Showing all 47 results

1000KV Motor with 30A ESC and 1045 Propeller Set For RC Plane

899.00
PRODUCT OVERVIEW:
  • The steel design is capable of withstanding competitional conditions.
  • Lightweight design makes them suitable for a wide range of Quad-copters and Hexacopter Frames.
  • Compact size.
  • Offers great performance and value for money.
  • Smooth throttle response for best RC experience.
  • ESC used has an On-Board BEC.
  • Faster and Better speed control.

Package Includes:

  • 1 x A2212 10T 13T 1000KV Brushless Motor for Drone with Soldered Connector
  • 4 x Prop Adapter
  • Motor Holder (X-type) and set of screws
  • 1 x ESC 30A BLDC ESC
  • 2 x 1045(10×4.5) SF Propellers (1CW, 1CCW).
  • 2 x Sets of prop reducers.

1045/1045R 10 inch Propeller Pair (CW+CCW), Black

65.00
PRODUCT OVERVIEW
  • Length: 10″.
  • Pitch: 4.5″.
  • Weight: 28 gm.
  • Shaft Diameter: 9.5 mm.
  • Total Length: 10 inch / 250 mm
  • Material: Carbon Nylon
Package Includes:
  • 1 x Counter-Clockwise (CCW) Propellers 1045 (10×4.5)
  • 1 x Clockwise (CW) Propellers 1045 (10×4.5)
  • Set of prop Reducers

1045/1045R 10 inch Propeller Pair (CW+CCW), Black (Set of 2)

119.00
PRODUCT OVERVIEW
  • Length: 10″.
  • Pitch: 4.5″.
  • Weight: 28 gm.
  • Shaft Diameter: 9.5 mm.
  • Total Length: 10 inch / 250 mm
  • Material: Carbon Nylon
Package Includes:
  • 2 x Counter-Clockwise (CCW) Propellers 1045 (10×4.5)
  • 2 x Clockwise (CW) Propellers 1045 (10×4.5)
  • Set of prop Reducers

1045/1045R 10 inch Propeller Pair (CW+CCW), Black (Set of 5)

289.00
PRODUCT OVERVIEW
  • Length: 10″.
  • Pitch: 4.5″.
  • Weight: 28 gm.
  • Shaft Diameter: 9.5 mm.
  • Total Length: 10 inch / 250 mm
  • Material: Carbon Nylon
Package Includes:
  • 5 x Counter-Clockwise (CCW) Propellers 1045 (10×4.5)
  • 5 x Clockwise (CW) Propellers 1045 (10×4.5)
  • Set of prop Reducers

2200mAH Lipo Battery 11.1v for Quadcopter Plane Multirotor

1,650.00
PRODUCT OVERVIEW
  • It has three cells and outputs 11.1V storing 2200mAh of charge.
  • It’s a high power output battery
  • It has a very special internal structure, which requires a dedicated balance charger to charge.
  • Li-Poly Battery Charger is a suitable mate.
Package Included: 1 x 11.1V 2200MAH Lipo Battery

30A ESC – Electronic Speed Controller With Dean Connector

410.00
PRODUCT OVERVIEW
  • Constant Current: 30A (Max 40A<10s).
  • BEC: 5V 3A.
  • Input Voltage: 11.1 ~ 11.7 V.
  • Li-Po battery: 2S ~ 3S.
  • Ni-MH 4-10 CELLS Auto-Detect
Package Includes: 1 x ESC 30A Simonk Electronic Speed Controller with Connectors.

30A ESC Electronic Speed Controller With Dean Connector (Set of 4)

1,949.00
PRODUCT OVERVIEW
  • Constant Current: 30A (Max 40A<10s).
  • BEC: 5V 3A.
  • Input Voltage: 11.1 ~ 11.7 V.
  • Li-Po battery: 2S ~ 3S.
  • Ni-MH 4-10 CELLS Auto-Detect
Package Includes: 4 x ESC 30A Simonk Electronic Speed Controller with Connectors.

30A ESC Simonk Electronic Speed controller with Connector (Set of 4)

2,111.00
PRODUCT OVERVIEW
  • Model: SIMONK 30A.
  • Constant Current: 30A (Max 40A < 10 sec).
  • BEC: 5V 2A.
  • Suitable Batteries: 2-3S LiPo.
  • Application: BLDC Motors, Multirotor, Rc Planes, etc.
Package Includes: 4 x Simonk 30A BLDC ESC Electronic Speed Controller

30A ESC Simonk Electronic speed controller with Dean Connector

415.00
PRODUCT OVERVIEW
  • Model: SIMONK 30A.
  • Constant Current: 30A (Max 40A < 10 sec).
  • BEC: 5V 2A.
  • Suitable Batteries: 2-3S LiPo.
  • Application: BLDC Motors, Multirotor, Rc Planes, etc.
Package Includes: 1 x Simonk 30A BLDC ESC Electronic Speed Controller

3dBi Magnetic Mount Antenna for GSM FCT Device (10 Feet Long)

169.00
PRODUCT OVERVIEW
  • Frequency (MHz): 2400 – 2500MHz
  • Gain: 3 dBi
  • Impedance (Ω): 50
  • Connector: SMA- Male
  • VSWR :< 2.0
Package Includes: 1 x GSM 3dBi Magnetic Spring Antenna 2400 – 2483 MHz (10 Feet Long Wire)

40 Pin Dupont Female to Female Jumper Wire, 40 Pieces

69.00
PRODUCT OVERVIEW
  • 40P color jumper wires
  • Length: 300mm
  • Weight: 45 gm
  • Compatible with 2.54mm spacing pin headers
  • High quality and in good working condition
  • Durable and reusable
  • Easy to install and use
Package includes : 1 x 30 CM Dupont Wire Multi-Color, Female to Female Jumper Wire 40 PCS

40 Pin Dupont Male to Female Jumper Wire, 40 Pieces

69.00
PRODUCT OVERVIEW:
  • 40 P color DuPont line
  • Weight: 45 gm
  • Compatible with 2.54mm spacing pin headers
  • 40 pcs chromatic male to female color jump wire
  • High quality and in good working condition
  • Durable and reusable
  • Easy to install and use
Package includes : 1 x 30 CM Dupont Wire Multi-Color Jumper Cable,  Male to Female Jumper Wire 40 PCS

40 Pin Dupont Male to Male Jumper Wire, 40 Pieces

75.00
PRODUCT OVERVIEW:
  • 40P color DuPont line
  • Weight: 45 gm
  • Compatible with 2.54mm spacing pin headers
  • 40pcs chromatic male to male color jumper wire
  • High quality and in good working condition
  • Durable and reusable
  • Easy to install and use
Package includes : 1 x 30 CM Dupont Wire Multi-Color Jumper Cable, Male to Male Jumper Wire 40 PCS

58mm Bluetooth Thermal Printer

2,799.00
PRODUCT OVERVIEW:-
  • Easy connectivity with mobile Bluetooth.
  • USB / Bluetooth interface available.
  • The 58mm Bluetooth thermal receipt printer support cash drawer driving.
  • Compatible ESC/pos print commands, support bitmap, and download graphics printing.
  • Quality printing low noise and high-speed printing.
  • Easy install - the USB pos printer is simple and convenient to operate.
  • Quick and easy paper change with low maintenance cost.

Package Includes:

  • 1 x 58mm Bluetooth Thermal Printer
  • 1 x USB Cable
  • 1 x Power Cable
  • 1 x CD Drive
  • 1 x User Manual

58mm Thermal Receipt Printer

1,899.00
PRODUCT OVERVIEW:-
  • The 58mm thermal receipt printer support cash drawer driving.
  • Quality printing low noise and high-speed printing.
  • Quick and easy paper change with low maintenance cost.
  • Easy install - the USB POS printer is simple and convenient to operate.
  • Compatible ESC/POS print commands, support bitmap, and download graphics printing.

Package Includes:

  • 1 x 58mm Thermal Printer
  • 1 x USB Cable
  • 1 x Power Cable
  • 1 x CD Drive
  • 1 x User Manual

65mm BO Wheels, Robot Wheel For BO Motors

49.00
PRODUCT OVERVIEW
  • A tire with sponge liner for more strength
  • With upgraded tire tread for greater friction
  • New design wheel for better combination with the motor
  • Diameter: 65 mm
  • The material of Wheel: High-strength plastic
  • The material of Tyre: Rubber
  • Color: Yellow
Package Includes: 1 x 65mm Robot Wheel for BO Motors

A2212 1000KV BLDC Motor With Soldered Bullet Connector

399.00
PRODUCT OVERVIEW
  • Motor KV: 1000
  • Current Capacity: 12A/60S
  • LiPO Batteries: 2S-3S
  • Efficiency Current: 4-10A
  • Shaft Diameter: 3.17 mm
  • Prop Adapter is quality tested before shipping to customers.
Package Includes :
  • 1 x A2212 1000Kv Brushless Motor for Drone
  • 1 x Prop Adapter
  • A Motor Holder (X-type) and set of screws

A2212 1000KV BLDC Motor With Soldered Bullet Connector (Set of 4)

1,575.00
PRODUCT OVERVIEW
  • Motor KV: 1000
  • Current Capacity: 12A/60S
  • LiPO Batteries: 2S-3S
  • Efficiency Current: 4-10A
  • Shaft Diameter: 3.17 mm
  • Prop Adapter is quality tested before shipping to customers.
Package Includes :
  • 4 x A2212 1000Kv Brushless Motor for Drone
  • 4 x Prop Adapter
  • A Motor Holder (X-type) and set of screws

A2212 1400KV BLDC Motor With Soldered Bullet Connector

405.00
PRODUCT OVERVIEW
  • Motor KV: 1000
  • Current Capacity: 12A/60S
  • LiPO Batteries: 2S-3S
  • Efficiency Current: 4-10A
  • Shaft Diameter: 3.17 mm
  • Prop Adapter is quality tested before shipping to customers.
Package Includes :
  • 1 x A2212 1000Kv Brushless Motor for Drone
  • 1 x Prop Adapter
  • A Motor Holder (X-type) and set of screws

A2212 1400KV BLDC Motor With Soldered Bullet Connector (Set of 4)

1,590.00
PRODUCT OVERVIEW
  • Motor KV: 1000
  • Current Capacity: 12A/60S
  • LiPO Batteries: 2S-3S
  • Efficiency Current: 4-10A
  • Shaft Diameter: 3.17 mm
  • Prop Adapter is quality tested before shipping to customers.
Package Includes :
  • 1 x A2212 1000Kv Brushless Motor for Drone
  • 1 x Prop Adapter
  • A Motor Holder (X-type) and set of screws

Arduino UNO R3 & Ultrasonic Sensor With SG90 Motor and Jumper Wires

1,329.00
PRODUCT OVERVIEW
  • Ultrasonic Operating Voltage(VDC): 3.2 – 5.2
  • SG90 Operating Voltage: 3.0 – 7.2V
  • Ultrasonic weight (gm): 10
  • SG90 weight (gm): 9
  • Ultrasonic Measurement Range: 3cm to 350Cm
  • SG90 Rotational Degree: 180
  • Jumper Wire Compatible with 2.54mm spacing pin headers
  • Jumper Wire Durable and reusable
  • Micro-controller : ATmega328.
  • Operating Voltage: 5V.
  • Input Voltage (recommended) : 7-12V.
  • Digital I/O Pins: 14 (of which 6 provide PWM output).
  • Analog Input Pins: 6
Package Includes:
  • 1 x Ultrasonic Sensor HC-SR04
  • 1 x TowerPro SG90 Servo Motor with Cable
  • 1 x SG90 Set of Horns
  • 1 x SG90 Set of Screws
  • 1 x 40 pcs Male to Male jumper wire set
  • 1 x 40 pcs Male to Female jumper wire set
  • 1 x 40 pcs Female to Female jumper wire set
  • 1 x Arduino Uno R3 Development Board
  • 1 x USB Cable

Arduino Uno R3 Development Board ATmega328P With USB Cable

899.00
Product Overview:
  • Micro-controller : ATmega328.
  • Operating Voltage: 5V.
  • Input Voltage (recommended) : 7-12V.
  • Digital I/O Pins: 14 (of which 6 provide PWM output).
  • Analog Input Pins: 6
Package  Includes :
  • 1 x Arduino Uno R3 Development Board
  • 1 x USB Cable

Arduino Uno R3 with Jumper Wires 120 Pcs

1,159.00
PRODUCT OVERVIEW
  • Micro-controller : ATmega328.
  • Operating Voltage: 5V.
  • Input Voltage (recommended) : 7-12V.
  • Digital I/O Pins: 14 (of which 6 provide PWM output).
  • Analog Input Pins: 6
  • 40P color DuPont line
  • Length: 300mm
  • Weight: 20~25 gm each
  • Compatible with 2.54mm spacing pin headers
  • 120 pcs chromatic color jump wire
  • High quality and in good working condition
  • Durable and reusable
  Package Includes:
  • 1 x Arduino Uno R3 Development Board
  • 1 x USB Cable
  • 1 x 40 pcs Male to Male jumper wire set
  • 1 x 40 pcs Male to Female jumper wire set
  • 1 x 40 pcs Female to Female jumper wire set

Arduino Uno R3 With Jumper Wires 60 Pieces

999.00
Product Overview:
  • Micro-controller : ATmega328.
  • Operating Voltage: 5V.
  • Input Voltage (recommended) : 7-12V.
  • Digital I/O Pins: 14 (of which 6 provide PWM output).
  • Analog Input Pins: 6
  • 40P color DuPont line
  • Length: 300mm
  • Weight: 20~25 gm each
  • Compatible with 2.54mm spacing pin headers
  • 120 pcs chromatic color jump wire
  • High quality and in good working condition
  • Durable and reusable
Package  Includes :
  • 1 x Arduino Uno R3 Development Board
  • 1 x USB Cable
  • 1 x 20 pcs Male to Male jumper wire set
  • 1 x 20 pcs Male to Female jumper wire set
  • 1 x 20 pcs Female to Female jumper wire set

Automatic Hand Sanitizer Machine IR Sensor, Water Pump, Relay Module

199.00
PRODUCT OVERVIEW
  • Operating voltage : 5v dc
  • Ir Infrared obstacle avoidance sensor module dc 3v to 6v submersible pump
  • Make your own automatic sanitizer at home by using this kit and protect yourself.
  • Package content: DIY kit automatic hand sanitizer dispenser machine IR sensor, submersible water pump, relay module.
Package Includes:
  • 1 x DC Water Pump
  • 1 x 1 Channel Relay
  • 1 x IR Sensor
  • 1 x Pipe
  • 3 x Cable Tie

BO Motor, BO Wheel & Arduino UNO R3 with Jumper Wires 60 Pcs

1,199.00
Product Overview:
  • Micro-controller : ATmega328.
  • Operating Voltage: 5V.
  • Input Voltage (recommended) : 7-12V.
  • Digital I/O Pins: 14 (of which 6 provide PWM output).
  • Analog Input Pins: 6
  • 40P color DuPont line
  • Length: 300mm
  • Weight: 20~25 gm each
  • Compatible with 2.54mm spacing pin headers
  • 60 pcs chromatic color jumper wire
  • High quality and in good working condition
  • Durable and reusable
Package  Includes :
  • 1 x Arduino Uno R3 Development Board
  • 1 x USB Cable
  • 1 x 20 pcs Male to Male jumper wire set
  • 1 x 20 pcs Male to Female jumper wire set
  • 1 x 20 pcs Female to Female jumper wire set
  • 4 x BO Motor
  • 4 x BO Wheel

DC 3.7-6V To 400KV Boost Step Up Power Module

209.00
PRODUCT OVERVIEW
  • Input Voltage: DC3.6V-6V
  • Input Current: 2A-5A
  • Output Voltage: DC 400KV (Please pay attention to safety when used)
  • Input Line Length: about 100mm (red is positive)
  • Output Line Length: about 160mm
Package Includes: 1 x 400KV Step Up Power Module

DC BO Motor 12V Dual Shaft – Straight

59.00
PRODUCT OVERVIEW
  • Low density: lightweight, low inertia.
  • Capability to absorb shock and vibration as a result of elastic compliance.
  • Ability to operate with minimum or no lubrication, due to inherent lubricity.
  • The relatively low coefficient of friction.
  • Operating Voltage (VDC): 3~12
  • Shaft Length (mm): 8.5
  • Shaft Diameter (mm): 5.5 (Double D-type)
  • No Load Current: 40-180mA.
  • Rated Speed(After Reduction): 100 RPM
  • Rated Torque: 0.35 Kg cm
Package Includes: 1 x BO MOTOR FOR BO WHEEL

DC Dual Shaft BO Gear Motor & Wheel With SG90 Servo Motor

439.00
PRODUCT OVERVIEW
  • Operating Voltage 3V - 12V DC
  • RPM Approximately 150 RPM
  • No load current 40 - 80 mA
  • Output Torque 3.5 kgf.cm
  • High quality plastic wheel and BO-series motor
  • Plastic Wheels with a slot that matches BO Motor Shaft are made to work with BO motors both Series I and II.
  • 66mm diameter, 20mm width
  • Operating Voltage: 5 V
  • Sonar Sensing Range: 2-400 cm
  • Max. Sensing Range: 450 cm
  • Frequency: 40 kHz
  • Operating voltage: 3.0V~ 7.2V
  • Stall torque @4.8V : 1.2kg-cm
  • Stall torque @6.6V: 1.6kg-
Package Includes:
  • 4 x BO Motor
  • 4 x BO Wheel
  • 1 x HC-SR04 Ultrasonic Sensor
  • 1 x Towerpro SG90 Mini Servo Motor

DC Dual Shaft BO Motor & Wheel with SG90 Motor and Ultrasonic Sensor

499.00
PRODUCT OVERVIEW
  • Operating Voltage 3V - 12V DC
  • RPM Approximately 150 RPM
  • No load current 40 - 80 mA
  • Output Torque 3.5 kgf.cm
  • High quality plastic wheel and BO-series motor
  • Plastic Wheels with a slot that matches BO Motor Shaft are made to work with BO motors both Series I and II.
  • 66mm diameter, 20mm width
  • Operating Voltage: 5 V
  • Sonar Sensing Range: 2-400 cm
  • Max. Sensing Range: 450 cm
  • Frequency: 40 kHz
  • Operating voltage: 3.0V~ 7.2V
  • Stall torque @4.8V : 1.2kg-cm
  • Stall torque @6.6V: 1.6kg-
Package Includes:
  • 4 x BO Motor
  • 4 x BO Wheel
  • 1 x HC-SR04 Ultrasonic Sensor
  • 1 x Towerpro SG90 Mini Servo Motor

Digital Voltmeter Ammeter DC 0-100V 10A Dual LED Monitor Panel

229.00
PRODUCT OVERVIEW
  • Operating Voltage: 5V DC
  • Current Consumption: <60mA
  • Testing Voltage: 0-100V
  • Testing Current: 1-50A
  • Easy to read even in dim light
Package Includes: 1 x Digital Voltmeter Ammeter Monitor Panel

Dual Shaft BO Motor & Wheel (Set of 4) & Arduino UNO R3

1,129.00
PRODUCT OVERVIEW
  • Operating Voltage 3V - 12V DC
  • RPM Approximately 150 RPM
  • No-load current 40 - 80 mA
  • Output Torque 3.5 kg-cm
  • High-quality plastic wheel and BO-series motor
  • Plastic Wheels with a slot that matches BO Motor Shaft are made to work with BO motors in both Series I and II.
  • 66mm diameter, 20mm width
  • Operating Voltage: 5 V
  • Sonar Sensing Range: 2-400 cm
  • Max. Sensing Range: 450 cm
  • Frequency: 40 kHz
  • Operating voltage: 3.0V~ 7.2V
  • Stall torque @4.8V : 1.2kg-cm
  • Stall torque @6.6V: 1.6kg
  • Micro-controller : ATmega328.
  • Operating Voltage: 5V.
  • Input Voltage (recommended) : 7-12V.
  • Digital I/O Pins: 14 (of which 6 provide PWM output).
  • Analog Input Pins: 6
Package Includes:
  • 4 x BO Motor
  • 4 x BO Wheel
  • 1 x Arduino Uno R3 Development Board
  • 1 x USB Cable

Dual Shaft BO Motor With BO Wheel (Yellow)

99.00
PRODUCT OVERVIEW
  • Kit Contains:Double shaft bo motor with wheel
  • Operating Voltage 3V - 12V DC
  • RPM Approximately 150 RPM
  • No load current 40 - 80 mA
  • Output Torque 3.5 kgf.cm
  • High quality plastic wheel and BO-series motor
  • Plastic Wheels with a slot that matches BO Motor Shaft are made to work with BO motors both Series I and II.
  • 66mm diameter, 20mm width
Package Includes:
  • 1 x BO Motor
  • 1 x BO Wheel

F450 Tri Colour Quadcopter Frame With PCB Board VT400 – ‘MADE IN INDIA’

690.00
PRODUCT OVERVIEW
  • MADE IN INDIA TRI COLOUR F450 Quadcopter Frame
  • Built from quality glass fiber and polyamide-nylon
  • Pre-threaded brass sleeves for all of the frame bolts
  • Colored arms for orientation to keep you flying in the right direction
  • Large mounting tabs on main frame bottom plate for easy camera mounting
Package Includes:
  • 1 x F450 tri-color Made In INDIA Quadcopter Frame
  • 1 x PCB Board
  • 2 x Orange arms
  • 2 x Green Arms
  • Set of Screws
Video Tutorial

Infrared Obstacle Avoidance Sensor – IR Sensor Module

49.00
PRODUCT OVERVIEW:-
  • Easy to assemble and use
  • Onboard detection indication
  • The effective distance range of 2cm to 80cm
  • There is an obstacle, the green indicator light on the circuit board.
  • 3-5V DC power supply module can be used. When the power is turned on, the red power LED is lit.
Package Includes: 1 x IR Sensor Module

Jumper Wires M-M, M-F, F-F, 20cm, 120 Pieces

179.00
PRODUCT OVERVIEW
  • 40P color DuPont line
  • Length: 300mm
  • Weight: 20~25 gm each
  • Compatible with 2.54mm spacing pin headers
  • 120 pcs chromatic color jump wire
  • High quality and in good working condition
  • Durable and reusable
  • Easy to install and use
Package Includes:
  • 1 x 40 pcs Male to Male jumper wire set
  • 1 x 40 pcs Male to Female jumper wire set
  • 1 x 40 pcs Female to Female jumper wire set

Jumper Wires M-M, M-F, F-F, 20cm, 60 Pieces

99.00
PRODUCT OVERVIEW
  1. 40P color DuPont line
  2. Length: 300mm
  3. Weight: 20~25 gm each
  4. Compatible with 2.54mm spacing pin headers
  5. 60 pcs chromatic color jump wire
  6. High quality and in good working condition
  7. Durable and reusable
  8. Easy to install and use
Package Includes:
  • 1 x 20pcs Male to Male jumper wire set
  • 1 x 20pcs Male to Female jumper wire set
  • 1 x 20pcs Female to Female jumper wire set

L293D Motor Driver Shield Or Servo Shield For Arduino

188.00
PRODUCT OVERVIEW
  • Capable of Driving 2 Stepper or DC motor
  • Bidirectional Control
  • Motor Voltage rating: 4.5V to 25V
  • Can also drive servo motor
  • High efficiency and simple usage
  • Continuous Output current 1.2A
Package Includes: 1 x L293D Motor Driver/Servo Shield for Arduino

L298N Motor Driver Module with PWM Control

169.00
PRODUCT OVERVIEW
  • Driver chip: L298 dual H-bridge driver chip.
  • Operates up to 35V DC.
  • Drive part of the peak current Io: 2A / Bridge.
  • The logical part of the terminal power supply range Vss:4.5V-5.5V
  • The logical part of the operating current range: 0 ~ 36mA.
  • Maximum power consumption: 20W.
  • Current Sense for each motor.
  • Heatsink for better performance.
  • Power-On LED indicator.
  • Drives up to 4 motors.
Package Includes: 1 x L298N Based Motor Driver Module – 2A (Standard Quality)

MB102 830 Points Solder-less Prototype PCB Breadboard

75.00
Product Overview:
  • Mb102 Bread Board
  • 830 Solder-less Points
  • Ideal for Experimenting With Circuit Design In Labs
  • Accept a variety of wire sizes 20-29 AWG
  • Completely reusable
  • Colored coordinates for easy components placement.
Package  Includes: 1 x Solderless Breadboard 830 Tie Points MB102

Micro DC 3-6V Submersible Mini Water Pump

69.00
PRODUCT OVERVIEW
  • Mini pump, delicate and light, very perfect for an experiment, aquarium, fish tank, and fountain, etc.
  • DC 3v to 6v submersible pump
  • Micro mini submersible water pump 3v to 6v
  • DC water pump for DIY
  • DC pumps for the HOBBY kit.
Package Includes: 1 x 3-6V Micro Submersible DC Water Pump

TowerPro SG90 Micro Servo Motor – 180 degree Rotation

169.00
PRODUCT OVERVIEW
  • Model: SG90
  • Weight: 9 gm
  • Operating voltage: 3.0V~ 7.2V
  • Servo Plug: JR
  • Stall torque @4.8V : 1.2kg-cm
  • Stall torque @6.6V: 1.6kg-
Package Includes: 
  • 1 x TowerPro SG90 Servo Motor with Cable
  • 1 x Set of Horns
  • 1 x Set of Screws

TowerPro SG90 Servo Motor with Ultrasonic Sensor

199.00
PRODUCT OVERVIEW
  • Ultrasonic Operating Voltage(VDC): 3.2 – 5.2
  • SG90 Operating Voltage: 3.0 – 7.2V
  • Ultrasonic weight (gm): 10
  • SG90 weight (gm): 9
  • Ultrasonic Measurement Range: 3cm to 350Cm
  • SG90 Rotational Degree: 180
Package Includes:
  • 1 x Ultrasonic Sensor HC-SR04
  • 1 x TowerPro SG90 Servo Motor with Cable
  • 1 x Set of Horns
  • 1 x Set of Screws

Ultrasonic Range Sensor HC-SR04 Sensor Module

79.00
PRODUCT OVERVIEW
  • Affordable Price
  • Operating Voltage: 5 V
  • Sonar Sensing Range: 2-400 cm
  • Max. Sensing Range: 450 cm
  • Frequency: 40 kHz
Package Includes: 1 x  Ultrasonic Sensor HC-SR04

Ultrasonic Sensor with SG90 Motor and 10 pcs M-F Jumper Wire

249.00
PRODUCT OVERVIEW
  • Ultrasonic Operating Voltage(VDC): 3.2 – 5.2
  • SG90 Operating Voltage: 3.0 – 7.2V
  • Ultrasonic weight (gm): 10
  • SG90 weight (gm): 9
  • Ultrasonic Measurement Range: 3cm to 350Cm
  • SG90 Rotational Degree: 180
  • Jumper Wire Compatible with 2.54mm spacing pin headers
  • Jumper Wire Durable and reusable
Package Includes:
  • 1 x Ultrasonic Sensor HC-SR04
  • 1 x TowerPro SG90 Servo Motor with Cable
  • 1 x Set of Horns
  • 1 x Set of Screws
  • 1 x 10Pcs Male to Female Jumper Wire

W1209 Digital Temperature Controller Thermostat Sensor

189.00
PRODUCT OVERVIEW:
  • Temperature Control Range(°C): -50 to +110
  • Resolution @-9.9°C to +99.9°C: 0.1°C
  • Resolution @all temperatures: 1°C
  • Accuracy: 0.1°C
  • Refresh Rate(s): 0.5
  • Supply Voltage(V): 12
  • Measuring Inputs: NTC10K
  • Cable Length: 0.5 Meter
  • Output Type: 1 Channel Relay Output
  • Capacity: 10A
Package Includes: 1 x W1209 digital temperature controller switch with Temperature sensor and display

XH-W3001 AC 220V 1500W Digital Display Temperature Controller

349.00
PRODUCT OVERVIEW:
  • Output type: AC Output (AC 220V 1500W).
  • Output capacity: MAX temperature measurement, display; refrigeration, heating control
  • Temperature setting upper and lower limits
  • Simple operation, suitable for seafood machines.
  • Upper key: The start temperature is displayed in one press, and a long press to set the start temperature.
  • Lower key: The stop temperature is displayed in one press, and long press to set stop temperature.
  • Control Accuracy: Upto 0.1℃.
Package Includes: 1 x w3001 temperature controller