High-quality wheels for coupling with BO type of DC motors. This wheel can be coupled to BO-type motors by coupling it. You can make your own robot by using these the same, it will balance your bot as it has better grip and provides incredible motion.
Vayuyaan offers customers an excellent quality range of 300 RPM BO-1 Series Motors. Low-cost high-performance DC geared motor with a wide operating voltage range of 3~12 volts DC and good output torque capability.
Dual Shaft BO Motor Plastic Gear Motor – BO series straight motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. A small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & lightweight makes it suitable for in-circuit placement. This motor comes with a 66mm Diameter wheel for Plastic Gear Motors and an 87mm Diameter Multipurpose Wheel for Plastic Gear Motors. Low-cost geared DC Motor. It is an alternative to our metal gear DC motor. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots. Available with 60 and 150 RPM. The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car.
- Double shaft BO motor with wheel
- Operating Voltage 3V – 12V DC
- RPM Approximately 300 RPM
- No-load current 40 – 80 mA
- Output Torque 3.5 kg-cm
FEATURES OF THIS BO WHEEL
- The car hub is reinforced nylon, very sturdy.
- A tire with sponge liner for more strength
- With upgraded tire tread for greater friction
- New design wheel for better combination with the motor
Click To Read More
APPLICATIONS OF BO WHEELS
- BO Wheels are used for making robots and robotic vehicles.
- These Wheels can be easily coupled with BO motors.
- Wheel’s wider grip allows vehicle or robot to be stable on high terrain or smooth surface as well.
- The big size and Yellow-Black color combination give an attractive look to your robot or robotic vehicle.
Vayuyaan believes in satisfied customers, so whatever the product is we first import them then test them for their supplier-defined and standard capabilities. Only after doing all the possible quality checks, we make the product available to our customers.
BO WHEELS KIT SPECIFICATIONS
Loading Capacity (Kg) : 2.5
D hole For BO Motor: 6 mm Weight (gm) : 34 Wheel Diameter(mm) : 65 mm Color: Black (Tyre), Yellow (Rim) Wheel Width: 27 mm Body Material: Plastic Grip Material: Rubber Center Shaft Hole Diameter: 5.4 mm (round side) and 3.5 mm-(flat side) Shipment Weight : 0.125 kg Shipment Dimensions : 7 x 7 x 4 cm |
About Ultrasonic Sensor HC-SR04
This HC-SR04 Ultrasonic Range Finder is a very popular sensor that is found in many applications where it requires measuring distance and detecting objects.
The module has two eyes like projects in the front which forms the Ultrasonic transmitter and Receiver. The HC-SR04 Ultrasonic Sensor uses sonar to determine the distance to an object like bats or dolphins do.
This Ultrasonic Sensor module is a transmitter, a receiver, and a control circuit in one single pack!! It has very handy and compact construction. It offers excellent range accuracy and stable readings in an easy-to-use package. Its operation is not affected by sunlight or black material like Sharp rangefinders are (although acoustically soft materials like cloth can be difficult to detect).
The Trigger and the Echo pins are the I/O pins of this module and hence they can be connected to the I/O pins of the microcontroller/Arduino. When the receiver detects the return wave the Echo pin goes high for a particular amount of time which will be equal to the time taken for the wave to return back to the sensor.
Ultrasonic Distance Sensor provides very short (2CM) to long-range (4M) detection and ranging. The sensor provides precise and stable non-contact distance measurements from about 2cm to 4 meters with very high accuracy. It can be easily interfaced with any microcontroller.
The module sends eight 40Khz square wave pulses and automatically detects whether it receives the returning signal. If there is a signal returning, a high-level pulse is sent on the echo pin. The length of this pulse is the time it took the signal from first triggering to the return echo.
Vayuyaan believes in satisfied customers, so whatever the product is, we first import them then test them for their supplier-defined and standard capabilities. Only after doing all the possible quality checks, we make the product available to our customers.
HC-SR04 Ultrasonic Sensor Wiring:
- +5V(positive)
- Trig(control)
- Echo (receive)
- GND (negative)
Features:
- Measures the distance within a wide range of 2cm to 400cm
- Stable performance
- Accurate distance measurement
- High-density
- Small blind distance
HC-SR04 Ultrasonic Sensor Applications:
- Used to avoid and detect obstacles with robots like biped robots, obstacle avoider robots, path-finding robots, etc.
- Used to measure the distance within a wide range of 2cm to 400cm
- Can be used to map the objects surrounding the sensor by rotating it
- Depth of certain places like wells, pits, etc can be measured since the waves can penetrate through the water
About TowerPro SG90 Micro Servo Motor
TowerPro SG90 Servo Motor is lightweight, high-quality, and lightning-fast. The servo is designed to work with almost all radio control systems. It is with excellent performance and high torque of 1.5 kg-cm gives you the freedom to use it for a variety of projects. The SG90 micro servo motor with accessories is perfect for RC helicopter, plane, car, boat, and truck use.
It equips Carbon Fiber Gears which makes the SG90 servo motor much lighter than the same metal gear motor. For small load applications using the metal gear, the servo motor adds on unnecessary weight, so we suggest using these lightweight plastic gear servo motors.
The TowerPro SG90 Micro Servo Motor is a 180° rotation servo. It is a Digital Servo Motor that receives and processes PWM signals faster and better. It equips sophisticated internal circuitry that provides good torque, holding power, and faster updates in response to external forces.
Wire Description
- RED – Positive
- Brown – Negative
- Orange – Signal
Features:
- High resolution
- Accurate positioning
- Fast control response
- Constant torque throughout the servo travel range
- Excellent holding power
Read Less
Reviews
There are no reviews yet.