You may be interested in…
ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module
Specifications:
- Model: ESP-01
- Chip: ESP8266
- Wireless Standard: 802.11 b/g/n
- Operating Voltage: 3.3V
- Operating Current: Average 80mA
- Operating Temperature: -40°C to +125°C
- Storage Temperature: -40°C to +125°C
- Flash Memory: 1MB
- Firmware: Supports AT commands
- Compatibility: Arduino IDE
- Dimensions: 24.8mm x 14.3mm x 3mm
- Weight: 2g
Package Includes:
1 x ESP-01 ESP8266 Serial WIFI Wireless Transceiver ModuleArduino Nano Soldered V3 Board Compatible with Arduino
Specifications:
- Compatibility: Compatible with Arduino Nano V3
- Pins: Pre-soldered for easy connection
- Microcontroller: ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limit): 6-20V
- Flash Memory: 32KB (ATmega328), of which 2KB used by the bootloader
- SRAM: 2KB (ATmega328)
- EEPROM: 1KB (ATmega328)
- Clock Speed: 16MHz
- Dimensions: 18.5 x 43.2 mm
- Weight: 7g
Package Includes:
1 x Arduino Nano V3 Soldered ATMEGA328 Compatible BoardArduino Uno R3 with Jumper Wires 120 Pcs
PRODUCT OVERVIEW
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 40P color DuPont line
- Length: 300mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 120 pcs chromatic color jump wire
- High quality and in good working condition
- Durable and reusable
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
- 1 x 40 pcs Male to Male jumper wire set
- 1 x 40 pcs Male to Female jumper wire set
- 1 x 40 pcs Female to Female jumper wire set
2.4 inch TFT LCD Display Shield for Arduino Uno
Specifications:
- Display Type: 2.4" diagonal Touch LCD TFT
- Resolution: 240Ă—320 pixels
- Color Depth: 18-bit (262,000 colors)
- Voltage Compatibility: 5V compatible, use with 3.3V or 5V logic
- MicroSD Card Slot: Included for additional storage options
- Compatibility: Works with Arduino Uno and Mega-compatible boards
Package Includes:
1 x 2.4 inch TFT LCD Display Shield for Arduino UNO Mega, 1 x Stylus PenBO Motor, BO Wheel & Arduino UNO R3 with Jumper Wires 60 Pcs
Product Overview:
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 40P color DuPont line
- Length: 300mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 60 pcs chromatic color jumper wire
- High quality and in good working condition
- Durable and reusable
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
- 1 x 20 pcs Male to Male jumper wire set
- 1 x 20 pcs Male to Female jumper wire set
- 1 x 20 pcs Female to Female jumper wire set
- 4 x BO Motor
- 4 x BO Wheel
16×2 Character LCD Display With Yellow Backlight
Specifications:
- Display Type: 16x2 Character LCD
- Backlight Color: Yellow
- Operating Voltage: 5V
- Interface: Parallel
- Controller: HD44780 Compatible
- Compatibility: Arduino Boards
- Operating Temperature: -20°C to 70°C
- Storage Temperature: -30°C to 80°C
- Dimensions: 80mm x 36mm x 12mm
- Weight: 30g
Package Includes:
1 x 16x2 Character LCD Display With Yellow BacklightArduino Nano V3 Soldered Board with USB Cable
Specifications:
- Microcontroller: ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limit): 6-20V
- Digital I/O Pins: 14 (6 of which are PWM)
- Analog Input Pins: 8
- Flash Memory: 32 KB (2 KB used by bootloader)
- SRAM: 2 KB
- EEPROM: 1 KB
- Clock Speed: 16 MHz
- Dimensions: 1.85 cm x 4.32 cm
- Weight: Approximately 7g
Package Includes:
1 x Nano Soldered V3 Board 1 x USB CableArduino Uno R3 with L293D Motor Driver
PRODUCT OVERVIEW:-
- Experience the power of Arduino Uno R3 combined with L293D motor driver shield for seamless motor control.
- Microcontroller ATmega328P With Operating Voltage : 5V
- Benefit from the ATmega328P microcontroller's abundant memory for program and data storage.
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Precisely control motors with the L293D shield's two H-bridge output channels.
- Optimize performance with a dual power supply configuration for both Arduino Uno R3 and motors.
- Explore a wide range of applications, including robotics, home automation, and motor-driven projects.
- Rely on the proven reliability and robustness of this widely used combination trusted by hobbyists, enthusiasts, and professionals.
- Expand project possibilities with compatibility with various sensors, actuators, and components.
Package Includes:
- 1 x Arduino Uno R3 with Cable
- 1 x L293D Motor Driver Shield
8 Channel Relay Board 5V Expansion Module with Optocoupler
Specifications:
- Product Name: 8 Channel Relay Board
- Voltage Compatibility: 5V (DC)
- Relay Type: Electromagnetic Relay
- Operating Temperature: -40°C to +85°C
- Input Voltage: 5V DC (Operating)
- Input Voltage Range: 3.3V to 12V DC
- Trigger Input Voltage: 0V (Low-Level Trigger) to VCC (High-Level Trigger)
Package Includes:
1 x 8 Channel Relay ModuleIR Sensor Module – Infrared Obstacle Avoidance Sensor
Specifications:
- Model: IR Sensor Module
- Type: Infrared Obstacle Avoidance Sensor
- Operating Voltage: 3.3V - 5V
- Detection Range: Adjustable, up to 20-30cm
- Detection Angle: Approximately 35 degrees
- Output Type: Digital Signal (0 or 1)
- Response Time: < 2ms
- Operating Temperature: -10°C to +50°C
- Dimensions: 3.2cm x 1.4cm x 0.5cm
- Compatibility: Compatible with Arduino, Raspberry Pi, and other microcontrollers
- Key Features: Adjustable sensitivity, easy to integrate, low power consumption
- Applications: Robotics, automation, industrial equipment, proximity sensing
Package Includes:
1 x IR Sensor ModuleSTM32F103C8T6 Microcomputer STM32 Microcontroller Board
Specifications:
- Microcontroller: STM32F103C8T6 ARM Cortex-M3
- Operating Voltage: 3.3V
- Input Voltage: 7V - 12V
- Digital I/O Pins: 37
- Analog Input Pins: 10
- Flash Memory: 64KB
- SRAM: 20KB
- Clock Speed: Up to 72MHz
- Communication: UART, SPI, I2C
- Programming: Compatible with Arduino IDE
- Dimensions: 52mm x 22mm
Package Includes:
1 x STM32F103C8T6 Minimum System BoardArduino Uno SMD Development Microcontroller Board With Cable
Specifications:
- Microcontroller: ATmega328P SMD
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- Flash Memory: 32 KB (ATmega328P), of which the bootloader uses 0.5 KB
- SRAM: 2 KB (ATmega328P)
- EEPROM: 1 KB (ATmega328P)
- Clock Speed: 16 MHz
- Length: 68.6 mm
- Width: 53.4 mm
- Weight: 25 g
- USB Interface: CH340G
- Compatible with the Arduino Uno platform
Package Includes:
1 x Arduino Uno R3 Development Microcontroller Board SMD Version 1 x USB Cable1602 LCD Display with I2C/IIC Serial Interface Adapter Module
Specifications:
- Display Type: Alphanumeric
- Display Size: 16 characters x 2 lines
- Interface: I2C
- Compatibility: Arduino, Raspberry Pi, ESP8266
- Dimensions: (L x W x H) 80mm x 36mm x 12mm
- Weight: 20g
- Operating Voltage: 5V
- Backlight: Yellow
Package Includes:
1 x LCD 16x2 1602 Alphanumeric Display Yellow 1 x I2C Module AdapterUltrasonic Sensor HC-SR04 Module Distance Sensor
Specifications:
- Model: HC-SR04
- Operating Voltage: 5V DC
- Operating Current: <15mA
- Operating Frequency: 40kHz
- Measuring Range: 2cm - 400cm
- Accuracy: Up to 3mm
- Operating Temperature: -15°C to 70°C
- Storage Temperature: -20°C to 80°C
- Dimensions: 45mm x 20mm x 15mm
- Weight: 10g
XL6009 Boost Converter Module DC-DC Step-Up Converter
Specifications:
- Input Voltage Range: 3V to 32V
- Output Voltage Range: 5V to 35V
- Maximum Output Current: 4A
- Efficiency: Up to 94%
- Operating Frequency: 400kHz
- Operating Temperature Range: -40°C to +85°C
- Dimensions: 43mm x 20mm x 14mm (L x W x H)
- Weight: 7 grams
- Input Capacitor: 100uF (minimum)
- Output Capacitor: 470uF (minimum)
- Short Circuit Protection: Yes
- Over Temperature Protection: Yes
- Reverse Polarity Protection: Yes
- PCB Material: FR-4 Grade with 1.6mm thickness
- Mounting Holes: 3.5mm diameter, spaced 30mm apart (centre to centre)
Package Includes:
1 x XL6009 Boost Converter ModuleHC-05 Bluetooth Module 6pin with Button
Specifications:
- Model: HC-05 Bluetooth Module
- Operating Voltage: 3.3V
- Communication Protocol: Bluetooth 2.0
- Range: Up to 10 meters
- Interface: UART
- Pin Configuration: 6-pin design with button
- Compatibility: Arduino Uno and other microcontroller boards
- Dimensions: 28mm x 15mm x 2.35mm
- Weight: 5 grams
Package Includes:
1 x HC-05 Bluetooth Module 6pin with ButtonNodeMCU ESP8266 V3 Lua CH340 Wi-Fi Development Board
Specifications:
- NodeMCU ESP8266 V3 with CH340 chipset.
- Microcontroller: ESP8266
- USB-to-Serial Converter: CH340
- WiFi Connectivity: 802.11 b/g/n at 2.4GHz
- Security Protocols: Supports WPA/WPA2
- Operating Modes: STA/AP/STA+AP
- Programming: Supports programming via Lua script or Arduino IDE
- Flash Memory: 4MByte
Package Includes:
1 x NodeMCU ESP8266 V3 Lua CH340 WiFi Development BoardArduino UNO R3 and Ultrasonic Sensor with SG90 Motor and Jumper Wires
Specifications:
- Ultrasonic Operating Voltage: 3.2 – 5.2 VDC
- SG90 Operating Voltage: 3.0 – 7.2V
- Ultrasonic sensor weight: 10 gm
- SG90 weight: 9 gm
- Ultrasonic Measurement Range: 3cm to 350 cm
- SG90 Rotational Degree: 180
- Jumper Wire Compatible with 2.54mm spacing pin headers
- Jumper Wire is Durable and reusable
- Microcontroller: ATmega328
- Arduino Uno Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
Package Includes:
- 1 x Ultrasonic Sensor HC-SR04
- 1 x TowerPro SG90 Servo Motor with Cable
- 1 x SG90 Set of Horns
- 1 x SG90 Set of Screws
- 1 x 40 pcs Male to Male jumper wire set
- 1 x 40 pcs Male to Female jumper wire set
- 1 x 40 pcs Female to Female jumper wire set
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
NodeMCU ESP8266 D1 R2 WiFi UNO Based Development Board
Specifications:
- Microcontroller: ESP8266
- Operating Voltage: 3.3V
- Digital I/O Pins: 11
- Analog Input Pins: 1 (Max input: 3.2V)
- Clock Speed: 80MHz/160MHz
- Flash Memory: 4MB
- WiFi: 802.11 b/g/n
- USB-TTL Converter: CH340G
- Compatibility: Arduino IDE, NodeMCU, Lua, MicroPython
- Dimensions: 70mm x 54mm
- Weight: 30g
Package Includes:
1 x NodeMCU ESP8266 D1 R2 WiFi UNO Development Board40 Pin Dupont Male to Female Jumper Wire, 40 Pieces
PRODUCT OVERVIEW:
- 40 P color DuPont line
- Weight: 45 gm
- Compatible with 2.54mm spacing pin headers
- 40 pcs chromatic male to female color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
DC Dual Shaft BO Motor & Wheel with SG90 Motor and Ultrasonic Sensor
PRODUCT OVERVIEW
- Operating Voltage 3V - 12V DC
- RPM Approximately 150 RPM
- No load current 40 - 80 mA
- Output Torque 3.5 kgf.cm
- High quality plastic wheel and BO-series motor
- Plastic Wheels with a slot that matches BO Motor Shaft are made to work with BO motors both Series I and II.
- 66mm diameter, 20mm width
- Operating Voltage: 5 V
- Sonar Sensing Range: 2-400 cm
- Max. Sensing Range: 450 cm
- Frequency: 40 kHz
- Operating voltage: 3.0V~ 7.2V
- Stall torque @4.8V : 1.2kg-cm
- Stall torque @6.6V: 1.6kg-
- 4 x BO Motor
- 4 x BO Wheel
- 1 x HC-SR04 Ultrasonic Sensor
- 1 x Towerpro SG90 Mini Servo Motor
0.96 Inch OLED Display Module 4 Pin I2C IIC Interface for Arduino
Specifications:
- Display Size: 0.96 Inch
- Display Type: OLED
- Interface: I2C IIC
- Pin Configuration: 4 Pins
- Compatibility: Arduino and other microcontrollers
- Communication: I2C for easy integration
- Resolution: High resolution for clear images
- Dimensions: 27mm (L) x 27mm (W) x 4.2mm (H)
- Weight: 15g
Package Includes:
1 x 0.96 Inch OLED Display ModuleArduino D1 Mini V2 Mini NodeMCU Development Board
Specifications:
- Microcontroller: ESP8266
- Operating Voltage: 3.3V
- Digital I/O Pins: 11
- Analog Input Pins: 1 (3.2V max input)
- Flash Memory: 4 MB
- Clock Speed: 80 MHz
- WiFi: 802.11 b/g/n
- Dimensions: 34.2mm x 25.6mm
- Lua scripting support