10A
- Shaft Diameter: 3.17 mm
- Prop Adapter is quality tested before shipping to customers.
- 4 x A2212 1000Kv Brushless Motor for Drone
- 4 x Prop Adapter
- A Motor Holder (X-type) and set of screws
A2212 1400KV BLDC Motor With Soldered Bullet Connector
PRODUCT OVERVIEW
- Motor KV: 1000
- Current Capacity: 12A/60S
- LiPO Batteries: 2S-3S
- Efficiency Current: 4-10A
- Shaft Diameter: 3.17 mm
- Prop Adapter is quality tested before shipping to customers.
- 1 x A2212 1000Kv Brushless Motor for Drone
- 1 x Prop Adapter
- A Motor Holder (X-type) and set of screws
A2212 1400KV BLDC Motor With Soldered Bullet Connector (Set of 4)
PRODUCT OVERVIEW
- Motor KV: 1000
- Current Capacity: 12A/60S
- LiPO Batteries: 2S-3S
- Efficiency Current: 4-10A
- Shaft Diameter: 3.17 mm
- Prop Adapter is quality tested before shipping to customers.
- 1 x A2212 1000Kv Brushless Motor for Drone
- 1 x Prop Adapter
- A Motor Holder (X-type) and set of screws
Arduino D1 Mini V2 Mini NodeMCU Development Board
Specifications:
- Microcontroller: ESP8266
- Operating Voltage: 3.3V
- Digital I/O Pins: 11
- Analog Input Pins: 1 (3.2V max input)
- Flash Memory: 4 MB
- Clock Speed: 80 MHz
- WiFi: 802.11 b/g/n
- Dimensions: 34.2mm x 25.6mm
- Lua scripting support
Package Includes:
1 x Arduino D1 Mini V2 Mini NodeMCU Development BoardArduino Nano Soldered V3 Board Compatible with Arduino
Specifications:
- Compatibility: Compatible with Arduino Nano V3
- Pins: Pre-soldered for easy connection
- Microcontroller: ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limit): 6-20V
- Flash Memory: 32KB (ATmega328), of which 2KB used by the bootloader
- SRAM: 2KB (ATmega328)
- EEPROM: 1KB (ATmega328)
- Clock Speed: 16MHz
- Dimensions: 18.5 x 43.2 mm
- Weight: 7g
Package Includes:
1 x Arduino Nano V3 Soldered ATMEGA328 Compatible BoardArduino Nano V3 Soldered Board with USB Cable
Specifications:
- Microcontroller: ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limit): 6-20V
- Digital I/O Pins: 14 (6 of which are PWM)
- Analog Input Pins: 8
- Flash Memory: 32 KB (2 KB used by bootloader)
- SRAM: 2 KB
- EEPROM: 1 KB
- Clock Speed: 16 MHz
- Dimensions: 1.85 cm x 4.32 cm
- Weight: Approximately 7g
Package Includes:
1 x Nano Soldered V3 Board 1 x USB CableArduino UNO R3 & Ultrasonic Sensor With SG90 Motor and Jumper Wires
PRODUCT OVERVIEW
- Ultrasonic Operating Voltage(VDC): 3.2 – 5.2
- SG90 Operating Voltage: 3.0 – 7.2V
- Ultrasonic weight (gm): 10
- SG90 weight (gm): 9
- Ultrasonic Measurement Range: 3cm to 350Cm
- SG90 Rotational Degree: 180
- Jumper Wire Compatible with 2.54mm spacing pin headers
- Jumper Wire Durable and reusable
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 1 x Ultrasonic Sensor HC-SR04
- 1 x TowerPro SG90 Servo Motor with Cable
- 1 x SG90 Set of Horns
- 1 x SG90 Set of Screws
- 1 x 40 pcs Male to Male jumper wire set
- 1 x 40 pcs Male to Female jumper wire set
- 1 x 40 pcs Female to Female jumper wire set
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
Arduino Uno R3 Development Board ATmega328P With USB Cable
Arduino Uno R3 with Jumper Wires 120 Pcs
PRODUCT OVERVIEW
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 40P color DuPont line
- Length: 300mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 120 pcs chromatic color jump wire
- High quality and in good working condition
- Durable and reusable
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
- 1 x 40 pcs Male to Male jumper wire set
- 1 x 40 pcs Male to Female jumper wire set
- 1 x 40 pcs Female to Female jumper wire set
Arduino Uno R3 With Jumper Wires 60 Pieces
Product Overview:
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 40P color DuPont line
- Length: 300mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 120 pcs chromatic color jump wire
- High quality and in good working condition
- Durable and reusable
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
- 1 x 20 pcs Male to Male jumper wire set
- 1 x 20 pcs Male to Female jumper wire set
- 1 x 20 pcs Female to Female jumper wire set
Arduino Uno R3 with L293D Motor Driver
PRODUCT OVERVIEW:-
- Experience the power of Arduino Uno R3 combined with L293D motor driver shield for seamless motor control.
- Microcontroller ATmega328P With Operating Voltage : 5V
- Benefit from the ATmega328P microcontroller's abundant memory for program and data storage.
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Precisely control motors with the L293D shield's two H-bridge output channels.
- Optimize performance with a dual power supply configuration for both Arduino Uno R3 and motors.
- Explore a wide range of applications, including robotics, home automation, and motor-driven projects.
- Rely on the proven reliability and robustness of this widely used combination trusted by hobbyists, enthusiasts, and professionals.
- Expand project possibilities with compatibility with various sensors, actuators, and components.
Package Includes:
- 1 x Arduino Uno R3 with Cable
- 1 x L293D Motor Driver Shield
Arduino Uno SMD Development Microcontroller Board With Cable
Specifications:
- Microcontroller: ATmega328P SMD
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- Flash Memory: 32 KB (ATmega328P), of which the bootloader uses 0.5 KB
- SRAM: 2 KB (ATmega328P)
- EEPROM: 1 KB (ATmega328P)
- Clock Speed: 16 MHz
- Length: 68.6 mm
- Width: 53.4 mm
- Weight: 25 g
- USB Interface: CH340G
- Compatible with the Arduino Uno platform
Package Includes:
1 x Arduino Uno R3 Development Microcontroller Board SMD Version 1 x USB CableAutomatic Hand Sanitizer Machine IR Sensor, Water Pump, Relay Module
BO Motor, BO Wheel & Arduino UNO R3 with Jumper Wires 60 Pcs
Product Overview:
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 40P color DuPont line
- Length: 300mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 60 pcs chromatic color jumper wire
- High quality and in good working condition
- Durable and reusable
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
- 1 x 20 pcs Male to Male jumper wire set
- 1 x 20 pcs Male to Female jumper wire set
- 1 x 20 pcs Female to Female jumper wire set
- 4 x BO Motor
- 4 x BO Wheel
Chess Clock by LEAP Master Tournament
Specifications:
- Product Type: Digital Chess Clock
- Display: Large LCD screen for clear time display
- Accuracy: High precision timing to ensure fairness in competitive play
- Material: Durable plastic designed to withstand frequent use and travel
- Weight: Lightweight design for easy transportation
- User-Friendly: Simple setup process for players of all skill levels
Package Includes:
1 x LEAP Master Tournament Digital Chess ClockDC 3.7-6V To 400KV Boost Step Up Power Module
DC BO Motor 12V Dual Shaft – Straight
PRODUCT OVERVIEW
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage (VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kg cm
DC Dual Shaft BO Gear Motor & Wheel With SG90 Servo Motor
PRODUCT OVERVIEW
- Operating Voltage 3V - 12V DC
- RPM Approximately 150 RPM
- No load current 40 - 80 mA
- Output Torque 3.5 kgf.cm
- High quality plastic wheel and BO-series motor
- Plastic Wheels with a slot that matches BO Motor Shaft are made to work with BO motors both Series I and II.
- 66mm diameter, 20mm width
- Operating Voltage: 5 V
- Sonar Sensing Range: 2-400 cm
- Max. Sensing Range: 450 cm
- Frequency: 40 kHz
- Operating voltage: 3.0V~ 7.2V
- Stall torque @4.8V : 1.2kg-cm
- Stall torque @6.6V: 1.6kg-
- 4 x BO Motor
- 4 x BO Wheel
- 1 x HC-SR04 Ultrasonic Sensor
- 1 x Towerpro SG90 Mini Servo Motor
DC Dual Shaft BO Motor & Wheel with SG90 Motor and Ultrasonic Sensor
PRODUCT OVERVIEW
- Operating Voltage 3V - 12V DC
- RPM Approximately 150 RPM
- No load current 40 - 80 mA
- Output Torque 3.5 kgf.cm
- High quality plastic wheel and BO-series motor
- Plastic Wheels with a slot that matches BO Motor Shaft are made to work with BO motors both Series I and II.
- 66mm diameter, 20mm width
- Operating Voltage: 5 V
- Sonar Sensing Range: 2-400 cm
- Max. Sensing Range: 450 cm
- Frequency: 40 kHz
- Operating voltage: 3.0V~ 7.2V
- Stall torque @4.8V : 1.2kg-cm
- Stall torque @6.6V: 1.6kg-
- 4 x BO Motor
- 4 x BO Wheel
- 1 x HC-SR04 Ultrasonic Sensor
- 1 x Towerpro SG90 Mini Servo Motor
DC Water Pump – Micro DC 3-6V Submersible Mini Water Pump
PRODUCT OVERVIEW
- Mini pump, delicate and light, very perfect for an experiment, aquarium, fish tank, and fountain, etc.
- DC 3v to 6v submersible pump
- Micro mini submersible water pump 3v to 6v
- DC water pump for DIY
- DC pumps for the HOBBY kit.
Digital Kitchen Timer – Baseus Heyo Rotation Countdown Timer Kitchen Timer
Specifications:
- Product Type: Digital Kitchen Timer
- Functionality: Multi-use with alarm clock, countdown, and stopwatch features
- Display: Clear, easy-to-read digital screen
- Timing Capacity: Ranges from 1 second to 99 minutes and 59 seconds
- Material: Durable, high-quality plastic for long-lasting use
Package Includes:
1 x Digital Kitchen Timer Baseus Heyo Rotation Countdown Timer 1 x User ManualDigital Timer Clock by Taylor – Perfect Timing for Every Task
Specifications:
- Brand: Taylor
- Product Type: Digital Timer Clock
- Versatility: Suitable for cooking, studying, workouts, and more
- Accuracy: Ensures precise timing for all your activities
- Additional Features: Includes a countdown and count-up feature
- Colour: Sleek design to fit any decor style
- Interface: User-friendly with simple button controls
Package Includes:
1 x Taylor Dual Event Digital TimerDigital Timer Switch Programmable Timer Switch for Lights and Appliances – Quick Sense Digital Timer
Specifications:
- Type: Programmable Din Type Digital Timer Controller
- Voltage Compatibility: 16/240V AC, suitable for a wide range of household appliances
- Programmable Settings: Offers both daily and weekly programming options for flexible scheduling
- Switch Type: Relay Switch, ensuring reliable operation for lights and appliances
- Application: Suitable for controlling lighting, fans, and other electronic devices, enhancing home automation and energy efficiency
Package Includes:
1 x Quick Sense 16/240V AC Programmable Din Type Digital Timer ControllerDigital Voltmeter Ammeter DC 0-100V 10A Dual LED Monitor Panel
Drone Kit Universal Tall Landing Gear Skid for DJI F450 F550 Sk480 Multirotor Quadcopter – Black
Dual Shaft BO Motor & Wheel (Set of 4) & Arduino UNO R3
PRODUCT OVERVIEW
- Operating Voltage 3V - 12V DC
- RPM Approximately 150 RPM
- No-load current 40 - 80 mA
- Output Torque 3.5 kg-cm
- High-quality plastic wheel and BO-series motor
- Plastic Wheels with a slot that matches BO Motor Shaft are made to work with BO motors in both Series I and II.
- 66mm diameter, 20mm width
- Operating Voltage: 5 V
- Sonar Sensing Range: 2-400 cm
- Max. Sensing Range: 450 cm
- Frequency: 40 kHz
- Operating voltage: 3.0V~ 7.2V
- Stall torque @4.8V : 1.2kg-cm
- Stall torque @6.6V: 1.6kg
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 4 x BO Motor
- 4 x BO Wheel
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
Dual Shaft BO Motor With BO Wheel (Yellow)
PRODUCT OVERVIEW
- Kit Contains:Double shaft bo motor with wheel
- Operating Voltage 3V - 12V DC
- RPM Approximately 150 RPM
- No load current 40 - 80 mA
- Output Torque 3.5 kgf.cm
- High quality plastic wheel and BO-series motor
- Plastic Wheels with a slot that matches BO Motor Shaft are made to work with BO motors both Series I and II.
- 66mm diameter, 20mm width
- 1 x BO Motor
- 1 x BO Wheel
Frontier TM619H2 Digital Timer Programmable Time Switch
PRODUCT OVERVIEW:-
- 17 on or off programs can be set per day
- Easy-to-replace battery
- Option to select specific days or days of the week for programmed functions to be performed
- LED power indicator
- Manual override switch
- LCD on-screen displays on and off switching status
- The lithium battery inside for memory backup
- Daily, weekly, and impulse programs
- Time switch with LCD display 4-pin
- Easy connection settings.
Package Includes:
- 1 x Frontier Digital Programmable Timer
- 1 x Instruction Manual
GE MyTouchsmart Indoor Plug-In Digital Timer Switch
Specifications:
- Type: Indoor Plug-In Digital Timer Switch
- Compatibility: Works with lamps, seasonal lighting, small appliances, and more
- Programming: Customizable on/off timer schedules for daily routines
- Installation: Easy plug-and-play setup with no wiring required
- Display: Digital interface for straightforward programming
- Countdown Feature: Includes options for countdown timing for added convenience
Package Includes:
1 x MyTouchSmart Indoor Plug-In Digital Timer SwitchIR Sensor Module – Infrared Obstacle Avoidance Sensor
PRODUCT OVERVIEW:-
- Easy to assemble and use
- Onboard detection indication
- The effective distance range of 2cm to 80cm
- There is an obstacle, the green indicator light on the circuit board.
- 3-5V DC power supply module can be used. When the power is turned on, the red power LED is lit.
Package Includes:
1 x IR Sensor ModuleJumper Wires M-M, M-F, F-F, 20cm, 120 Pieces
PRODUCT OVERVIEW
- 40P color DuPont line
- Length: 300mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 120 pcs chromatic color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
- 1 x 40 pcs Male to Male jumper wire set
- 1 x 40 pcs Male to Female jumper wire set
- 1 x 40 pcs Female to Female jumper wire set
Jumper Wires M-M, M-F, F-F, 20cm, 60 Pieces
Specifications:
- Quantity: 60 pieces
- Length: 20cm each
- Wire Type: Male-to-male, male-to-female, female-to-female
- Compatibility: Suitable for use with breadboards and Arduino
- Material: High-quality copper core with PVC insulation
- Color: Assorted colors for easy identification
- Application: Ideal for electronics prototyping, DIY projects, and circuit design
- Flexibility: Flexible and durable wires for easy handling
- 1 x 20pcs Male to Male Jumper Wire set
- 1 x 20pcs Male to Female Jumper Wire set
- 1 x 20pcs Female to Female Jumper Wire set
L293D Motor Driver Shield Or Servo Shield For Arduino
L298N Motor Driver Module with PWM Control
PRODUCT OVERVIEW
- Driver chip: L298 dual H-bridge driver chip.
- Operates up to 35V DC.
- Drive part of the peak current Io: 2A / Bridge.
- The logical part of the terminal power supply range Vss:4.5V-5.5V
- The logical part of the operating current range: 0 ~ 36mA.
- Maximum power consumption: 20W.
- Current Sense for each motor.
- Heatsink for better performance.
- Power-On LED indicator.
- Drives up to 4 motors.
Leyden Smart Digital Electronic Programmable Switch Timer
Specifications:
- Model: Leyden Smart Digital Electronic Programmable Switch
- Type: Digital Timer Switch
- Voltage: 230Volts
- Easy Setup: User-friendly interface for simple installation
- Programmable: Set multiple timer settings for different devices.
- Convenient: Say goodbye to manual switching with this electronic timer
Package Includes:
1 x Leyden Smart Digital Electronic Programmable SwitchMAX7219 Dot Matrix LED Display Module for Arduino Uno
Specifications:
- Model: MAX7219 Dot Matrix LED Display Module
- Input Voltage: 5V
- LED Display: Supports dot matrix displays and 7 segment digital displays
- Control Interface: Serial interface
- Compatibility: Arduino, ARM, Raspberry Pi, and other microcontrollers
- Cascadable: Can be cascaded to control multiple displays
- Maximum Display Size: 8x8 for dot matrix displays
- Dimensions: 5.4cm x 3.2cm x 1.5cm
- Weight: 10g
Package Includes:
1 x MAX7219 Dot Matrix LED Display ModuleMB102 830 Points Breadboard with 65Pcs Jumper Wires
PRODUCT OVERVIEW:-
- 830 point solderless breadboard layout for ample space and Versatility.
- Durable construction with precision machined contacts for excellent electrical connectivity.
- Multiple sections for easy organization of Parts.
- 65 high-quality male to male jumper wires for hassle free connections.
- Different colors for easy recognition and organization.
Package Includes:
- 1 x MB102 830 Points Solderless Prototype PCB Breadboard
- 1 x 65 Male to Male Jumper Wires
MB102 830 Points Solder-less Prototype PCB Breadboard
Micro USB Cable USB-2.0 Mini B Cable for Arduino Nano
Specifications:
- Cable Type: Micro USB
- Connector Type: USB-2.0 Mini B
- Length: 20 cm
- Compatibility: Arduino Nano and other devices with USB-2.0 Mini B ports
- Features: Plug-and-Play, Durable Construction, High-Speed Data Transfer
- Material: PVC
- Color: Blue
Package Includes:
1 x Micro USB Cable USB-2.0 Mini B Cable for Arduino Nano (20 cm)Nano Board Unsoldered with USB Cable for Arduino
Specifications:
- Microcontroller: ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 14 (6 provide PWM output)
- Analog Input Pins: 8
- SRAM: 2 KB (ATmega328)
- EEPROM: 1 KB (ATmega328)
- Clock Speed: 16 MHz
- USB Chip: CH340G
- Dimensions: 45mm x 18mm
- Weight: 7g
Package Includes:
1 x Nano Board R3 CH340 Chip 1 x USB Mini CableNodeMCU ESP8266 CP2102 Board – IoT Development Board
NodeMCU ESP8266 V3 Lua CH340 Wi-Fi Development Board
Specifications:
- NodeMCU ESP8266 V3 with CH340 chipset.
- Microcontroller: ESP8266
- USB-to-Serial Converter: CH340
- WiFi Connectivity: 802.11 b/g/n at 2.4GHz
- Security Protocols: Supports WPA/WPA2
- Operating Modes: STA/AP/STA+AP
- Programming: Supports programming via Lua script or Arduino IDE
- Flash Memory: 4MByte
Package Includes:
1 x NodeMCU ESP8266 V3 Lua CH340 WiFi Development BoardNRF24L01 Module – 2.4GHz Wireless Transceiver
RFID Sensor Module RC522 for Secure and Efficient Card Reading
Specifications of RFID Sensor RC522:
- Integrated MF RC522 chip for efficient RFID reading
- Operates at 13.56MHz for high-speed communication
- Low-voltage, cost-effective, compact design
- Non-contact card chip with up to 60mm reading distance
- Supports SPI protocol for easy CPU integration
- Ideal for smart meters, handheld devices, access control
- 1 x RFID-RC522 Reader/Writer Module
- 1 x Standard blank RFID card
- 1 x Straight header strip
- 1 x Right-angle header strip
- 1 x Special-shaped key-chain RFID tag
SIM800L GSM Module TTL Serial Port Micro SIM Card Core Board
STM32F103C8T6 Microcomputer STM32 Microcontroller Board
Specifications:
- Microcontroller: STM32F103C8T6 ARM Cortex-M3
- Operating Voltage: 3.3V
- Input Voltage: 7V - 12V
- Digital I/O Pins: 37
- Analog Input Pins: 10
- Flash Memory: 64KB
- SRAM: 20KB
- Clock Speed: Up to 72MHz
- Communication: UART, SPI, I2C
- Programming: Compatible with Arduino IDE
- Dimensions: 52mm x 22mm
Package Includes:
1 x STM32F103C8T6 Minimum System BoardTowerPro SG90 Micro Servo Motor – 180 degree Rotation
TowerPro SG90 Servo Motor with Ultrasonic Sensor
PRODUCT OVERVIEW
- Ultrasonic Operating Voltage(VDC): 3.2 – 5.2
- SG90 Operating Voltage: 3.0 – 7.2V
- Ultrasonic weight (gm): 10
- SG90 weight (gm): 9
- Ultrasonic Measurement Range: 3cm to 350Cm
- SG90 Rotational Degree: 180
- 1 x Ultrasonic Sensor HC-SR04
- 1 x TowerPro SG90 Servo Motor with Cable
- 1 x Set of Horns
- 1 x Set of Screws
Ultrasonic Sensor HC-SR04 Module Distance Sensor
Specifications:
- Model: HC-SR04
- Operating Voltage: 5V DC
- Operating Current: <15mA
- Operating Frequency: 40kHz
- Measuring Range: 2cm - 400cm
- Accuracy: Up to 3mm
- Operating Temperature: -15°C to 70°C
- Storage Temperature: -20°C to 80°C
- Dimensions: 45mm x 20mm x 15mm
- Weight: 10g
Ultrasonic Sensor with SG90 Motor and 10 pcs M-F Jumper Wire
PRODUCT OVERVIEW
- Ultrasonic Operating Voltage(VDC): 3.2 – 5.2
- SG90 Operating Voltage: 3.0 – 7.2V
- Ultrasonic weight (gm): 10
- SG90 weight (gm): 9
- Ultrasonic Measurement Range: 3cm to 350Cm
- SG90 Rotational Degree: 180
- Jumper Wire Compatible with 2.54mm spacing pin headers
- Jumper Wire Durable and reusable
- 1 x Ultrasonic Sensor HC-SR04
- 1 x TowerPro SG90 Servo Motor with Cable
- 1 x Set of Horns
- 1 x Set of Screws
- 1 x 10Pcs Male to Female Jumper Wire
Universal Tall Landing Gear Skid for DJI F450 F550 SK480 – White
Unsoldered Nano V3.0 ATmega328P Compatible with Arduino
Specifications:
- Microcontroller: ATmega328P
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 8
- DC Current per I/O Pin: 40 mA
- Flash Memory: 32 KB (ATmega328P), of which the bootloader uses 0.5 KB
- SRAM: 2 KB (ATmega328P)
- EEPROM: 1 KB (ATmega328P)
- Clock Speed: 16 MHz
- Dimensions: 18.5mm x 43.2mm
- Weight: 5g
Package Includes:
1 x Arduino Nano Unsoldered V3 ATmega328P CH340 ChipUSB Cable for Arduino UNO and MEGA (USB A to B)
Specifications:
- Cable Type: USB A to B cable
- Length: 30cm
- Colour: Blue
- Weight: 25 gm
- Compatibility: Arduino Uno R3 and Arduino Mega
- Usage: Data transfer and power supply to Arduino boards
- Convenience: Micro USB design for easy connection and disconnection
- Material: High-quality, durable
- Certification: RoHS compliant
Package Includes:
1 x USB Cable for Arduino UNO and MEGA (USB A to B)W1209 Digital Temperature Controller Thermostat Sensor
PRODUCT OVERVIEW:
- Temperature Control Range(°C): -50 to +110
- Resolution @-9.9°C to +99.9°C: 0.1°C
- Resolution @all temperatures: 1°C
- Accuracy: 0.1°C
- Refresh Rate(s): 0.5
- Supply Voltage(V): 12
- Measuring Inputs: NTC10K
- Cable Length: 0.5 Meter
- Output Type: 1 Channel Relay Output
- Capacity: 10A
XH-W3001 AC 220V 1500W Digital Display Temperature Controller
PRODUCT OVERVIEW:
- Output type: AC Output (AC 220V 1500W).
- Output capacity: MAX temperature measurement, display; refrigeration, heating control
- Temperature setting upper and lower limits
- Simple operation, suitable for seafood machines.
- Upper key: The start temperature is displayed in one press, and a long press to set the start temperature.
- Lower key: The stop temperature is displayed in one press, and long press to set stop temperature.
- Control Accuracy: Upto 0.1℃.