Cart - Vayuyaan

PRODUCT OVERVIEW

Constant Current: 30A (Max 40A<10s).
BEC: 5V 3A.
Input Voltage: 11.1 ~ 11.7 V.
Li-Po battery: 2S ~ 3S.
Ni-MH 4-10 CELLS Auto-Detect

Package Includes: 1 x ESC 30A Simonk Electronic Speed Controller with Connectors.

Arduino Nano Soldered V3 Board Compatible with Arduino

Electronic Modules, Microcontroller Boards

Specifications:

Compatibility: Compatible with Arduino Nano V3
Pins: Pre-soldered for easy connection
Microcontroller: ATmega328
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Input Voltage (limit): 6-20V
Flash Memory: 32KB (ATmega328), of which 2KB used by the bootloader
SRAM: 2KB (ATmega328)
EEPROM: 1KB (ATmega328)
Clock Speed: 16MHz
Dimensions: 18.5 x 43.2 mm
Weight: 7g

Package Includes:

1 x Arduino Nano V3 Soldered ATMEGA328 Compatible Board

1602 LCD Display with I2C/IIC Serial Interface Adapter Module

KITS, LCD Display

Specifications:

Display Type: Alphanumeric
Display Size: 16 characters x 2 lines
Interface: I2C
Compatibility: Arduino, Raspberry Pi, ESP8266
Dimensions: (L x W x H) 80mm x 36mm x 12mm
Weight: 20g
Operating Voltage: 5V
Backlight: Yellow

Package Includes:

1 x LCD 16x2 1602 Alphanumeric Display Yellow 1 x I2C Module Adapter

NodeMCU ESP8266 CP2102 Board – IoT Development Board

Specifications:

Microcontroller: ESP8266 ESP-12E
USB-to-Serial Converter: CP2102
WiFi Protocol: 802.11 b/g/n
Programming: Pre-flashed with NodeMCU firmware
Compatible with Arduino IDE for code upload

Package Includes:

1 x ESP8266 NodeMCU CP2102 Board

40 Pin Dupont Male to Female Jumper Wire, 40 Pieces

Wires & Cables

PRODUCT OVERVIEW:

40 P color DuPont line
Weight: 45 gm
Compatible with 2.54mm spacing pin headers
40 pcs chromatic male to female color jump wire
High quality and in good working condition
Durable and reusable
Easy to install and use

Package includes : 1 x 30 CM Dupont Wire Multi-Color Jumper Cable, Male to Female Jumper Wire 40 PCS

Arduino Uno SMD Development Microcontroller Board With Cable

Specifications:

Microcontroller: ATmega328P SMD
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 6
Flash Memory: 32 KB (ATmega328P), of which the bootloader uses 0.5 KB
SRAM: 2 KB (ATmega328P)
EEPROM: 1 KB (ATmega328P)
Clock Speed: 16 MHz
Length: 68.6 mm
Width: 53.4 mm
Weight: 25 g
USB Interface: CH340G
Compatible with the Arduino Uno platform

Package Includes:

1 x Arduino Uno R3 Development Microcontroller Board SMD Version 1 x USB Cable

5V Single Channel Relay Module for Arduino | One Channel Relay

Rated 4.38 out of 5

Specifications:

Number of Channels: 1
Operating Temperature Range: -40 to 85 °C
Switching Voltage (AC): 250V @ 10A
Switching Voltage (DC): 30V @ 10A
Trigger Current: 20 mA
Trigger Voltage: 5 V (DC)

Package Includes:

1 x Single Channel 5V Relay Module One Channel

30A ESC Simonk Electronic Speed controller with Connector (Set of 4)

PRODUCT OVERVIEW

Model: SIMONK 30A.
Constant Current: 30A (Max 40A < 10 sec).
BEC: 5V 2A.
Suitable Batteries: 2-3S LiPo.
Application: BLDC Motors, Multirotor, Rc Planes, etc.

Package Includes: 4 x Simonk 30A BLDC ESC Electronic Speed Controller

HC-05 Bluetooth Module 6pin with Button

Electronic Modules, Sensor

Specifications:

Model: HC-05 Bluetooth Module
Operating Voltage: 3.3V
Communication Protocol: Bluetooth 2.0
Range: Up to 10 meters
Interface: UART
Pin Configuration: 6-pin design with button
Compatibility: Arduino Uno and other microcontroller boards
Dimensions: 28mm x 15mm x 2.35mm
Weight: 5 grams

Package Includes:

1 x HC-05 Bluetooth Module 6pin with Button

NodeMCU ESP8266 D1 R2 WiFi UNO Based Development Board

Specifications:

Microcontroller: ESP8266
Operating Voltage: 3.3V
Digital I/O Pins: 11
Analog Input Pins: 1 (Max input: 3.2V)
Clock Speed: 80MHz/160MHz
Flash Memory: 4MB
WiFi: 802.11 b/g/n
USB-TTL Converter: CH340G
Compatibility: Arduino IDE, NodeMCU, Lua, MicroPython
Dimensions: 70mm x 54mm
Weight: 30g

Package Includes:

1 x NodeMCU ESP8266 D1 R2 WiFi UNO Development Board

RFID Sensor Module RC522 for Secure and Efficient Card Reading

Specifications of RFID Sensor RC522:

Integrated MF RC522 chip for efficient RFID reading
Operates at 13.56MHz for high-speed communication
Low-voltage, cost-effective, compact design
Non-contact card chip with up to 60mm reading distance
Supports SPI protocol for easy CPU integration
Ideal for smart meters, handheld devices, access control

Package Includes:

1 x RFID-RC522 Reader/Writer Module
1 x Standard blank RFID card
1 x Straight header strip
1 x Right-angle header strip
1 x Special-shaped key-chain RFID tag

Arduino D1 Mini V2 Mini NodeMCU Development Board

Electronic Modules, Microcontroller Boards

Specifications:

Microcontroller: ESP8266
Operating Voltage: 3.3V
Digital I/O Pins: 11
Analog Input Pins: 1 (3.2V max input)
Flash Memory: 4 MB
Clock Speed: 80 MHz
WiFi: 802.11 b/g/n
Dimensions: 34.2mm x 25.6mm
Lua scripting support

Package Includes:

1 x Arduino D1 Mini V2 Mini NodeMCU Development Board

NodeMCU ESP32 WiFi Development Board with LWIP Protocol

Rated 4.41 out of 5

Specifications:

Chipset: ESP32
Processor: Dual-core Tensilica LX6 microprocessor
Connectivity: WiFi (802.11 b/g/n), Bluetooth (v4.2 and BLE)
Operating Voltage: 3.3V
Digital I/O Pins: 28
Analog Input Pins: 6
UART Interfaces: 3
SPI Interfaces: 4
I2C Interfaces: 2
Flash Memory: 4MB
RAM: 520KB SRAM
Clock Speed: 240MHz
Dimensions: 58mm x 85mm x 40mm
Weight: 120g

Package Includes:

1 x NodeMCU ESP32 WiFi Development Board

Arduino UNO R3 and Ultrasonic Sensor with SG90 Motor and Jumper Wires

KITS

Specifications:

Ultrasonic Operating Voltage: 3.2 – 5.2 VDC
SG90 Operating Voltage: 3.0 – 7.2V
Ultrasonic sensor weight: 10 gm
SG90 weight: 9 gm
Ultrasonic Measurement Range: 3cm to 350 cm
SG90 Rotational Degree: 180
Jumper Wire Compatible with 2.54mm spacing pin headers
Jumper Wire is Durable and reusable
Microcontroller: ATmega328
Arduino Uno Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 6

Package Includes:

1 x Ultrasonic Sensor HC-SR04
1 x TowerPro SG90 Servo Motor with Cable
1 x SG90 Set of Horns
1 x SG90 Set of Screws
1 x 40 pcs Male to Male jumper wire set
1 x 40 pcs Male to Female jumper wire set
1 x 40 pcs Female to Female jumper wire set
1 x Arduino Uno R3 Development Board
1 x USB Cable

30A ESC Electronic Speed Controller With Dean Connector

Specifications:

Voltage Range: 7.4V - 14.8V
Continuous Current: 30A
BEC Output: 5V/2A
Input Connector: Dean Connector
Output Connector: 3.5mm bullet connectors
Dimensions: 45mm x 25mm x 10mm
Weight: 25g (including wires)
Compatibility: Suitable for RC cars, boats, drones, and other vehicles
Color: Yellow casing for easy identification
Quantity: Set of 4 ESCs

Package Includes:

4 x ESC 30A Simonk Electronic Speed Controller with Connectors.

1400KV Brushless Motor With Soldered Bullet Connector (Set of 4)

Specifications:

Model: A2212
KV: 1400
Motor Type: Brushless DC (BLDC)
Number of Motors: 4
Connector Type: Soldered bullet connectors
Compatible With: Quadcopters, hexacopters, octocopters
Recommended Propeller Size: 8 to 10 inches
Weight: Approximately 50g per motor
Dimensions: 27.5mm x 27mm x 27mm
Operating Voltage: 7.4V to 11.1V
Maximum Continuous Current: 12A
Maximum Continuous Power: 120W
Shaft Diameter: 3.17mm
Shaft Length: 12mm
Mounting Hole Spacing: 16mm x 19mm
Motor Wire Length: Approximately 150mm

Package Includes:

1 x A2212 1400Kv Brushless Motor for Drone
1 x Prop Adapter
A Motor Holder (X-type) and a set of screws

L293D Motor Driver Shield Or Servo Shield For Arduino

PRODUCT OVERVIEW

Capable of Driving 2 Stepper or DC motor
Bidirectional Control
Motor Voltage rating: 4.5V to 25V
Can also drive servo motor
High efficiency and simple usage
Continuous Output current 1.2A

Package Includes: 1 x L293D Motor Driver/Servo Shield for Arduino

Jumper Wires M-M, M-F, F-F, 20cm, 60 Pieces

Wires & Cables

Rated 4.44 out of 5

Specifications:

Quantity: 60 pieces
Length: 20cm each
Wire Type: Male-to-male, male-to-female, female-to-female
Compatibility: Suitable for use with breadboards and Arduino
Material: High-quality copper core with PVC insulation
Color: Assorted colors for easy identification
Application: Ideal for electronics prototyping, DIY projects, and circuit design
Flexibility: Flexible and durable wires for easy handling

Package Includes:

1 x 20pcs Male to Male Jumper Wire set
1 x 20pcs Male to Female Jumper Wire set
1 x 20pcs Female to Female Jumper Wire set

IIC/I2C Serial Interface Adapter Module for LCD1602 Display

Specifications:

Interface: I2C/IIC
Display: LCD1602 (16x2 characters)
Operating Voltage: 5V
Operating Temperature: -20°C to 70°C
Input Voltage: 5V DC
PCB Size (L x W) mm: 42 x 20
Weight: 4g
Compatibility: Arduino, Raspberry Pi, and other microcontrollers

Package Includes:

1 x IIC/I2C Serial Interface Adapter Module for LCD1602 Display

Arduino Uno R3 Development Board ATmega328P with USB Cable

Electronic Modules, Microcontroller Boards

Rated 4.75 out of 5

Product Overview:

Micro-controller : ATmega328.
Operating Voltage: 5V.
Input Voltage (recommended) : 7-12V.
Digital I/O Pins: 14 (of which 6 provide PWM output).
Analog Input Pins: 6

Package Includes :

1 x Arduino Uno R3 Development Board
1 x USB Cable

1602 LCD Board Keypad Shield with Blue Backlight

LCD Display

Specifications:

Display: 16x2 LCD display
Backlight: Blue backlight
Input: Keypad for user input
Compatibility: Compatible with Arduino Uno, Mega, Leonardo, and other compatible boards
Mounting: Easy to mount on Arduino board

Package Includes:

1 x LCD Display 1602 Board Keypad Shield with Blue Backlight

IR Sensor Module – Infrared Obstacle Avoidance Sensor

Sensor

Rated 4.67 out of 5

Specifications:

Model: IR Sensor Module
Type: Infrared Obstacle Avoidance Sensor
Operating Voltage: 3.3V - 5V
Detection Range: Adjustable, up to 20-30cm
Detection Angle: Approximately 35 degrees
Output Type: Digital Signal (0 or 1)
Response Time: < 2ms
Operating Temperature: -10°C to +50°C
Dimensions: 3.2cm x 1.4cm x 0.5cm
Compatibility: Compatible with Arduino, Raspberry Pi, and other microcontrollers
Key Features: Adjustable sensitivity, easy to integrate, low power consumption
Applications: Robotics, automation, industrial equipment, proximity sensing

Package Includes:

1 x IR Sensor Module

Arduino Uno R3 with L293D Motor Driver

Electronic Modules, KITS

PRODUCT OVERVIEW:-

Experience the power of Arduino Uno R3 combined with L293D motor driver shield for seamless motor control.
Microcontroller ATmega328P With Operating Voltage : 5V
Benefit from the ATmega328P microcontroller's abundant memory for program and data storage.
Digital I/O Pins 14 (of which 6 provide PWM output)
Precisely control motors with the L293D shield's two H-bridge output channels.
Optimize performance with a dual power supply configuration for both Arduino Uno R3 and motors.
Explore a wide range of applications, including robotics, home automation, and motor-driven projects.
Rely on the proven reliability and robustness of this widely used combination trusted by hobbyists, enthusiasts, and professionals.
Expand project possibilities with compatibility with various sensors, actuators, and components.

Package Includes:

1 x Arduino Uno R3 with Cable
1 x L293D Motor Driver Shield

NodeMCU ESP8266 V3 Lua CH340 Wi-Fi Development Board

Specifications:

NodeMCU ESP8266 V3 with CH340 chipset.
Microcontroller: ESP8266
USB-to-Serial Converter: CH340
WiFi Connectivity: 802.11 b/g/n at 2.4GHz
Security Protocols: Supports WPA/WPA2
Operating Modes: STA/AP/STA+AP
Programming: Supports programming via Lua script or Arduino IDE
Flash Memory: 4MByte

Package Includes:

1 x NodeMCU ESP8266 V3 Lua CH340 WiFi Development Board

A2212 1000KV BLDC Motor With Soldered Bullet Connector (Set of 4)