IR Infrared Sensor Module has great adaptive capability of the ambient light, having a pair of an infrared transmitter and a receiver tube, the infrared emitting tube emits a certain frequency, encounters an obstacle detection direction (reflecting surface), infrared is reflected back to the receiver tube receiving, after a comparator circuit processing, the green LED lights up, while the signal output will output digital signal (a low-level signal), through the potentiometer knob to adjust the detection distance, the effective distance range 2 ~ 10cm working voltage of 3.3V-5V. The detection range of the sensor can be adjusted by the potentiometer, with little interference, easy to assemble, easy to use features, and can be widely used for robot obstacle avoidance, obstacle avoidance car assembly line count, black-and-white line tracking, and many other occasions.
To know more about the working of IR Sensor read IR Sensor Working here
Vayuyaan believes in satisfied customers, so whatever the product is, we first import them and then test them for their supplier-defined and standard capabilities. After all the possible quality checks, we make the product available to our customers.
Features of IR Sensor Module :
- Easy to assemble and use
- Onboard detection indication
- The effective distance range of 2cm to 80cm
- A preset knob to fine-tune the distance range
- There is an obstacle, the green indicator light on the circuit board.
- When the module detects obstacles in front of the signal, the circuit board green indicator light level, while the OUT port continuously outputs low-level signals, the module detects a distance of 2 ~ 10cm, a detection angle of 35°, and the detection distance can be a potential adjustment with adjustment potentiometer clockwise, the increase in detection distance; counter-clockwise adjustment potentiometer, the detection distance decreased.
- The sensor’s active infrared reflection detection, target reflectivity, and shape of the detection distance of the key. The black minimum detection range, white maximum; small area object distance is small, a large area from the large.
- The sensor module output port OUT can be directly connected with the microcontroller IO port and can also be driven directly to a 5V relay;
- A 3-5V DC power supply module can be used. When the power is turned on, the red power LED is lit.
- With screw holes of 3mm, easy to install.
Interface (3-wire):-
- VCC external 3.3V-5V voltage (can be directly connected with the 5v microcontroller and 3.3v microcontroller).
- GND external GND.
- OUT board digital output interface (0 and 1).
Nitesh –
Great product checked IR sensor with arduino uno… This IR sensor is working fine….
Priya –
Product is good… Small size and works properly… Ir sensor is worth to buy…
Mohan –
Found best deal on your site for IR sensor