Continue shopping “HC-05 Bluetooth Module 6pin with Button” has been added to your cart.
You may be interested in…
Dual Shaft BO Motor & Wheel (Set of 4) & Arduino UNO R3
PRODUCT OVERVIEW
- Operating Voltage 3V - 12V DC
- RPM Approximately 150 RPM
- No-load current 40 - 80 mA
- Output Torque 3.5 kg-cm
- High-quality plastic wheel and BO-series motor
- Plastic Wheels with a slot that matches BO Motor Shaft are made to work with BO motors in both Series I and II.
- 66mm diameter, 20mm width
- Operating Voltage: 5 V
- Sonar Sensing Range: 2-400 cm
- Max. Sensing Range: 450 cm
- Frequency: 40 kHz
- Operating voltage: 3.0V~ 7.2V
- Stall torque @4.8V : 1.2kg-cm
- Stall torque @6.6V: 1.6kg
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 4 x BO Motor
- 4 x BO Wheel
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
BO Motor with BO Wheel and L293D Motor Driver Module
Specifications:
- Motor Type: BO Motor
- Quantity: 4 Motors
- Wheel Type: BO Wheel
- Motor Driver: L293D
- Ideal For: Robotics, DIY Projects
- Compatibility: Compatible with a wide range of projects
- Control: Speed and direction control for each motor
- Ease of Use: Easy to assemble and use
- Application: Suitable for RC cars, robots, and other motorized projects
Package Includes:
4 x DC BO Motors 4 x BO Wheels 1 x L293D Motor Driver
Arduino Uno SMD Development Microcontroller Board With Cable
Specifications:
- Microcontroller: ATmega328P SMD
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- Flash Memory: 32 KB (ATmega328P), of which the bootloader uses 0.5 KB
- SRAM: 2 KB (ATmega328P)
- EEPROM: 1 KB (ATmega328P)
- Clock Speed: 16 MHz
- Length: 68.6 mm
- Width: 53.4 mm
- Weight: 25 g
- USB Interface: CH340G
- Compatible with the Arduino Uno platform
Package Includes:
1 x Arduino Uno R3 Development Microcontroller Board SMD Version 1 x USB Cable
Arduino Nano Soldered V3 Board Compatible with Arduino
Specifications:
- Compatibility: Compatible with Arduino Nano V3
- Pins: Pre-soldered for easy connection
- Microcontroller: ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limit): 6-20V
- Flash Memory: 32KB (ATmega328), of which 2KB used by the bootloader
- SRAM: 2KB (ATmega328)
- EEPROM: 1KB (ATmega328)
- Clock Speed: 16MHz
- Dimensions: 18.5 x 43.2 mm
- Weight: 7g
Package Includes:
1 x Arduino Nano V3 Soldered ATMEGA328 Compatible Board
Arduino Uno R3 with L293D Motor Driver
PRODUCT OVERVIEW:-
- Experience the power of Arduino Uno R3 combined with L293D motor driver shield for seamless motor control.
- Microcontroller ATmega328P With Operating Voltage : 5V
- Benefit from the ATmega328P microcontroller's abundant memory for program and data storage.
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Precisely control motors with the L293D shield's two H-bridge output channels.
- Optimize performance with a dual power supply configuration for both Arduino Uno R3 and motors.
- Explore a wide range of applications, including robotics, home automation, and motor-driven projects.
- Rely on the proven reliability and robustness of this widely used combination trusted by hobbyists, enthusiasts, and professionals.
- Expand project possibilities with compatibility with various sensors, actuators, and components.
Package Includes:
- 1 x Arduino Uno R3 with Cable
- 1 x L293D Motor Driver Shield
NodeMCU ESP8266 V3 Lua CH340 Wi-Fi Development Board
Specifications:
- NodeMCU ESP8266 V3 with CH340 chipset.
- Microcontroller: ESP8266
- USB-to-Serial Converter: CH340
- WiFi Connectivity: 802.11 b/g/n at 2.4GHz
- Security Protocols: Supports WPA/WPA2
- Operating Modes: STA/AP/STA+AP
- Programming: Supports programming via Lua script or Arduino IDE
- Flash Memory: 4MByte
Package Includes:
1 x NodeMCU ESP8266 V3 Lua CH340 WiFi Development Board
DC Dual Shaft BO Motor & Wheel with SG90 Motor and Ultrasonic Sensor
PRODUCT OVERVIEW
- Operating Voltage 3V - 12V DC
- RPM Approximately 150 RPM
- No load current 40 - 80 mA
- Output Torque 3.5 kgf.cm
- High quality plastic wheel and BO-series motor
- Plastic Wheels with a slot that matches BO Motor Shaft are made to work with BO motors both Series I and II.
- 66mm diameter, 20mm width
- Operating Voltage: 5 V
- Sonar Sensing Range: 2-400 cm
- Max. Sensing Range: 450 cm
- Frequency: 40 kHz
- Operating voltage: 3.0V~ 7.2V
- Stall torque @4.8V : 1.2kg-cm
- Stall torque @6.6V: 1.6kg-
- 4 x BO Motor
- 4 x BO Wheel
- 1 x HC-SR04 Ultrasonic Sensor
- 1 x Towerpro SG90 Mini Servo Motor
Arduino UNO R3 and Ultrasonic Sensor with SG90 Motor and Jumper Wires
Specifications:
- Ultrasonic Operating Voltage: 3.2 – 5.2 VDC
- SG90 Operating Voltage: 3.0 – 7.2V
- Ultrasonic sensor weight: 10 gm
- SG90 weight: 9 gm
- Ultrasonic Measurement Range: 3cm to 350 cm
- SG90 Rotational Degree: 180
- Jumper Wire Compatible with 2.54mm spacing pin headers
- Jumper Wire is Durable and reusable
- Microcontroller: ATmega328
- Arduino Uno Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
Package Includes:
- 1 x Ultrasonic Sensor HC-SR04
- 1 x TowerPro SG90 Servo Motor with Cable
- 1 x SG90 Set of Horns
- 1 x SG90 Set of Screws
- 1 x 40 pcs Male to Male jumper wire set
- 1 x 40 pcs Male to Female jumper wire set
- 1 x 40 pcs Female to Female jumper wire set
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
IR Sensor Module – Infrared Obstacle Avoidance Sensor
Specifications:
- Model: IR Sensor Module
- Type: Infrared Obstacle Avoidance Sensor
- Operating Voltage: 3.3V - 5V
- Detection Range: Adjustable, up to 20-30cm
- Detection Angle: Approximately 35 degrees
- Output Type: Digital Signal (0 or 1)
- Response Time: < 2ms
- Operating Temperature: -10°C to +50°C
- Dimensions: 3.2cm x 1.4cm x 0.5cm
- Compatibility: Compatible with Arduino, Raspberry Pi, and other microcontrollers
- Key Features: Adjustable sensitivity, easy to integrate, low power consumption
- Applications: Robotics, automation, industrial equipment, proximity sensing
Package Includes:
1 x IR Sensor Module
BO Motor, BO Wheel & Arduino UNO R3 with Jumper Wires 60 Pcs
Product Overview:
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 40P color DuPont line
- Length: 300mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 60 pcs chromatic color jumper wire
- High quality and in good working condition
- Durable and reusable
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
- 1 x 20 pcs Male to Male jumper wire set
- 1 x 20 pcs Male to Female jumper wire set
- 1 x 20 pcs Female to Female jumper wire set
- 4 x BO Motor
- 4 x BO Wheel
Ultrasonic Sensor with SG90 Motor and 10 pcs M-F Jumper Wire
PRODUCT OVERVIEW
- Ultrasonic Operating Voltage(VDC): 3.2 – 5.2
- SG90 Operating Voltage: 3.0 – 7.2V
- Ultrasonic weight (gm): 10
- SG90 weight (gm): 9
- Ultrasonic Measurement Range: 3cm to 350Cm
- SG90 Rotational Degree: 180
- Jumper Wire Compatible with 2.54mm spacing pin headers
- Jumper Wire Durable and reusable
- 1 x Ultrasonic Sensor HC-SR04
- 1 x TowerPro SG90 Servo Motor with Cable
- 1 x Set of Horns
- 1 x Set of Screws
- 1 x 10Pcs Male to Female Jumper Wire
Ultrasonic Sensor HC-SR04 Module Distance Sensor
Specifications:
- Model: HC-SR04
- Operating Voltage: 5V DC
- Operating Current: <15mA
- Operating Frequency: 40kHz
- Measuring Range: 2cm - 400cm
- Accuracy: Up to 3mm
- Operating Temperature: -15°C to 70°C
- Storage Temperature: -20°C to 80°C
- Dimensions: 45mm x 20mm x 15mm
- Weight: 10g
40 Pin Dupont Male to Female Jumper Wire, 40 Pieces
PRODUCT OVERVIEW:
- 40 P color DuPont line
- Weight: 45 gm
- Compatible with 2.54mm spacing pin headers
- 40 pcs chromatic male to female color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
DC Dual Shaft BO Gear Motor & Wheel With SG90 Servo Motor
PRODUCT OVERVIEW
- Operating Voltage 3V - 12V DC
- RPM Approximately 150 RPM
- No load current 40 - 80 mA
- Output Torque 3.5 kgf.cm
- High quality plastic wheel and BO-series motor
- Plastic Wheels with a slot that matches BO Motor Shaft are made to work with BO motors both Series I and II.
- 66mm diameter, 20mm width
- Operating Voltage: 5 V
- Sonar Sensing Range: 2-400 cm
- Max. Sensing Range: 450 cm
- Frequency: 40 kHz
- Operating voltage: 3.0V~ 7.2V
- Stall torque @4.8V : 1.2kg-cm
- Stall torque @6.6V: 1.6kg-
- 4 x BO Motor
- 4 x BO Wheel
- 1 x HC-SR04 Ultrasonic Sensor
- 1 x Towerpro SG90 Mini Servo Motor