0.96 Inch OLED Display Module 4 Pin I2C IIC Interface for Arduino
Specifications:
- Display Size: 0.96 Inch
- Display Type: OLED
- Interface: I2C IIC
- Pin Configuration: 4 Pins
- Compatibility: Arduino and other microcontrollers
- Communication: I2C for easy integration
- Resolution: High resolution for clear images
- Dimensions: 27mm (L) x 27mm (W) x 4.2mm (H)
- Weight: 15g
Package Includes:
1 x 0.96 Inch OLED Display Module1000KV BLDC Motor A2212 With Soldered Bullet Connector
Specifications:
- Model: A2212
- KV Rating: 1000KV
- Type: Brushless
- Connector: Soldered Bullet Connector
- Weight: 47g
- Shaft Diameter: 3.17mm
- Motor Dimensions: 27.5 x 27mm
- Recommended Voltage: 11.1V
- Maximum Continuous Current: 13A
- Maximum Continuous Power: 143W
- Maximum Efficiency Current: 4-10A (75%)
- Internal Resistance: 0.105 ohms
- Recommended Propeller Size: 8-10 inches
- Wire Length: 150mm
Package Includes:
- 1 x 1000Kv Brushless Motor for Drone
- 1 x Prop Adapter
- A Motor Holder (X-type) and a set of screws
1000KV Motor with 30A ESC and 1045 Propeller Set For RC Plane
PRODUCT OVERVIEW:
- The steel design is capable of withstanding competitional conditions.
- Lightweight design makes them suitable for a wide range of Quad-copters and Hexacopter Frames.
- Compact size.
- Offers great performance and value for money.
- Smooth throttle response for best RC experience.
- ESC used has an On-Board BEC.
- Faster and Better speed control.
Package Includes:
- 1 x A2212 10T 13T 1000KV Brushless Motor for Drone with Soldered Connector
- 4 x Prop Adapter
- Motor Holder (X-type) and set of screws
- 1 x ESC 30A BLDC ESC
- 2 x 1045(10×4.5) SF Propellers (1CW, 1CCW).
- 2 x Sets of prop reducers.
1045/1045R 10 inch Propeller Pair (CW+CCW), Black
1045/1045R 10 inch Propeller Pair (CW+CCW), Black (Set of 2)
1045/1045R 10 inch Propeller Pair (CW+CCW), Black (Set of 5)
12706 Thermoelectric Peltier Cooler Module
12v DC Fan 3010 Fan Cooling Brushless Mini Fan For 3D Printer
1400KV BLDC Motor With Soldered Bullet Connector
Specifications:
- Model: A2212
- KV: 1400
- Motor Type: Brushless DC (BLDC)
- Connector: Soldered Bullet Connector
- Operating Voltage: 7.4V - 11.1V
- Maximum Current: 12A
- Maximum Power: 132W
- Motor Dimensions: 27.5mm x 27mm
- Shaft Diameter: 3.17mm
- Weight: 47g
- Application: Drone, RC Car, DIY Projects
Package Includes :
- 1 x A2212 1400Kv Brushless Motor for Drone
- 1 x Prop Adapter
- A Motor Holder (X-type) and a set of screws
1400KV Brushless Motor With Soldered Bullet Connector (Set of 4)
Specifications:
- Model: A2212
- KV: 1400
- Motor Type: Brushless DC (BLDC)
- Number of Motors: 4
- Connector Type: Soldered bullet connectors
- Compatible With: Quadcopters, hexacopters, octocopters
- Recommended Propeller Size: 8 to 10 inches
- Weight: Approximately 50g per motor
- Dimensions: 27.5mm x 27mm x 27mm
- Operating Voltage: 7.4V to 11.1V
- Maximum Continuous Current: 12A
- Maximum Continuous Power: 120W
- Shaft Diameter: 3.17mm
- Shaft Length: 12mm
- Mounting Hole Spacing: 16mm x 19mm
- Motor Wire Length: Approximately 150mm
Package Includes:
- 1 x A2212 1400Kv Brushless Motor for Drone
- 1 x Prop Adapter
- A Motor Holder (X-type) and a set of screws
1602 LCD Board Keypad Shield with Blue Backlight
Specifications:
- Display: 16x2 LCD display
- Backlight: Blue backlight
- Input: Keypad for user input
- Compatibility: Compatible with Arduino Uno, Mega, Leonardo, and other compatible boards
- Mounting: Easy to mount on Arduino board
Package Includes:
1 x LCD Display 1602 Board Keypad Shield with Blue Backlight1602 LCD Display with I2C/IIC Serial Interface Adapter Module
Specifications:
- Display Type: Alphanumeric
- Display Size: 16 characters x 2 lines
- Interface: I2C
- Compatibility: Arduino, Raspberry Pi, ESP8266
- Dimensions: (L x W x H) 80mm x 36mm x 12mm
- Weight: 20g
- Operating Voltage: 5V
- Backlight: Yellow
Package Includes:
1 x LCD 16x2 1602 Alphanumeric Display Yellow 1 x I2C Module Adapter16×2 Character LCD Display With Yellow Backlight
Specifications:
- Display Type: 16x2 Character LCD
- Backlight Color: Yellow
- Operating Voltage: 5V
- Interface: Parallel
- Controller: HD44780 Compatible
- Compatibility: Arduino Boards
- Operating Temperature: -20°C to 70°C
- Storage Temperature: -30°C to 80°C
- Dimensions: 80mm x 36mm x 12mm
- Weight: 30g
Package Includes:
1 x 16x2 Character LCD Display With Yellow Backlight16×2 LCD Display with I2C Module IIC Serial Interface Adapter
Specifications:
- Display Size: 16 characters x 2 lines
- Display Type: LCD (Liquid Crystal Display)
- Interface: I2C (Inter-Integrated Circuit)
- I2C Address: 0x27
- Backlight: Blue
- Operating Voltage: 5V
- Dimensions (L x W x H): 80mm x 36mm x 12mm
- Weight: 30g
- Compatible with Arduino, Raspberry Pi, and other microcontrollers
- Easy to use and integrate into projects
- Ideal for displaying text, numbers, and symbols
- Includes I2C module for simplified interfacing
Package Includes:
1 x LCD 16×2 1602 Alphanumeric Display Blue 1 x I2C Module2.4 inch TFT LCD Display Shield for Arduino Uno
Specifications:
- Display Type: 2.4" diagonal Touch LCD TFT
- Resolution: 240×320 pixels
- Color Depth: 18-bit (262,000 colors)
- Voltage Compatibility: 5V compatible, use with 3.3V or 5V logic
- MicroSD Card Slot: Included for additional storage options
- Compatibility: Works with Arduino Uno and Mega-compatible boards
Package Includes:
1 x 2.4 inch TFT LCD Display Shield for Arduino UNO Mega, 1 x Stylus Pen2000W SCR High-Power Voltage Regulator Speed Controller
Specifications:
- Power Output: 2000W
- Voltage Range: 0-220V AC
- Control Type: SCR (Silicon Controlled Rectifier)
- Input Voltage: 220V AC
- Output Voltage: Adjustable
- Dimensions: 85mm x 55mm x 38mm (L x W x H)
- Weight: 41g
- Material: High-quality components for durability
- Technology: Thyristor Power Controller
- Compatibility: Compatible with various electronic components
Package Includes:
1 x 2000W SCR High-Power Voltage Regulator Speed Controller28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver
Specifications:
- Stepper Motor Model: 28BYJ-48
- Stepper Motor Driver Model: ULN2003
- Voltage: 5V DC
- Step Angle: 5.625°/64
- Reduction Ratio: 1/64
- Diameter: 28mm
- Voltage: 5V
- Phase: 4
- Current: 0.1A
- Resistance: 50Ω
- Motor Length: 34mm
- Weight: 30g
Package Includes:
1 x 28BYJ-48 Stepper Motor 1 x ULN2003 Stepper Motor Driver Module30A ESC – Electronic Speed Controller With Dean Connector
30A ESC Electronic Speed Controller With Dean Connector
Specifications:
- Voltage Range: 7.4V - 14.8V
- Continuous Current: 30A
- BEC Output: 5V/2A
- Input Connector: Dean Connector
- Output Connector: 3.5mm bullet connectors
- Dimensions: 45mm x 25mm x 10mm
- Weight: 25g (including wires)
- Compatibility: Suitable for RC cars, boats, drones, and other vehicles
- Color: Yellow casing for easy identification
- Quantity: Set of 4 ESCs
Package Includes:
4 x ESC 30A Simonk Electronic Speed Controller with Connectors.30A ESC Simonk Electronic Speed controller with Connector (Set of 4)
30A ESC Simonk Electronic speed controller with Dean Connector
3dBi Magnetic Mount Antenna for GSM FCT Device (10 Feet Long)
40 Pin Dupont Female to Female Jumper Wire, 40 Pieces
40 Pin Dupont Male to Female Jumper Wire, 40 Pieces
PRODUCT OVERVIEW:
- 40 P color DuPont line
- Weight: 45 gm
- Compatible with 2.54mm spacing pin headers
- 40 pcs chromatic male to female color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
40 Pin Dupont Male to Male Jumper Wire, 40 Pieces
PRODUCT OVERVIEW:
- 40P color DuPont line
- Weight: 45 gm
- Compatible with 2.54mm spacing pin headers
- 40pcs chromatic male to male color jumper wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
400 Point Breadboard Half Size Solderless Breadboard
Specifications:
- 400-point breadboard for prototyping circuits
- Half-size design for portability and convenience
- No soldering is required for easy circuit assembly
- Compatible with a wide range of electronic components
- Durable construction for long-lasting performance
- Ideal for hobbyists, students, and professionals
Package Includes:
1 x 400 Point Breadboard Half Size Solderless Breadboard4000W SCR 220V Voltage Regulator Dimming Speed Regulation
Specifications:
- Power Rating: 4000W
- Input Voltage: 220V AC
- Control Type: SCR (Silicon Controlled Rectifier)
- Control Mode: Phase Control
- Dimensions: 58mm x 85mm x 40mm (L x W x H)
- Weight: 122g
- Working Voltage: AC 220V
- Frequency Range: 50Hz ~ 60Hz
Package Includes:
1 x 4000W SCR 220V Voltage Regulator4×4 Matrix Keypad Membrane Switch for Arduino and other MCU
Specifications:
- Keypad Layout: 4x4 matrix (16 keys)
- Key Material: Silicone rubber
- Operating Voltage: 3-5V DC
- Interface: 8-pin female header
- Connection: Jumper wire compatible
- Compatibility: Arduino, other MCU projects
- Operating Temperature: -20°C to 70°C
- Storage Temperature: -40°C to 85°C
- Key Life: 1 million cycles
- Dimensions: 77mm x 69mm x 1mm
- Weight: 15g
Package Includes:
1x Matrix Keypad 4x4 Membrane Switch Keypad Module58mm Bluetooth Thermal Printer – High-Quality Printer for Receipts
Specifications:
- Model: 58mm Bluetooth Thermal Printer
- Paper Width: 58mm
- Connectivity: Bluetooth and USB
- Print Speed: Up to 90mm/s
- Compatibility: Compatible with Android, iOS, and Windows devices
- Power Source: DC 12V/2A
- Product Dimensions: 17 x 11 x 8 cm
- Weight: 900 g
- Supported Languages: English, Spanish, French, German, Italian, Chinese, Japanese
- Warranty: 1 year
Package Includes:
- 1 x 58mm Bluetooth Thermal Printer
- 1 x USB Cable
- 1 x Power Cable
- 1 x CD Drive
- 1 x User Manual
58mm Thermal Receipt Printer
PRODUCT OVERVIEW:-
- The 58mm thermal receipt printer support cash drawer driving.
- Quality printing low noise and high-speed printing.
- Quick and easy paper change with low maintenance cost.
- Easy install - the USB POS printer is simple and convenient to operate.
- Compatible ESC/POS print commands, support bitmap, and download graphics printing.
Package Includes:
- 1 x 58mm Thermal Printer
- 1 x USB Cable
- 1 x Power Cable
- 1 x CD Drive
- 1 x User Manual
58mm Thermal Receipt Printer (Black)
PRODUCT OVERVIEW:-
- The 58mm thermal receipt printer support cash drawer driving.
- Quality printing low noise and high-speed printing.
- Quick and easy paper change with low maintenance cost.
- Easy install - the USB POS printer is simple and convenient to operate.
- Compatible ESC/POS print commands, support bitmap, and download graphics printing.
Package Includes:
- 1 x 58mm Thermal Printer
- 1 x USB Cable
- 1 x Power Cable
- 1 x CD Drive
- 1 x User Manual
5V 2 Channel Relay Module with Optocoupler for Arduino
5V 4 Channel Relay Control Board Module
Specifications:
- Voltage Compatibility: 5V
- Number of Channels: 4
- Driver Current per Channel: 15-20mA
- Relay Type: High-current, AC250V 10A; DC30V 10A
- Interface Compatibility: Arduino, 8051, AVR, PIC, DSP, ARM, MSP430, TTL logic
- LED Indicators: Included for relay output status
Package Includes:
1 x 5V 4 Channel Relay Board Module5V Single Channel Relay Module for Arduino | One Channel Relay
65mm BO Wheels, Robot Wheel For BO Motors
PRODUCT OVERVIEW
- A tire with sponge liner for more strength
- With upgraded tire tread for greater friction
- New design wheel for better combination with the motor
- Diameter: 65 mm
- The material of Wheel: High-strength plastic
- The material of Tyre: Rubber
- Color: Yellow
8 Channel Relay Board 5V Expansion Module with Optocoupler
Specifications:
- Product Name: 8 Channel Relay Board
- Voltage Compatibility: 5V (DC)
- Relay Type: Electromagnetic Relay
- Operating Temperature: -40°C to +85°C
- Input Voltage: 5V DC (Operating)
- Input Voltage Range: 3.3V to 12V DC
- Trigger Input Voltage: 0V (Low-Level Trigger) to VCC (High-Level Trigger)
Package Includes:
1 x 8 Channel Relay ModuleA2212 1000KV BLDC Motor With Soldered Bullet Connector (Set of 4)
PRODUCT OVERVIEW
- Motor KV: 1000
- Current Capacity: 12A/60S
- LiPO Batteries: 2S-3S
- Efficiency Current: 4-10A
- Shaft Diameter: 3.17 mm
- Prop Adapter is quality tested before shipping to customers.
- 4 x A2212 1000Kv Brushless Motor for Drone
- 4 x Prop Adapter
- A Motor Holder (X-type) and set of screws
A4988 Stepper Motor Driver with Heatsink
Specifications:
- Model: A4988 Stepper Motor Driver with Heatsink
- Compatible with: Arduino Uno
- Operating Voltage: 8V to 35V
- Output Current: Up to 2A per phase (with adequate cooling)
- Microstepping: Full, half, quarter, eighth, and sixteenth-step modes
- Built-in Heatsink: Yes
- Connector Type: 4-pin header for motor connection, 2-pin header for power supply
- Additional Features: Thermal shutdown circuitry, cross-current protection
- Dimensions: 20mm x 15mm x 11mm
- Weight: 5 grams
Package Includes:
1 x A4988 Stepper Motor Driver with HeatsinkArduino D1 Mini V2 Mini NodeMCU Development Board
Specifications:
- Microcontroller: ESP8266
- Operating Voltage: 3.3V
- Digital I/O Pins: 11
- Analog Input Pins: 1 (3.2V max input)
- Flash Memory: 4 MB
- Clock Speed: 80 MHz
- WiFi: 802.11 b/g/n
- Dimensions: 34.2mm x 25.6mm
- Lua scripting support
Package Includes:
1 x Arduino D1 Mini V2 Mini NodeMCU Development BoardArduino Nano Soldered V3 Board Compatible with Arduino
Specifications:
- Compatibility: Compatible with Arduino Nano V3
- Pins: Pre-soldered for easy connection
- Microcontroller: ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limit): 6-20V
- Flash Memory: 32KB (ATmega328), of which 2KB used by the bootloader
- SRAM: 2KB (ATmega328)
- EEPROM: 1KB (ATmega328)
- Clock Speed: 16MHz
- Dimensions: 18.5 x 43.2 mm
- Weight: 7g
Package Includes:
1 x Arduino Nano V3 Soldered ATMEGA328 Compatible BoardArduino Nano V3 Soldered Board with USB Cable
Specifications:
- Microcontroller: ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limit): 6-20V
- Digital I/O Pins: 14 (6 of which are PWM)
- Analog Input Pins: 8
- Flash Memory: 32 KB (2 KB used by bootloader)
- SRAM: 2 KB
- EEPROM: 1 KB
- Clock Speed: 16 MHz
- Dimensions: 1.85 cm x 4.32 cm
- Weight: Approximately 7g
Package Includes:
1 x Nano Soldered V3 Board 1 x USB CableArduino UNO R3 & Ultrasonic Sensor With SG90 Motor and Jumper Wires
PRODUCT OVERVIEW
- Ultrasonic Operating Voltage(VDC): 3.2 – 5.2
- SG90 Operating Voltage: 3.0 – 7.2V
- Ultrasonic weight (gm): 10
- SG90 weight (gm): 9
- Ultrasonic Measurement Range: 3cm to 350Cm
- SG90 Rotational Degree: 180
- Jumper Wire Compatible with 2.54mm spacing pin headers
- Jumper Wire Durable and reusable
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 1 x Ultrasonic Sensor HC-SR04
- 1 x TowerPro SG90 Servo Motor with Cable
- 1 x SG90 Set of Horns
- 1 x SG90 Set of Screws
- 1 x 40 pcs Male to Male jumper wire set
- 1 x 40 pcs Male to Female jumper wire set
- 1 x 40 pcs Female to Female jumper wire set
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
Arduino Uno R3 Development Board ATmega328P with USB Cable
Arduino Uno R3 with Jumper Wires 120 Pcs
PRODUCT OVERVIEW
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 40P color DuPont line
- Length: 300mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 120 pcs chromatic color jump wire
- High quality and in good working condition
- Durable and reusable
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
- 1 x 40 pcs Male to Male jumper wire set
- 1 x 40 pcs Male to Female jumper wire set
- 1 x 40 pcs Female to Female jumper wire set
Arduino Uno R3 With Jumper Wires 60 Pieces
Product Overview:
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 40P color DuPont line
- Length: 300mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 120 pcs chromatic color jump wire
- High quality and in good working condition
- Durable and reusable
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
- 1 x 20 pcs Male to Male jumper wire set
- 1 x 20 pcs Male to Female jumper wire set
- 1 x 20 pcs Female to Female jumper wire set
Arduino Uno R3 with L293D Motor Driver
PRODUCT OVERVIEW:-
- Experience the power of Arduino Uno R3 combined with L293D motor driver shield for seamless motor control.
- Microcontroller ATmega328P With Operating Voltage : 5V
- Benefit from the ATmega328P microcontroller's abundant memory for program and data storage.
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Precisely control motors with the L293D shield's two H-bridge output channels.
- Optimize performance with a dual power supply configuration for both Arduino Uno R3 and motors.
- Explore a wide range of applications, including robotics, home automation, and motor-driven projects.
- Rely on the proven reliability and robustness of this widely used combination trusted by hobbyists, enthusiasts, and professionals.
- Expand project possibilities with compatibility with various sensors, actuators, and components.
Package Includes:
- 1 x Arduino Uno R3 with Cable
- 1 x L293D Motor Driver Shield
Arduino Uno SMD Development Microcontroller Board With Cable
Specifications:
- Microcontroller: ATmega328P SMD
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- Flash Memory: 32 KB (ATmega328P), of which the bootloader uses 0.5 KB
- SRAM: 2 KB (ATmega328P)
- EEPROM: 1 KB (ATmega328P)
- Clock Speed: 16 MHz
- Length: 68.6 mm
- Width: 53.4 mm
- Weight: 25 g
- USB Interface: CH340G
- Compatible with the Arduino Uno platform
Package Includes:
1 x Arduino Uno R3 Development Microcontroller Board SMD Version 1 x USB CableAutomatic Hand Sanitizer Machine IR Sensor, Water Pump, Relay Module
Battery Tester 1-8S Lipo Battery Voltage Tester
Specifications:
- Compatibility: 1-8S lipo batteries
- Voltage Measurement Range: 3.7V-30V
- Voltage Display Resolution: 0.01V
- Voltage Display Accuracy: ±0.03V
- Operating Temperature: -10°C to 50°C
- Display: LED screen
- Dimensions: 40mm x 25mm x 10mm
- Weight: 10g
- Features: Overvoltage and undervoltage alarm, low voltage alarm, reverse polarity protection
Package Includes:
1 x Battery Tester 1-8S Lipo Battery Voltage TesterBO Motor 12V DC Dual Shaft 100 RPM Motor – Straight
Specifications:
- Motor Type: DC
- Operating Voltage: 3 ~ 12 VDC
- No Load Current: 40-180mA
- Shaft Type: Dual Shaft
- Shaft Length: 8.5 mm
- Shaft Diameter: 5.5 mm
- Speed: 100 RPM
- Rated Torque: 1Kg-Cm
- Application: Robotics, Automation
- Dimensions (LxWxH): 64 x 22 x 18 mm
- Weight: 30 g
Package Includes:
1 x BO Motor 12V DC Dual Shaft 100 RPM Motor - StraightBO Motor, BO Wheel & Arduino UNO R3 with Jumper Wires 60 Pcs
Product Overview:
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 40P color DuPont line
- Length: 300mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 60 pcs chromatic color jumper wire
- High quality and in good working condition
- Durable and reusable
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
- 1 x 20 pcs Male to Male jumper wire set
- 1 x 20 pcs Male to Female jumper wire set
- 1 x 20 pcs Female to Female jumper wire set
- 4 x BO Motor
- 4 x BO Wheel
Chess Clock by LEAP Master Tournament
Specifications:
- Product Type: Digital Chess Clock
- Display: Large LCD screen for clear time display
- Accuracy: High precision timing to ensure fairness in competitive play
- Material: Durable plastic designed to withstand frequent use and travel
- Weight: Lightweight design for easy transportation
- User-Friendly: Simple setup process for players of all skill levels
Package Includes:
1 x LEAP Master Tournament Digital Chess ClockCrocodile Clips Double Ended Cable Alligator Clips 10 Pieces
Specifications:
- Quantity: 10 pieces
- Material: Metal clips with wire leads
- Clip Length: 5 cm (2 inches)
- Wire Length: 45 cm (18 inches)
- Compatibility: Compatible with Arduino Uno R3, breadboards, and other electronic components
- Usage: Ideal for connecting wires, breadboards, and components in electronic projects
- Features: Double-ended design for easy and secure connections
- Application: Suitable for hobbyists, students, and professionals working on DIY projects or experiments
- Weight: 82 g
Package Includes:
10 x Crocodile Clips Double Ended Cable Alligator ClipsDC 3.7-6V To 400KV Boost Step Up Power Module
DC Dual Shaft BO Gear Motor & Wheel With SG90 Servo Motor
PRODUCT OVERVIEW
- Operating Voltage 3V - 12V DC
- RPM Approximately 150 RPM
- No load current 40 - 80 mA
- Output Torque 3.5 kgf.cm
- High quality plastic wheel and BO-series motor
- Plastic Wheels with a slot that matches BO Motor Shaft are made to work with BO motors both Series I and II.
- 66mm diameter, 20mm width
- Operating Voltage: 5 V
- Sonar Sensing Range: 2-400 cm
- Max. Sensing Range: 450 cm
- Frequency: 40 kHz
- Operating voltage: 3.0V~ 7.2V
- Stall torque @4.8V : 1.2kg-cm
- Stall torque @6.6V: 1.6kg-
- 4 x BO Motor
- 4 x BO Wheel
- 1 x HC-SR04 Ultrasonic Sensor
- 1 x Towerpro SG90 Mini Servo Motor
DC Dual Shaft BO Motor & Wheel with SG90 Motor and Ultrasonic Sensor
PRODUCT OVERVIEW
- Operating Voltage 3V - 12V DC
- RPM Approximately 150 RPM
- No load current 40 - 80 mA
- Output Torque 3.5 kgf.cm
- High quality plastic wheel and BO-series motor
- Plastic Wheels with a slot that matches BO Motor Shaft are made to work with BO motors both Series I and II.
- 66mm diameter, 20mm width
- Operating Voltage: 5 V
- Sonar Sensing Range: 2-400 cm
- Max. Sensing Range: 450 cm
- Frequency: 40 kHz
- Operating voltage: 3.0V~ 7.2V
- Stall torque @4.8V : 1.2kg-cm
- Stall torque @6.6V: 1.6kg-
- 4 x BO Motor
- 4 x BO Wheel
- 1 x HC-SR04 Ultrasonic Sensor
- 1 x Towerpro SG90 Mini Servo Motor
DC Water Pump – Micro DC 3-6V Submersible Mini Water Pump
PRODUCT OVERVIEW
- Mini pump, delicate and light, very perfect for an experiment, aquarium, fish tank, and fountain, etc.
- DC 3v to 6v submersible pump
- Micro mini submersible water pump 3v to 6v
- DC water pump for DIY
- DC pumps for the HOBBY kit.
Digital Kitchen Timer – Baseus Heyo Rotation Countdown Timer Kitchen Timer
Specifications:
- Product Type: Digital Kitchen Timer
- Functionality: Multi-use with alarm clock, countdown, and stopwatch features
- Display: Clear, easy-to-read digital screen
- Timing Capacity: Ranges from 1 second to 99 minutes and 59 seconds
- Material: Durable, high-quality plastic for long-lasting use
Package Includes:
1 x Digital Kitchen Timer Baseus Heyo Rotation Countdown Timer 1 x User ManualDigital Timer Clock by Taylor – Perfect Timing for Every Task
Specifications:
- Brand: Taylor
- Product Type: Digital Timer Clock
- Versatility: Suitable for cooking, studying, workouts, and more
- Accuracy: Ensures precise timing for all your activities
- Additional Features: Includes a countdown and count-up feature
- Colour: Sleek design to fit any decor style
- Interface: User-friendly with simple button controls
Package Includes:
1 x Taylor Dual Event Digital TimerDigital Timer Switch Programmable Timer Switch for Lights and Appliances – Quick Sense Digital Timer
Specifications:
- Type: Programmable Din Type Digital Timer Controller
- Voltage Compatibility: 16/240V AC, suitable for a wide range of household appliances
- Programmable Settings: Offers both daily and weekly programming options for flexible scheduling
- Switch Type: Relay Switch, ensuring reliable operation for lights and appliances
- Application: Suitable for controlling lighting, fans, and other electronic devices, enhancing home automation and energy efficiency
Package Includes:
1 x Quick Sense 16/240V AC Programmable Din Type Digital Timer ControllerDigital Voltmeter Ammeter DC 0-100V 10A Dual LED Monitor Panel
Drone Kit Universal Tall Landing Gear Skid for DJI F450 F550 Sk480 Multirotor Quadcopter – Black
DS3231 RTC Module Precise Real Time Clock I2C AT24C32
Specifications:
- Chip: DS3231
- Interface: I2C
- Accuracy: ±2ppm from 0°C to +40°C
- Operating Voltage: 2.7 ~ 5.5
- Temperature Range: -40°C to +85°C
- Battery Backup: CR2032 coin cell battery
- Time: HH: MM: SS (12/24 hr)
- Date Format: YY-MM-DD-dd
- Compatibility: Arduino Uno, NodeMCU ESP8266 ESP32, STM32F103C8T6 board
- Dimensions: 38mm x 22mm x 14mm
- Weight: 8g
Package Includes:
1 x DS3231 RTC ModuleDual Shaft BO Motor & Wheel (Set of 4) & Arduino UNO R3
PRODUCT OVERVIEW
- Operating Voltage 3V - 12V DC
- RPM Approximately 150 RPM
- No-load current 40 - 80 mA
- Output Torque 3.5 kg-cm
- High-quality plastic wheel and BO-series motor
- Plastic Wheels with a slot that matches BO Motor Shaft are made to work with BO motors in both Series I and II.
- 66mm diameter, 20mm width
- Operating Voltage: 5 V
- Sonar Sensing Range: 2-400 cm
- Max. Sensing Range: 450 cm
- Frequency: 40 kHz
- Operating voltage: 3.0V~ 7.2V
- Stall torque @4.8V : 1.2kg-cm
- Stall torque @6.6V: 1.6kg
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 4 x BO Motor
- 4 x BO Wheel
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
Dual Shaft BO Motor With BO Wheel (Yellow)
PRODUCT OVERVIEW
- Kit Contains:Double shaft bo motor with wheel
- Operating Voltage 3V - 12V DC
- RPM Approximately 150 RPM
- No load current 40 - 80 mA
- Output Torque 3.5 kgf.cm
- High quality plastic wheel and BO-series motor
- Plastic Wheels with a slot that matches BO Motor Shaft are made to work with BO motors both Series I and II.
- 66mm diameter, 20mm width
- 1 x BO Motor
- 1 x BO Wheel
ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module
Specifications:
- Model: ESP-01
- Chip: ESP8266
- Wireless Standard: 802.11 b/g/n
- Operating Voltage: 3.3V
- Operating Current: Average 80mA
- Operating Temperature: -40°C to +125°C
- Storage Temperature: -40°C to +125°C
- Flash Memory: 1MB
- Firmware: Supports AT commands
- Compatibility: Arduino IDE
- Dimensions: 24.8mm x 14.3mm x 3mm
- Weight: 2g
Package Includes:
1 x ESP-01 ESP8266 Serial WIFI Wireless Transceiver ModuleF450 Drone Frame with Integrated PCB – 4 Axis Design
Specifications:
- Frame Type: Quadcopter Frame
- Model: F450
- Number of Axes: 4
- Material: High-quality, durable materials
- Integrated PCB: Yes
- Assembly Required: Yes
- Compatibility: Compatible with a wide range of quadcopter components
- Arm Size: 220 x 40 (LxW) mm
- Arm mounting holes (on frame): 3 mm
- Arm mounting holes (on arm): 2 mm
- Weight: 340 g
- Color: Red & White
Package Includes:
1 x F450 Quadcopter Frame (Top and Bottom) with Integrated PCB 4 x F450 arms (2 Red + 2 White) 1 x Accessories set. (24 X M2.5 X 5mm)FlySky CT6B 2.4GHz 6 Channel Transmitter and Receiver
Specifications:
- Model: FlySky CT6B
- Frequency: 2.4GHz
- Channels: 6
- Compatibility: Ideal for use with drones, RC cars, boats, and planes
- Receiver: FS-R6B included
- Signal Strength: Strong and reliable signal, even in crowded environments
- Ergonomic Design: Comfortable to hold, reducing fatigue during extended use
- Controls: Intuitive layout for easy navigation and adjustment
- Value for Money: Affordable option compared to other rc controllers on the market
- Ideal for: Enthusiasts of all levels
- Warranty: Standard manufacturer's warranty applies
Package Includes:
1 x FS-CT6B Transmitter 1 x FS-r6B Receiver 1 x USB Interface Cable 1 x Software CD 1 x Receiver Binding Cable 1 x User ManualFlySky FS-i6 2.4G 6CH RC Transmitter with Receiver FS-iA6B
Specifications:
- Model: FlySky FS-i6
- Channels: 6
- Frequency: 2.4GHz
- Receiver: FS-iA6B
- Control Range: Over 500 meters
- Power Supply: 4 x AA batteries (not included)
- Compatibility: RC cars, drones, and other devices
- Dimensions: (Transmitter) 174 x 89 x 190mm; (Receiver) 47 x 26.2 x 15mm
- Weight: (Transmitter) 392g; (Receiver) 6.4g
Package Includes:
1x FlySky FS-i6 2.4G 6CH PPM RC Transmitter 1x FS-iA6B Receiver 1x User ManualFrontier TM619H2 Digital Timer Programmable Time Switch
PRODUCT OVERVIEW:-
- 17 on or off programs can be set per day
- Easy-to-replace battery
- Option to select specific days or days of the week for programmed functions to be performed
- LED power indicator
- Manual override switch
- LCD on-screen displays on and off switching status
- The lithium battery inside for memory backup
- Daily, weekly, and impulse programs
- Time switch with LCD display 4-pin
- Easy connection settings.
Package Includes:
- 1 x Frontier Digital Programmable Timer
- 1 x Instruction Manual
GE MyTouchsmart Indoor Plug-In Digital Timer Switch
Specifications:
- Type: Indoor Plug-In Digital Timer Switch
- Compatibility: Works with lamps, seasonal lighting, small appliances, and more
- Programming: Customizable on/off timer schedules for daily routines
- Installation: Easy plug-and-play setup with no wiring required
- Display: Digital interface for straightforward programming
- Countdown Feature: Includes options for countdown timing for added convenience
Package Includes:
1 x MyTouchSmart Indoor Plug-In Digital Timer SwitchGL-12 840 Points Solderless Breadboard
Specifications:
- Model: GL-12
- Points: 840
- Type: Solderless Breadboard
- Material: ABS plastic
- Dimensions: 16.5cm x 5.5cm x 0.85cm
- Weight: 30g
- Color: White
- Compatibility: Electronic Components, PCB Boards
- Construction: Durable
- Features: Adhesive Backing
- Use: Prototyping, Circuit Testing
- Suitability: Hobbyists, Students, Professionals
- Additional: Easy to Transport, User-Friendly Design
Package Includes:
1 x GL-12 840 Points Solderless BreadboardHC-05 Bluetooth Module 6pin with Button
Specifications:
- Model: HC-05 Bluetooth Module
- Operating Voltage: 3.3V
- Communication Protocol: Bluetooth 2.0
- Range: Up to 10 meters
- Interface: UART
- Pin Configuration: 6-pin design with button
- Compatibility: Arduino Uno and other microcontroller boards
- Dimensions: 28mm x 15mm x 2.35mm
- Weight: 5 grams
Package Includes:
1 x HC-05 Bluetooth Module 6pin with ButtonHX711 Weight Sensor 24 Bit A/D Precision Pressure Sensor
Specifications:
- Model: HX711 Weight Sensor 24 Bit A/D Precision Pressure Sensor
- Compatibility: Arduino Nano
- A/D Converter: 24-bit
- Technology: Strain gauge
- Usage: Weight measurement, pressure sensing
- Compatibility: Compatible with various weight cells
- Precision: High precision for accurate readings
- Ease of Use: Easy to integrate and operate
- Application: Suitable for hobbyist and professional projects
- Dimensions: Compact size for easy installation
Package Includes:
1 x HX711 Weight Sensor 24 Bit A/D Precision Pressure SensorIIC/I2C Serial Interface Adapter Module for LCD1602 Display
Specifications:
- Interface: I2C/IIC
- Display: LCD1602 (16x2 characters)
- Operating Voltage: 5V
- Operating Temperature: -20°C to 70°C
- Input Voltage: 5V DC
- PCB Size (L x W) mm: 42 x 20
- Weight: 4g
- Compatibility: Arduino, Raspberry Pi, and other microcontrollers
Package Includes:
1 x IIC/I2C Serial Interface Adapter Module for LCD1602 DisplayIMAX B3 Lipo Battery Balance Charger for 2S-3S LiPo
Specifications:
- Input Voltage: AC 100-240V, 50/60Hz
- Output Current: 3x 800mA
- Charging Power: 20W
- Compatible Battery Types: 2S-3S LiPo batteries
- Balance Ports: 3
- Dimensions: 90mm x 55mm x 35mm
- Weight: 180g
- Safety Features: Reverse polarity protection, overcharge protection
- Cooling System: Built-in cooling fan
- Certifications: CE, RoHS
Package Includes:
1 x IMAX B3 LiPo Battery Balance Charger 1 x Power Cord 1 x User ManualIR Sensor Module – Infrared Obstacle Avoidance Sensor
Specifications:
- Model: IR Sensor Module
- Type: Infrared Obstacle Avoidance Sensor
- Operating Voltage: 3.3V - 5V
- Detection Range: Adjustable, up to 20-30cm
- Detection Angle: Approximately 35 degrees
- Output Type: Digital Signal (0 or 1)
- Response Time: < 2ms
- Operating Temperature: -10°C to +50°C
- Dimensions: 3.2cm x 1.4cm x 0.5cm
- Compatibility: Compatible with Arduino, Raspberry Pi, and other microcontrollers
- Key Features: Adjustable sensitivity, easy to integrate, low power consumption
- Applications: Robotics, automation, industrial equipment, proximity sensing
Package Includes:
1 x IR Sensor ModuleJumper Wires M-M, M-F, F-F, 20cm, 120 Pieces
PRODUCT OVERVIEW
- 40P color DuPont line
- Length: 300mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 120 pcs chromatic color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
- 1 x 40 pcs Male to Male jumper wire set
- 1 x 40 pcs Male to Female jumper wire set
- 1 x 40 pcs Female to Female jumper wire set
Jumper Wires M-M, M-F, F-F, 20cm, 60 Pieces
Specifications:
- Quantity: 60 pieces
- Length: 20cm each
- Wire Type: Male-to-male, male-to-female, female-to-female
- Compatibility: Suitable for use with breadboards and Arduino
- Material: High-quality copper core with PVC insulation
- Color: Assorted colors for easy identification
- Application: Ideal for electronics prototyping, DIY projects, and circuit design
- Flexibility: Flexible and durable wires for easy handling
- 1 x 20pcs Male to Male Jumper Wire set
- 1 x 20pcs Male to Female Jumper Wire set
- 1 x 20pcs Female to Female Jumper Wire set
L293D Motor Driver Shield Or Servo Shield For Arduino
L298N Motor Driver Module with PWM Control
PRODUCT OVERVIEW
- Driver chip: L298 dual H-bridge driver chip.
- Operates up to 35V DC.
- Drive part of the peak current Io: 2A / Bridge.
- The logical part of the terminal power supply range Vss:4.5V-5.5V
- The logical part of the operating current range: 0 ~ 36mA.
- Maximum power consumption: 20W.
- Current Sense for each motor.
- Heatsink for better performance.
- Power-On LED indicator.
- Drives up to 4 motors.
LDR Sensor LM393 Photosensitive Light Dependent Sensor
Specifications:
- Model: LM393 Light Dependent Resistor (LDR) Sensor
- Operating Voltage: 3.3V - 5V
- Output Type: Digital (0 or 1)
- Detection Range: Adjustable
- Sensitivity: High
- Operating Temperature: -40°C to 85°C
- Dimensions: 19mm x 15mm x 6mm
- Weight: 2g
- Interface: Analog/Digital
- Compatibility: Arduino, Raspberry Pi, and other microcontrollers
Package Includes:
1 x LDR Sensor LM393 Light Dependent Resistor SensorLeyden Smart Digital Electronic Programmable Switch Timer
Specifications:
- Model: Leyden Smart Digital Electronic Programmable Switch
- Type: Digital Timer Switch
- Voltage: 230Volts
- Easy Setup: User-friendly interface for simple installation
- Programmable: Set multiple timer settings for different devices.
- Convenient: Say goodbye to manual switching with this electronic timer
Package Includes:
1 x Leyden Smart Digital Electronic Programmable SwitchLM2596 DC-DC Buck Converter Step Down Power Supply Module
Specifications:
- Input Voltage: 4V-35V
- Output Voltage: 1.23V-30V
- Output Current: 2A (3A with heatsink)
- Conversion Efficiency: Up to 92%
- Switching Frequency: 150 kHz
- Operating Temperature: -40°C to +85°C
- Dimensions: 43mm x 21mm x 14mm
- Weight: 11g
Package Includes:
1 x LM2596 DC-DC Buck Converter Step Down Power Supply ModuleMAX7219 Dot Matrix LED Display Module for Arduino Uno
Specifications:
- Model: MAX7219 Dot Matrix LED Display Module
- Input Voltage: 5V
- LED Display: Supports dot matrix displays and 7-segment digital displays
- Control Interface: Serial interface
- Compatibility: Arduino, ARM, Raspberry Pi, and other microcontrollers
- Cascadable: Can be cascaded to control multiple displays
- Maximum Display Size: 8x8 for dot matrix displays
- Dimensions: 5.4cm x 3.2cm x 1.5cm
- Weight: 10g
Package Includes:
1 x MAX7219 Dot Matrix LED Display ModuleMB102 830 Points Breadboard with 65Pcs Jumper Wires
Specifications:
- Breadboard Model: MB102
- Total Points: 830
- Jumper Wires Included: 65 pieces
- Jumper Wire Lengths: Various lengths for flexible connections
- Jumper Wire Colors: Assorted colors for easy organization
- Compatibility: Suitable for use with a wide range of electronic components
- Material: High-quality plastic for durability
- Dimensions: Compact size for easy storage and transport
- Usage: Ideal for prototyping and testing electronic circuits without soldering
Package Includes:
- 1 x MB102 830 Points Solderless Prototype PCB Breadboard
- 1 x 65 Male to Male Jumper Wires
MG996R Servo Motor High Torque Servo Motor (360° Rotation)
Specifications:
- Model: MG996R
- Operating Voltage: 4.8 - 6.6V
- Stall Torque: 9.4kg/cm (4.8V), 11kg/cm (6V)
- Operating Speed: 0.17sec/60° (4.8V), 0.14sec/60° (6V)
- Gear Type: Metal
- Rotation: 360°
- Dimensions: 40.7 x 19.7 x 42.9mm
- Weight: 55g
- Connector Wire Length: 300mm
- Operating Temperature: -30°C to +60°C
- Compatibility: Most microcontrollers
- Control System: Pulse Width Modulation (PWM)
Package Includes:
1 x TowerPro MG996R Digital High Torque Servo MotorMicro USB Cable USB-2.0 Mini B Cable for Arduino Nano
Specifications:
- Cable Type: Micro USB
- Connector Type: USB-2.0 Mini B
- Length: 20 cm
- Compatibility: Arduino Nano and other devices with USB-2.0 Mini B ports
- Features: Plug-and-Play, Durable Construction, High-Speed Data Transfer
- Material: PVC
- Color: Blue
Package Includes:
1 x Micro USB Cable USB-2.0 Mini B Cable for Arduino Nano (20 cm)MP3 Player DFPlayer Mini MP3 Player Module for Arduino
Specifications:
- Module Type: MP3 Player Module
- Audio Formats Supported: MP3, WAV
- Bluetooth Compatibility: HC-05 Bluetooth Module
- Control Interface: Serial Control
- Features: Play, Pause, Skip Tracks, Adjust Volume
- Compatible with Arduino Uno
- Dimensions: 1.6 x 6.7 x 11 cm
- Weight: 10 g
Package Includes:
1 x DFPlayer Mini MP3 Player ModuleNano Board Unsoldered with USB Cable for Arduino
Specifications:
- Microcontroller: ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 14 (6 provide PWM output)
- Analog Input Pins: 8
- SRAM: 2 KB (ATmega328)
- EEPROM: 1 KB (ATmega328)
- Clock Speed: 16 MHz
- USB Chip: CH340G
- Dimensions: 45mm x 18mm
- Weight: 7g
Package Includes:
1 x Nano Board R3 CH340 Chip 1 x USB Mini CableNEO 6M GPS Module Geographic Positioning System with EPROM
Specifications:
- Product Name: NEO 6M GPS Module with EPROM
- Chipset: ublox NEO-6M
- Compatibility: Arduino, Raspberry Pi, and other microcontroller platforms
- Satellite Systems: GPS, GLONASS, BeiDou
- Memory: EPROM for configuration storage
- Interfaces: UART serial interface
- Operating Voltage: 3.3V - 5V
- Operating Current: 45mA
- Operating Temperature: -40°C to +85°C
- Antenna: Ceramic patch antenna with LNA
- Position Accuracy: 2.5m CEP (Circular Error Probable)
- Update Rate: Up to 5Hz
- Dimensions: 25mm x 35mm
- Weight: 50g
Package Includes:
1 x NEO-6M GPS Board 1 x Detachable AntennaNodeMCU ESP8266 CP2102 Board – IoT Development Board
NodeMCU ESP8266 D1 R2 WiFi UNO Based Development Board
Specifications:
- Microcontroller: ESP8266
- Operating Voltage: 3.3V
- Digital I/O Pins: 11
- Analog Input Pins: 1 (Max input: 3.2V)
- Clock Speed: 80MHz/160MHz
- Flash Memory: 4MB
- WiFi: 802.11 b/g/n
- USB-TTL Converter: CH340G
- Compatibility: Arduino IDE, NodeMCU, Lua, MicroPython
- Dimensions: 70mm x 54mm
- Weight: 30g
Package Includes:
1 x NodeMCU ESP8266 D1 R2 WiFi UNO Development BoardNodeMCU ESP8266 V3 Lua CH340 Wi-Fi Development Board
Specifications:
- NodeMCU ESP8266 V3 with CH340 chipset.
- Microcontroller: ESP8266
- USB-to-Serial Converter: CH340
- WiFi Connectivity: 802.11 b/g/n at 2.4GHz
- Security Protocols: Supports WPA/WPA2
- Operating Modes: STA/AP/STA+AP
- Programming: Supports programming via Lua script or Arduino IDE
- Flash Memory: 4MByte
Package Includes:
1 x NodeMCU ESP8266 V3 Lua CH340 WiFi Development BoardNRF24L01 Module – 2.4GHz Wireless Transceiver
PIR Sensor HC-SR501 Motion Detector Pyroelectric Infrared Module
Specifications:
- Model: PIR HC-SR501
- Operating Voltage: 4.5 ~ 20 VDC
- Current Consumption: 0.06 mA
- Detection Range: Up to 7 meters
- Detection Angle: <140°
- Output Signal: High (3.3V) when motion is detected, Low (0V) when no motion is detected
- Time Delay Adjustment: 5 to 200 seconds
- Trigger Mode: Repeatable (default) or Non-repeatable (jumper selectable)
- Compatibility: NodeMCU ESP8266, RTC Module, Ultrasonic Sensor
- Features: Passive Infrared Sensor, PIR detector, Low Power Consumption
- Applications: Security Systems, Lighting Controls, Motion-Activated Devices, Home Automation
- Dimensions: 32mm x 24mm x 25mm
- Weight: 10g
Package Includes:
1 x HC-SR501 PIR Sensor Motion Detector Pyroelectric Infrared ModulePWM Controller 1203B PWM DC Motor Speed Regulator
Specifications:
- Model: 1203B
- Input Voltage: DC 6V-28V
- Output Current: 3A (Max)
- PWM Duty Cycle: 0%-100%
- Control Method: Potentiometer
- Operating Temperature: -20°C to 40°C
- Dimensions: 6.8cm x 3.6cm x 2.2cm
- Weight: 40g
- Compatibility: PWM on Arduino
- Application: DC Motor Speed Control
Package Includes:
1 x 1203B PWM DC Motor Speed RegulatorRFID Sensor Module RC522 for Secure and Efficient Card Reading
Specifications of RFID Sensor RC522:
- Integrated MF RC522 chip for efficient RFID reading
- Operates at 13.56MHz for high-speed communication
- Low-voltage, cost-effective, compact design
- Non-contact card chip with up to 60mm reading distance
- Supports SPI protocol for easy CPU integration
- Ideal for smart meters, handheld devices, access control
- 1 x RFID-RC522 Reader/Writer Module
- 1 x Standard blank RFID card
- 1 x Straight header strip
- 1 x Right-angle header strip
- 1 x Special-shaped key-chain RFID tag
Servo Tester 3Ch Digital Multi Servo Tester ESC RC Consistency
Specifications:
- Channels: 3
- Input Voltage: 4.8-6.0V
- Operating Voltage: DC 4.8-6V
- Output Signal: 1.5ms±0.5ms
- Material: Plastic
- Size: 48mm x 42mm x 17mm
- Weight: 31g
- Compatible with: servo motors and electronic speed controllers (ESCs)
- Easy-to-use controls for adjusting settings
- Compact and lightweight design for portability
- Durable construction for long-lasting use
- Ideal for hobbyists and professionals alike
- Application: Ideal for testing and troubleshooting servo motors and ESCs in RC vehicles
Package Includes:
1 x Servo Tester 3Ch Digital Multi Servo Tester ESC RC ConsistencySIM800L GSM Module TTL Serial Port Micro SIM Card Core Board
Soil Moisture Sensor with Digital Output Soil Hygrometer
Solderless Breadboard MB102 830 Points PCB Breadboard
Specifications:
- Model: MB102
- Points: 830
- Construction: PCB board
- Features: Solderless breadboard, reusable
- Dimensions: Standard breadboard size
- Compatibility: Suitable for various electronic components
- Application: Ideal for prototyping and testing circuits
- Quality: High-quality construction for durability
- Ease of Use: No soldering is required
- Versatility: Suitable for beginners and professionals
- Portable: Compact size for easy transportation
- Brand: High-quality brand known for electronics products
Package Includes:
1 x MB102 830 Points Solderless Prototype PCB BreadboardStepper Motor 28BYJ-48 DC 5V Compatible with ULN2003 Driver
Specifications:
- Motor Model: 28BYJ-48
- Operating Voltage: DC 5V
- Driver Compatibility: ULN2003
- Control Signal: 4-phase
- Reduction Ratio: 1/64
- Step Angle: 5.625°/64
- Interface Type: 5-wire interface (included)
- Dimensions: 28mm × 28mm × 19mm
- Weight: 30g
- Cable Length: 25cm
Package Includes:
1 x 28BYJ-48 Stepper Motor 1 x 5-wire CableSTM32F103C8T6 Microcomputer STM32 Microcontroller Board
Specifications:
- Microcontroller: STM32F103C8T6 ARM Cortex-M3
- Operating Voltage: 3.3V
- Input Voltage: 7V - 12V
- Digital I/O Pins: 37
- Analog Input Pins: 10
- Flash Memory: 64KB
- SRAM: 20KB
- Clock Speed: Up to 72MHz
- Communication: UART, SPI, I2C
- Programming: Compatible with Arduino IDE
- Dimensions: 52mm x 22mm
Package Includes:
1 x STM32F103C8T6 Minimum System BoardTowerPro SG90 Micro Servo Motor – 180 degree Rotation
TowerPro SG90 Servo Motor with Ultrasonic Sensor
PRODUCT OVERVIEW
- Ultrasonic Operating Voltage(VDC): 3.2 – 5.2
- SG90 Operating Voltage: 3.0 – 7.2V
- Ultrasonic weight (gm): 10
- SG90 weight (gm): 9
- Ultrasonic Measurement Range: 3cm to 350Cm
- SG90 Rotational Degree: 180
- 1 x Ultrasonic Sensor HC-SR04
- 1 x TowerPro SG90 Servo Motor with Cable
- 1 x Set of Horns
- 1 x Set of Screws
ULN2003 Stepper Motor Driver Module
Specifications:
- Model: ULN2003 Stepper Motor Driver Module
- IC: ULN2003
- Operating Voltage: 5V - 12V
- Number of Channels: 4
- Compatible Stepper Motors: Bipolar and Unipolar
- Control Signal Input Voltage: 3.3V - 5V
- Maximum Drive Current: 500mA per channel
- Drive Method: Darlington Array
- Dimensions: 40mm x 40mm
- Mounting Holes Diameter: 3mm
- Weight: 10g
- Interface: 5-pin header for easy connection
- Operating Temperature: -20°C to +85°C
- Compatible with Arduino and other microcontrollers
Package Includes:
1 x ULN2003 Stepper Motor Driver ModuleUltrasonic Sensor HC-SR04 Module Distance Sensor
Specifications:
- Model: HC-SR04
- Operating Voltage: 5V DC
- Operating Current: <15mA
- Operating Frequency: 40kHz
- Measuring Range: 2cm - 400cm
- Accuracy: Up to 3mm
- Operating Temperature: -15°C to 70°C
- Storage Temperature: -20°C to 80°C
- Dimensions: 45mm x 20mm x 15mm
- Weight: 10g
Ultrasonic Sensor with SG90 Motor and 10 pcs M-F Jumper Wire
PRODUCT OVERVIEW
- Ultrasonic Operating Voltage(VDC): 3.2 – 5.2
- SG90 Operating Voltage: 3.0 – 7.2V
- Ultrasonic weight (gm): 10
- SG90 weight (gm): 9
- Ultrasonic Measurement Range: 3cm to 350Cm
- SG90 Rotational Degree: 180
- Jumper Wire Compatible with 2.54mm spacing pin headers
- Jumper Wire Durable and reusable
- 1 x Ultrasonic Sensor HC-SR04
- 1 x TowerPro SG90 Servo Motor with Cable
- 1 x Set of Horns
- 1 x Set of Screws
- 1 x 10Pcs Male to Female Jumper Wire
Universal Tall Landing Gear Skid for DJI F450 F550 SK480 – White
Unsoldered Nano V3.0 ATmega328P Compatible with Arduino
Specifications:
- Microcontroller: ATmega328P
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 8
- DC Current per I/O Pin: 40 mA
- Flash Memory: 32 KB (ATmega328P), of which the bootloader uses 0.5 KB
- SRAM: 2 KB (ATmega328P)
- EEPROM: 1 KB (ATmega328P)
- Clock Speed: 16 MHz
- Dimensions: 18.5mm x 43.2mm
- Weight: 5g
Package Includes:
1 x Arduino Nano Unsoldered V3 ATmega328P CH340 ChipUSB Cable for Arduino UNO and MEGA (USB A to B)
Specifications:
- Cable Type: USB A to B cable
- Length: 30cm
- Colour: Blue
- Weight: 25 gm
- Compatibility: Arduino Uno R3 and Arduino Mega
- Usage: Data transfer and power supply to Arduino boards
- Convenience: Micro USB design for easy connection and disconnection
- Material: High-quality, durable
- Certification: RoHS compliant
Package Includes:
1 x USB Cable for Arduino UNO and MEGA (USB A to B)W1209 Digital Temperature Controller Thermostat Sensor
PRODUCT OVERVIEW:
- Temperature Control Range(°C): -50 to +110
- Resolution @-9.9°C to +99.9°C: 0.1°C
- Resolution @all temperatures: 1°C
- Accuracy: 0.1°C
- Refresh Rate(s): 0.5
- Supply Voltage(V): 12
- Measuring Inputs: NTC10K
- Cable Length: 0.5 Meter
- Output Type: 1 Channel Relay Output
- Capacity: 10A
XH-W3001 AC 220V 1500W Digital Display Temperature Controller
PRODUCT OVERVIEW:
- Output type: AC Output (AC 220V 1500W).
- Output capacity: MAX temperature measurement, display; refrigeration, heating control
- Temperature setting upper and lower limits
- Simple operation, suitable for seafood machines.
- Upper key: The start temperature is displayed in one press, and a long press to set the start temperature.
- Lower key: The stop temperature is displayed in one press, and long press to set stop temperature.
- Control Accuracy: Upto 0.1℃.
XL6009 Boost Converter Module DC-DC Step-Up Converter
Specifications:
- Input Voltage Range: 3V to 32V
- Output Voltage Range: 5V to 35V
- Maximum Output Current: 4A
- Efficiency: Up to 94%
- Operating Frequency: 400kHz
- Operating Temperature Range: -40°C to +85°C
- Dimensions: 43mm x 20mm x 14mm (L x W x H)
- Weight: 7 grams
- Input Capacitor: 100uF (minimum)
- Output Capacitor: 470uF (minimum)
- Short Circuit Protection: Yes
- Over Temperature Protection: Yes
- Reverse Polarity Protection: Yes
- PCB Material: FR-4 Grade with 1.6mm thickness
- Mounting Holes: 3.5mm diameter, spaced 30mm apart (centre to centre)
Package Includes:
1 x XL6009 Boost Converter ModuleYF-S201 Water Flow Sensor with 1-30 Liter/min Flow Rate
Specifications:
- Model: YF-S201
- Flow Rate Range: 1-30 liters per minute
- Operating Voltage: 5V
- Output Signal: Pulse
- Working Temperature: 0-80°C
- Working Pressure: ≤1.75MPa
- Accuracy: ±3%
- Material: Plastic
- Connector Type: G1/2"
- Dimensions (LxWxH): 58 x 40 x 40 mm
- Weight: 85g