Continue shopping “XL6009 Boost Converter Module DC-DC Step-Up Converter” has been added to your cart.
Cart totals
| Subtotal | ₹1,196.00 |
|---|---|
| Shipping |
Shipping to Madhya Pradesh. |
| Total | ₹1,196.00 |
You may be interested in…
BO Motor, BO Wheel & Arduino UNO R3 with Jumper Wires 60 Pcs
Product Overview:
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 40P color DuPont line
- Length: 300mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 60 pcs chromatic color jumper wire
- High quality and in good working condition
- Durable and reusable
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
- 1 x 20 pcs Male to Male jumper wire set
- 1 x 20 pcs Male to Female jumper wire set
- 1 x 20 pcs Female to Female jumper wire set
- 4 x BO Motor
- 4 x BO Wheel
1400KV BLDC Motor With Soldered Bullet Connector
Specifications:
- Model: A2212
- KV: 1400
- Motor Type: Brushless DC (BLDC)
- Connector: Soldered Bullet Connector
- Operating Voltage: 7.4V - 11.1V
- Maximum Current: 12A
- Maximum Power: 132W
- Motor Dimensions: 27.5mm x 27mm
- Shaft Diameter: 3.17mm
- Weight: 47g
- Application: Drone, RC Car, DIY Projects
Package Includes :
- 1 x A2212 1400Kv Brushless Motor for Drone
- 1 x Prop Adapter
- A Motor Holder (X-type) and a set of screws
Servo Tester 3Ch Digital Multi Servo Tester ESC RC Consistency
Specifications:
- Channels: 3
- Input Voltage: 4.8-6.0V
- Operating Voltage: DC 4.8-6V
- Output Signal: 1.5ms±0.5ms
- Material: Plastic
- Size: 48mm x 42mm x 17mm
- Weight: 31g
- Compatible with: servo motors and electronic speed controllers (ESCs)
- Easy-to-use controls for adjusting settings
- Compact and lightweight design for portability
- Durable construction for long-lasting use
- Ideal for hobbyists and professionals alike
- Application: Ideal for testing and troubleshooting servo motors and ESCs in RC vehicles
Package Includes:
1 x Servo Tester 3Ch Digital Multi Servo Tester ESC RC Consistency
FlySky FS-i6 2.4G 6CH RC Transmitter with Receiver FS-iA6B
Specifications:
- Model: FlySky FS-i6
- Channels: 6
- Frequency: 2.4GHz
- Receiver: FS-iA6B
- Control Range: Over 500 meters
- Power Supply: 4 x AA batteries (not included)
- Compatibility: RC cars, drones, and other devices
- Dimensions: (Transmitter) 174 x 89 x 190mm; (Receiver) 47 x 26.2 x 15mm
- Weight: (Transmitter) 392g; (Receiver) 6.4g
Package Includes:
1x FlySky FS-i6 2.4G 6CH PPM RC Transmitter 1x FS-iA6B Receiver 1x User Manual
Arduino Uno R3 with Jumper Wires 60 Pieces
Product Overview:
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 40P color DuPont line
- Length: 300mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 120 pcs chromatic color jump wire
- High quality and in good working condition
- Durable and reusable
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
- 1 x 20 pcs Male to Male jumper wire set
- 1 x 20 pcs Male to Female jumper wire set
- 1 x 20 pcs Female to Female jumper wire set
28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver
Specifications:
- Stepper Motor Model: 28BYJ-48
- Stepper Motor Driver Model: ULN2003
- Voltage: 5V DC
- Step Angle: 5.625°/64
- Reduction Ratio: 1/64
- Diameter: 28mm
- Voltage: 5V
- Phase: 4
- Current: 0.1A
- Resistance: 50Ω
- Motor Length: 34mm
- Weight: 30g
Package Includes:
1 x 28BYJ-48 Stepper Motor 1 x ULN2003 Stepper Motor Driver Module
Arduino Uno SMD Development Microcontroller Board With Cable
Specifications:
- Microcontroller: ATmega328P SMD
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- Flash Memory: 32 KB (ATmega328P), of which the bootloader uses 0.5 KB
- SRAM: 2 KB (ATmega328P)
- EEPROM: 1 KB (ATmega328P)
- Clock Speed: 16 MHz
- Length: 68.6 mm
- Width: 53.4 mm
- Weight: 25 g
- USB Interface: CH340G
- Compatible with the Arduino Uno platform
Package Includes:
1 x Arduino Uno R3 Development Microcontroller Board SMD Version 1 x USB Cable
30A ESC Electronic Speed Controller With Dean Connector
Specifications:
- Voltage Range: 7.4V - 14.8V
- Continuous Current: 30A
- BEC Output: 5V/2A
- Input Connector: Dean Connector
- Output Connector: 3.5mm bullet connectors
- Dimensions: 45mm x 25mm x 10mm
- Weight: 25g (including wires)
- Compatibility: Suitable for RC cars, boats, drones, and other vehicles
- Color: Yellow casing for easy identification
- Quantity: Set of 4 ESCs
Package Includes:
4 x ESC 30A Simonk Electronic Speed Controller with Connectors.
Arduino Nano Soldered V3 Board Compatible with Arduino
Specifications:
- Compatibility: Compatible with Arduino Nano V3
- Pins: Pre-soldered for easy connection
- Microcontroller: ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limit): 6-20V
- Flash Memory: 32KB (ATmega328), of which 2KB used by the bootloader
- SRAM: 2KB (ATmega328)
- EEPROM: 1KB (ATmega328)
- Clock Speed: 16MHz
- Dimensions: 18.5 x 43.2 mm
- Weight: 7g
Package Includes:
1 x Arduino Nano V3 Soldered ATMEGA328 Compatible Board
BO Motor with BO Wheel and L293D Motor Driver Module
Specifications:
- Motor Type: BO Motor
- Quantity: 4 Motors
- Wheel Type: BO Wheel
- Motor Driver: L293D
- Ideal For: Robotics, DIY Projects
- Compatibility: Compatible with a wide range of projects
- Control: Speed and direction control for each motor
- Ease of Use: Easy to assemble and use
- Application: Suitable for RC cars, robots, and other motorized projects
Package Includes:
4 x DC BO Motors 4 x BO Wheels 1 x L293D Motor Driver
Arduino UNO R3 and Ultrasonic Sensor with SG90 Motor and Jumper Wires
Specifications:
- Ultrasonic Operating Voltage: 3.2 – 5.2 VDC
- SG90 Operating Voltage: 3.0 – 7.2V
- Ultrasonic sensor weight: 10 gm
- SG90 weight: 9 gm
- Ultrasonic Measurement Range: 3cm to 350 cm
- SG90 Rotational Degree: 180
- Jumper Wire Compatible with 2.54mm spacing pin headers
- Jumper Wire is Durable and reusable
- Microcontroller: ATmega328
- Arduino Uno Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
Package Includes:
- 1 x Ultrasonic Sensor HC-SR04
- 1 x TowerPro SG90 Servo Motor with Cable
- 1 x SG90 Set of Horns
- 1 x SG90 Set of Screws
- 1 x 40 pcs Male to Male jumper wire set
- 1 x 40 pcs Male to Female jumper wire set
- 1 x 40 pcs Female to Female jumper wire set
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
1400KV Brushless Motor With Soldered Bullet Connector (Set of 4)
Specifications:
- Model: A2212
- KV: 1400
- Motor Type: Brushless DC (BLDC)
- Number of Motors: 4
- Connector Type: Soldered bullet connectors
- Compatible With: Quadcopters, hexacopters, octocopters
- Recommended Propeller Size: 8 to 10 inches
- Weight: Approximately 50g per motor
- Dimensions: 27.5mm x 27mm x 27mm
- Operating Voltage: 7.4V to 11.1V
- Maximum Continuous Current: 12A
- Maximum Continuous Power: 120W
- Shaft Diameter: 3.17mm
- Shaft Length: 12mm
- Mounting Hole Spacing: 16mm x 19mm
- Motor Wire Length: Approximately 150mm
Package Includes:
- 1 x A2212 1400Kv Brushless Motor for Drone
- 1 x Prop Adapter
- A Motor Holder (X-type) and a set of screws
8 Channel Relay Board 5V Expansion Module with Optocoupler
Specifications:
- Product Name: 8 Channel Relay Board
- Voltage Compatibility: 5V (DC)
- Relay Type: Electromagnetic Relay
- Operating Temperature: -40°C to +85°C
- Input Voltage: 5V DC (Operating)
- Input Voltage Range: 3.3V to 12V DC
- Trigger Input Voltage: 0V (Low-Level Trigger) to VCC (High-Level Trigger)
Package Includes:
1 x 8 Channel Relay Module
FlySky CT6B 2.4GHz 6 Channel Transmitter and Receiver
Specifications:
- Model: FlySky CT6B
- Frequency: 2.4GHz
- Channels: 6
- Compatibility: Ideal for use with drones, RC cars, boats, and planes
- Receiver: FS-R6B included
- Signal Strength: Strong and reliable signal, even in crowded environments
- Ergonomic Design: Comfortable to hold, reducing fatigue during extended use
- Controls: Intuitive layout for easy navigation and adjustment
- Value for Money: Affordable option compared to other rc controllers on the market
- Ideal for: Enthusiasts of all levels
- Warranty: Standard manufacturer's warranty applies
Package Includes:
1 x FS-CT6B Transmitter 1 x FS-r6B Receiver 1 x USB Interface Cable 1 x Software CD 1 x Receiver Binding Cable 1 x User Manual
A2212 1000KV BLDC Motor With Soldered Bullet Connector (Set of 4)
PRODUCT OVERVIEW
- Motor KV: 1000
- Current Capacity: 12A/60S
- LiPO Batteries: 2S-3S
- Efficiency Current: 4-10A
- Shaft Diameter: 3.17 mm
- Prop Adapter is quality tested before shipping to customers.
- 4 x A2212 1000Kv Brushless Motor for Drone
- 4 x Prop Adapter
- A Motor Holder (X-type) and set of screws
1000KV BLDC Motor A2212 With Soldered Bullet Connector
Specifications:
- Model: A2212
- KV Rating: 1000KV
- Type: Brushless
- Connector: Soldered Bullet Connector
- Weight: 47g
- Shaft Diameter: 3.17mm
- Motor Dimensions: 27.5 x 27mm
- Recommended Voltage: 11.1V
- Maximum Continuous Current: 13A
- Maximum Continuous Power: 143W
- Maximum Efficiency Current: 4-10A (75%)
- Internal Resistance: 0.105 ohms
- Recommended Propeller Size: 8-10 inches
- Wire Length: 150mm
Package Includes:
- 1 x 1000Kv Brushless Motor for Drone
- 1 x Prop Adapter
- A Motor Holder (X-type) and a set of screws
Unsoldered Nano V3.0 ATmega328P Compatible with Arduino
Specifications:
- Microcontroller: ATmega328P
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 8
- DC Current per I/O Pin: 40 mA
- Flash Memory: 32 KB (ATmega328P), of which the bootloader uses 0.5 KB
- SRAM: 2 KB (ATmega328P)
- EEPROM: 1 KB (ATmega328P)
- Clock Speed: 16 MHz
- Dimensions: 18.5mm x 43.2mm
- Weight: 5g