Automatic Hand Sanitizer Machine IR Sensor, DC Water Pump, Relay Module
Original price was: ₹499.00.₹199.00Current price is: ₹199.00.
Specifications:
- Product Name: Automatic Hand Sanitizer Machine
- Type: DIY Hand Sanitizer Dispenser Kit
- Power Supply: Compatible with 5V charger, power bank, or USB
- IR Sensor Detection Range: Up to 10 cm (approximate)
- Water Pump Voltage: DC 5V
- Relay Module Type: 1 Channel Relay Module
- Operating Temperature: 0°C to 60°C
- Sensor Type: IR Sensor
- Dimensions:Â 48 x 14 x 8 mm
- Weight: 80 g
Package Includes:
1 x DC Water Pump
1 x 1 Channel Relay
1 x IR Sensor
1 x Pipe
3 x Cable Tie
Stay safe with the Automatic Hand Sanitizer Machine, which keeps hygiene contactless. With this DIY hand sanitizer dispenser kit from Vayuyaan, you can easily build your device at home. It has an advanced IR sensor that automatically detects when your hand is near and activates the DC water pump. This makes it super convenient, as the pump dispenses sanitizer right when needed, ensuring a clean and hassle-free experience with this automatic hand sanitizer machine. Check out our DC Water Pump Ultimate Guide for Beginners to learn everything you need to know in simple steps!
The hand sanitizer machine kit includes all the essential components to build your project. The IR sensor works, allowing you to use it without touching anything. When the IR sensor senses your hand, it sends a signal to the 1 channel relay module. This signal turns on the pump, which then releases the sanitizer. This process helps maintain hygiene and saves sanitizer, making it a smart choice for homes, offices, and public places with this automatic hand sanitizer machine.
Thanks to the clear circuit diagram in the kit, assembling the automatic hand sanitizer project is simple. You can power the device with a 5V charger, power bank, or USB, giving you multiple options. Whether you’re new to DIY electronics or have some experience, this kit is easy to set up and works well.
The Automatic Hand Sanitizer Machine is a simple yet effective way to boost hygiene anywhere. Its automatic dispenser helps lower the risk of germs spreading, making it perfect for regular use. Moreover, the kit has everything you need, including an IR sensor, DC water pump, and relay module, to easily set up your own automatic sanitizer dispenser. In short, it’s a complete solution for anyone looking to make their own touch-free sanitizer system.
| Weight | 0.1 kg |
|---|---|
| Dimensions | 10 × 8 × 4 cm |
You must be logged in to post a review.
Q: What is an Automatic Hand Sanitizer Machine?
A: An Automatic Hand Sanitizer Machine is a touch-free, sensor-based dispenser that automatically dispenses hand sanitizer when a user places their hand underneath the dispenser.
Q: What components are included in this Automatic Hand Sanitizer Machine?
A: This Automatic Hand Sanitizer Machine comes with an IR sensor, water pump, and relay module.
Q: How does the IR sensor work in this Automatic Hand Sanitizer Machine?
A: The IR sensor detects the presence of a user's hand underneath the dispenser and triggers the water pump to dispense the hand sanitizer.
Q: What type of hand sanitizer is compatible with this Automatic Hand Sanitizer Machine?
A: This Automatic Hand Sanitizer Machine is compatible with liquid hand sanitizers that have a viscosity similar to water.
Q: What is the capacity of this Automatic Hand Sanitizer Machine?
A: The capacity of this Automatic Hand Sanitizer Machine is dependent on the size of the container that is used to hold the hand sanitizer.
Q: How is this Automatic Hand Sanitizer Machine powered?
A: This Automatic Hand Sanitizer Machine can be powered using a DC power supply.
Q: Is this Automatic Hand Sanitizer Machine easy to install?
A: Yes, this Automatic Hand Sanitizer Machine is easy to install and can be set up in a matter of minutes.
Q: Does this Automatic Hand Sanitizer Machine require any maintenance?
A: This Automatic Hand Sanitizer Machine may require occasional maintenance, such as refilling the hand sanitizer container or cleaning the dispenser.
Q: Is this Automatic Hand Sanitizer Machine suitable for use in public spaces?
A: Yes, this Automatic Hand Sanitizer Machine is ideal for use in public spaces where touch-free dispensing of hand sanitizer is necessary.
Q: What are the dimensions of this Automatic Hand Sanitizer Machine?
A: The dimensions of this Automatic Hand Sanitizer Machine may vary depending on the specific components used and the size of the container, but typically it is compact and designed to be mounted on a wall or stand.
You may also like…
DC Water Pump – Micro DC 3-6V Submersible Mini Water Pump
Specifications:
- Operating Voltage: 2.5 ~ 6V
- Operating Current: 130~220mA
- Flow Rate: 80-120 liters per hour (L/H)
- Maximum Lift: 40-110 centimeters (cm)
- Outlet Outside Diameter: 7.5 mm
- Outlet Inside Diameter: 5 mm
- Noise Level: ≤40 decibels (dB)
- Cable Length: 1 meter
- Dimensions: 45 x 24 x 30 mm
- Weight: 30g
Package Includes:
1 x DC 3-6 V Mini Micro Submersible DC Water Pump
IR Sensor Module – Infrared Obstacle Avoidance Sensor
Specifications:
- Model: IR Sensor Module
- Type: Infrared Obstacle Avoidance Sensor
- Operating Voltage: 3.6 - 5V DC
- Detection Range: Adjustable, up to 20-30cm
- Detection Angle: 35 °
- Output Type: Digital Signal (0 or 1)
- Response Time: < 2ms
- Operating Temperature: -10°C to +50°C
- Compatibility: Arduino, Raspberry Pi, and other microcontrollers
- Key Features: Adjustable sensitivity, easy to integrate, low power consumption
- Applications: Robotics, automation, industrial equipment, proximity sensing
- Dimensions: 48 x 14 x 8 mm
- Weight: 5g
Package Includes:
1 x IR Sensor Module - Infrared Obstacle Avoidance Sensor
Jumper Wires M-M, M-F, F-F, 20cm, 120 Pieces
Specifications:
- Pin Count: 40
- Connector Type: Dupont Wire
- Color: Multicolor for easy identification
- Wire Length: 20 cm
- Diameter: 0.1cm
- Pins: Standard 0.1-inch (2.54mm) spacing
- Flexibility: Flexible and durable
- Quantity: 120 pieces
- Weight: 100g
Package Includes:
40 x Male to Male Jumper Wire set 40 x Male to Female Jumper Wire set 40 x Female to Female Jumper Wire setRelated products
1602 LCD Display with I2C/IIC Serial Interface Adapter Module
Specifications:
- Display Type: Alphanumeric
- Display Size: 16 characters x 2 lines
- Interface: I2C
- Compatibility: Arduino, Raspberry Pi, ESP8266
- Dimensions: (L x W x H) 80mm x 36mm x 12mm
- Weight: 20g
- Operating Voltage: 5V
- Backlight: Yellow
Package Includes:
1 x LCD 16x2 1602 Alphanumeric Display Yellow 1 x I2C Module Adapter
Arduino Kit BO Motor with Wheel and Arduino Uno R3 with Jumper Wires
Specifications:
Specifications of BO Motor:
- Motor Type:Â DC
- Operating Voltage:Â 3 ~ 12 VDC
- Shaft Type:Â Dual Shaft
- Shaft Length:Â 8.5 mm
- Shaft Diameter:Â 5.5 mm
- Speed:Â 100 RPM
- Dimensions (LxWxH):Â 64 x 22 x 18 mm
- Weight:Â 30 g
Specifications of BO Wheel:
- Wheel Diameter:Â 65mm
- Wheel Width:Â 27mm
- D-hole For BO Motor:Â 6mm
- Compatible with:Â BO Motor
- Color:Â Black (Tyre), Yellow (Rim)
- Weight:Â 34g
Specifications of Arduino Uno:
- Microcontroller:Â ATmega328P
- Operating Voltage:Â 5V
- Input Voltage (recommended):Â 7-12V
- Digital I/O Pins:Â 14 (of which 6 provide PWM output)
- Analog Input Pins:Â 6
- SRAM:Â 2 KB
- EEPROM:Â 1 KB (ATmega328P)
- Clock Speed:Â 16 MHz
- Dimensions:Â 75 x 54 x 12 mm (L x W x H)
- Weight:Â 28 g (without cable), 54 g (with cable)
Specifications of Jumper Wires:
- Wire Type:Â Male-to-male, male-to-female, female-to-female
- Color:Â Assorted colors for easy identification
- Wire Length: 20 cm
- Diameter:Â 0.1cm
- Pins: Standard 0.1-inch (2.54mm) spacing
- Quantity:Â 60 pieces
- Weight:Â 50g
Package Includes:
1 x Arduino Uno R3 Development Board 1 x USB Cable 4 x BO Motor 4 x BO Wheel 20 x Male to Male jumper wires 20 x Male to Female jumper wires 20 x Female to Female jumper wires
Arduino Uno R3 with L293D Motor Driver
PRODUCT OVERVIEW:-
- Experience the power of Arduino Uno R3 combined with L293D motor driver shield for seamless motor control.
- Microcontroller ATmega328P With Operating Voltage : 5V
- Benefit from the ATmega328P microcontroller's abundant memory for program and data storage.
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Precisely control motors with the L293D shield's two H-bridge output channels.
- Optimize performance with a dual power supply configuration for both Arduino Uno R3 and motors.
- Explore a wide range of applications, including robotics, home automation, and motor-driven projects.
- Rely on the proven reliability and robustness of this widely used combination trusted by hobbyists, enthusiasts, and professionals.
- Expand project possibilities with compatibility with various sensors, actuators, and components.
Package Includes:
- 1 x Arduino Uno R3 with Cable
- 1 x L293D Motor Driver Shield
DIY Kit BO Motor and Wheel with SG90 Motor & Ultrasonic Sensor
Specifications:
Specifications of BO Motor:
- Motor Type: DC
- Operating Voltage: 3 ~ 12 VDC
- Shaft Type: Dual Shaft
- Shaft Length: 8.5 mm
- Shaft Diameter: 5.5 mm
- Speed: 100 RPM
- Dimensions (LxWxH): 64 x 22 x 18 mm
- Weight: 30 g
Specifications of BO Wheel:
- Wheel Diameter: 65mm
- Wheel Width: 27mm
- D-hole For BO Motor: 6mm
- Compatible with: BO Motor
- Color: Black (Tyre), Yellow (Rim)
- Weight: 34g
Specifications of Ultrasonic Sensor:
- Operating Voltage: 5V DC
- Measuring Range: 2cm – 400cm
- Measuring Angle: 30 degrees
- Operating Frequency: 40kHz
- Accuracy: ±3mm
- Interface: 4 pins (VCC, Trig, Echo, GND)
- Dimensions: 45 x 20 x 15 mm
- Weight: 10g
Specifications of SG90 Servo Motor:
- Model: TowerPro SG90
- Operating Voltage: 4.8V to 6V
- Torque Rating: 1.2 to 1.6 kg-cm
- Rotation: 180 Degree
- Gear Type: Plastic
- Dimensions: 22.8 x 12.6 x 34.5 mm
- Weight: 9g
Package Includes:
4 x BO Motor 4 x BO Wheel 1 x HC-SR04 Ultrasonic Sensor 1 x Towerpro SG90 Mini Servo Motor
DIY Project Kit BO Motor with Wheel and Arduino UNO R3
Specifications:
Specifications of BO Motor:
- Motor Type:Â DC
- Operating Voltage:Â 3 ~ 12 VDC
- Shaft Type:Â Dual Shaft
- Shaft Length:Â 8.5 mm
- Shaft Diameter:Â 5.5 mm
- Speed:Â 100 RPM
- Dimensions (LxWxH):Â 64 x 22 x 18 mm
- Weight:Â 30 g
Specifications of BO Wheel:
- Wheel Diameter:Â 65mm
- Wheel Width:Â 27mm
- D-hole For BO Motor:Â 6mm
- Compatible with:Â BO Motor
- Color:Â Black (Tyre), Yellow (Rim)
- Weight:Â 34g
Specifications of Arduino Uno:
- Microcontroller:Â ATmega328P
- Operating Voltage:Â 5V
- Input Voltage (recommended):Â 7-12V
- Digital I/O Pins:Â 14 (of which 6 provide PWM output)
- Analog Input Pins:Â 6
- SRAM:Â 2 KB
- EEPROM:Â 1 KB (ATmega328P)
- Clock Speed:Â 16 MHz
- Dimensions:Â 75 x 54 x 12 mm (L x W x H)
- Weight:Â 28 g (without cable), 54 g (with cable)
Package Includes:
4 x BO Motor 4 x BO Wheel 1 x Arduino Uno R3 Development Board 1 x USB Cable
LDR Sensor LM393 Photosensitive Light Dependent Sensor
Specifications:
- Model: LM393 Light Dependent Resistor (LDR) Sensor
- Operating Voltage: 3.3V - 5V
- Output Type: Digital (0 or 1)
- Detection Range: Adjustable
- Sensitivity: High
- Operating Temperature: -40°C to 85°C
- Dimensions: 19mm x 15mm x 6mm
- Weight: 2g
- Interface: Analog/Digital
- Compatibility: Arduino, Raspberry Pi, and other microcontrollers
Package Includes:
1 x LDR Sensor LM393 Light Dependent Resistor Sensor
Ultrasonic Sensor with SG90 Motor and 10 pcs M-F Jumper Wire
Specifications:
Specifications of Ultrasonic Sensor:
- Operating Voltage: 5V DC
- Measuring Range: 2cm – 400cm
- Measuring Angle: 30 degrees
- Operating Frequency: 40kHz
- Accuracy: ±3mm
- Interface: 4 pins (VCC, Trig, Echo, GND)
- Dimensions: 45 x 20 x 15 mm
- Weight: 10g
Specifications of SG90 Servo Motor (TowerPro):
- Model:Â TowerPro SG90
- Operating Voltage: 4.8V to 6V
- Torque Rating:Â 1.2 to 1.6 kg-cm
- Stall Torque @ 4.8V:Â 1.2 Kg-Cm
- Stall Torque @6.6V:Â 1.6 Kg-Cm
- Rotation:Â 180 Degree
- Gear Type: Plastic
- Dimensions:Â 22.8 x 12.6 x 34.5 mm
- Weight:Â 9g
Specifications of Jumper Wires (Male to Female):
- Connector Type: Male to Female
- Length: 20 cm each
- Pin Count: 10
- Color: Assorted colors for easy identification
- Pins: Standard 0.1-inch (2.54mm) spacing
- Dimensions: Each wire – Length: 20cm, Diameter: 0.1cm
- Weight:Â 40g
Package Includes:
1 x Ultrasonic Sensor HC-SR04 1 x TowerPro SG90 Servo Motor with Cable 1 x Set of Horns 1 x Set of Screws 10 x Male to Female Jumper Wires
Ultrasonic Sensor with SG90 Servo Motor
Specifications:
- Product Name: Ultrasonic Sensor with SG90 Servo Motor
- Sensor Type: Ultrasonic Distance Sensor
- Servo Motor Model: TowerPro SG90
- Servo Motor Rotation: 180 degrees
- Input Voltage for Ultrasonic Sensor: 5V
- Input Voltage for SG90 Servo Motor: 4.8V to 6V
- Operating Range of Ultrasonic Sensor: 2 cm to 400 cm
- Output Signal: Analog and Digital
- Dimensions of Ultrasonic Sensor: 45 x 20 x 15 mm
- Dimensions of Weight:Â 10g
- Dimensions of SG90 Servo Motor:Â 22.8 x 12.6 x 34.5 mm
- Weight of SG90 Servo Motor: Â 9 g
Reviews
There are no reviews yet.