3dBi Magnetic Mount Antenna for GSM FCT Device (10 Feet Long)
40 Pin Dupont Female to Female Jumper Wire, 40 Pieces
40 Pin Dupont Male to Female Jumper Wire, 40 Pieces
PRODUCT OVERVIEW:
- 40 P color DuPont line
- Weight: 45 gm
- Compatible with 2.54mm spacing pin headers
- 40 pcs chromatic male to female color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
40 Pin Dupont Male to Male Jumper Wire, 40 Pieces
PRODUCT OVERVIEW:
- 40P color DuPont line
- Weight: 45 gm
- Compatible with 2.54mm spacing pin headers
- 40pcs chromatic male to male color jumper wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
400 Point Breadboard Half Size Solderless Breadboard
Specifications:
- 400-point breadboard for prototyping circuits
- Half-size design for portability and convenience
- No soldering is required for easy circuit assembly
- Compatible with a wide range of electronic components
- Durable construction for long-lasting performance
- Ideal for hobbyists, students, and professionals
Package Includes:
1 x 400 Point Breadboard Half Size Solderless Breadboard4000W SCR 220V Voltage Regulator Dimming Speed Regulation
Specifications:
- Power Rating: 4000W
- Input Voltage: 220V AC
- Control Type: SCR (Silicon Controlled Rectifier)
- Control Mode: Phase Control
- Dimensions: 58mm x 85mm x 40mm (L x W x H)
- Weight: 122g
- Working Voltage: AC 220V
- Frequency Range: 50Hz ~ 60Hz
Package Includes:
1 x 4000W SCR 220V Voltage Regulator4×4 Matrix Keypad Membrane Switch for Arduino and other MCU
Specifications:
- Keypad Layout: 4x4 matrix (16 keys)
- Key Material: Silicone rubber
- Operating Voltage: 3-5V DC
- Interface: 8-pin female header
- Connection: Jumper wire compatible
- Compatibility: Arduino, other MCU projects
- Operating Temperature: -20°C to 70°C
- Storage Temperature: -40°C to 85°C
- Key Life: 1 million cycles
- Dimensions: 77mm x 69mm x 1mm
- Weight: 15g
Package Includes:
1x Matrix Keypad 4x4 Membrane Switch Keypad Module58mm Bluetooth Thermal Printer – High-Quality Printer for Receipts
Specifications:
- Model: 58mm Bluetooth Thermal Printer
- Paper Width: 58mm
- Connectivity: Bluetooth and USB
- Print Speed: Up to 90mm/s
- Compatibility: Compatible with Android, iOS, and Windows devices
- Power Source: DC 12V/2A
- Product Dimensions: 17 x 11 x 8 cm
- Weight: 900 g
- Supported Languages: English, Spanish, French, German, Italian, Chinese, Japanese
- Warranty: 1 year
Package Includes:
- 1 x 58mm Bluetooth Thermal Printer
- 1 x USB Cable
- 1 x Power Cable
- 1 x CD Drive
- 1 x User Manual
58mm Thermal Receipt Printer
PRODUCT OVERVIEW:-
- The 58mm thermal receipt printer support cash drawer driving.
- Quality printing low noise and high-speed printing.
- Quick and easy paper change with low maintenance cost.
- Easy install - the USB POS printer is simple and convenient to operate.
- Compatible ESC/POS print commands, support bitmap, and download graphics printing.
Package Includes:
- 1 x 58mm Thermal Printer
- 1 x USB Cable
- 1 x Power Cable
- 1 x CD Drive
- 1 x User Manual
58mm Thermal Receipt Printer (Black)
PRODUCT OVERVIEW:-
- The 58mm thermal receipt printer support cash drawer driving.
- Quality printing low noise and high-speed printing.
- Quick and easy paper change with low maintenance cost.
- Easy install - the USB POS printer is simple and convenient to operate.
- Compatible ESC/POS print commands, support bitmap, and download graphics printing.
Package Includes:
- 1 x 58mm Thermal Printer
- 1 x USB Cable
- 1 x Power Cable
- 1 x CD Drive
- 1 x User Manual
5V 2 Channel Relay Module with Optocoupler for Arduino
5V 4 Channel Relay Control Board Module
Specifications:
- Voltage Compatibility: 5V
- Number of Channels: 4
- Driver Current per Channel: 15-20mA
- Relay Type: High-current, AC250V 10A; DC30V 10A
- Interface Compatibility: Arduino, 8051, AVR, PIC, DSP, ARM, MSP430, TTL logic
- LED Indicators: Included for relay output status
Package Includes:
1 x 5V 4 Channel Relay Board Module5V Single Channel Relay Module for Arduino | One Channel Relay
65mm BO Wheels, Robot Wheel For BO Motors
PRODUCT OVERVIEW
- A tire with sponge liner for more strength
- With upgraded tire tread for greater friction
- New design wheel for better combination with the motor
- Diameter: 65 mm
- The material of Wheel: High-strength plastic
- The material of Tyre: Rubber
- Color: Yellow
8 Channel Relay Board 5V Expansion Module with Optocoupler
Specifications:
- Product Name: 8 Channel Relay Board
- Voltage Compatibility: 5V (DC)
- Relay Type: Electromagnetic Relay
- Operating Temperature: -40°C to +85°C
- Input Voltage: 5V DC (Operating)
- Input Voltage Range: 3.3V to 12V DC
- Trigger Input Voltage: 0V (Low-Level Trigger) to VCC (High-Level Trigger)
Package Includes:
1 x 8 Channel Relay ModuleA2212 1000KV BLDC Motor With Soldered Bullet Connector (Set of 4)
PRODUCT OVERVIEW
- Motor KV: 1000
- Current Capacity: 12A/60S
- LiPO Batteries: 2S-3S
- Efficiency Current: 4-10A
- Shaft Diameter: 3.17 mm
- Prop Adapter is quality tested before shipping to customers.
- 4 x A2212 1000Kv Brushless Motor for Drone
- 4 x Prop Adapter
- A Motor Holder (X-type) and set of screws
A4988 Stepper Motor Driver with Heatsink
Specifications:
- Model: A4988 Stepper Motor Driver with Heatsink
- Compatible with: Arduino Uno
- Operating Voltage: 8V to 35V
- Output Current: Up to 2A per phase (with adequate cooling)
- Microstepping: Full, half, quarter, eighth, and sixteenth-step modes
- Built-in Heatsink: Yes
- Connector Type: 4-pin header for motor connection, 2-pin header for power supply
- Additional Features: Thermal shutdown circuitry, cross-current protection
- Dimensions: 20mm x 15mm x 11mm
- Weight: 5 grams
Package Includes:
1 x A4988 Stepper Motor Driver with HeatsinkArduino D1 Mini V2 Mini NodeMCU Development Board
Specifications:
- Microcontroller: ESP8266
- Operating Voltage: 3.3V
- Digital I/O Pins: 11
- Analog Input Pins: 1 (3.2V max input)
- Flash Memory: 4 MB
- Clock Speed: 80 MHz
- WiFi: 802.11 b/g/n
- Dimensions: 34.2mm x 25.6mm
- Lua scripting support
Package Includes:
1 x Arduino D1 Mini V2 Mini NodeMCU Development BoardArduino Nano Soldered V3 Board Compatible with Arduino
Specifications:
- Compatibility: Compatible with Arduino Nano V3
- Pins: Pre-soldered for easy connection
- Microcontroller: ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limit): 6-20V
- Flash Memory: 32KB (ATmega328), of which 2KB used by the bootloader
- SRAM: 2KB (ATmega328)
- EEPROM: 1KB (ATmega328)
- Clock Speed: 16MHz
- Dimensions: 18.5 x 43.2 mm
- Weight: 7g
Package Includes:
1 x Arduino Nano V3 Soldered ATMEGA328 Compatible BoardArduino Nano V3 Soldered Board with USB Cable
Specifications:
- Microcontroller: ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limit): 6-20V
- Digital I/O Pins: 14 (6 of which are PWM)
- Analog Input Pins: 8
- Flash Memory: 32 KB (2 KB used by bootloader)
- SRAM: 2 KB
- EEPROM: 1 KB
- Clock Speed: 16 MHz
- Dimensions: 1.85 cm x 4.32 cm
- Weight: Approximately 7g
Package Includes:
1 x Nano Soldered V3 Board 1 x USB CableArduino UNO R3 and Ultrasonic Sensor with SG90 Motor and Jumper Wires
Specifications:
- Ultrasonic Operating Voltage: 3.2 – 5.2 VDC
- SG90 Operating Voltage: 3.0 – 7.2V
- Ultrasonic sensor weight: 10 gm
- SG90 weight: 9 gm
- Ultrasonic Measurement Range: 3cm to 350 cm
- SG90 Rotational Degree: 180
- Jumper Wire Compatible with 2.54mm spacing pin headers
- Jumper Wire is Durable and reusable
- Microcontroller: ATmega328
- Arduino Uno Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
Package Includes:
- 1 x Ultrasonic Sensor HC-SR04
- 1 x TowerPro SG90 Servo Motor with Cable
- 1 x SG90 Set of Horns
- 1 x SG90 Set of Screws
- 1 x 40 pcs Male to Male jumper wire set
- 1 x 40 pcs Male to Female jumper wire set
- 1 x 40 pcs Female to Female jumper wire set
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
Arduino Uno R3 Development Board ATmega328P with USB Cable
Arduino Uno R3 with Jumper Wires 120 Pcs
PRODUCT OVERVIEW
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 40P color DuPont line
- Length: 300mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 120 pcs chromatic color jump wire
- High quality and in good working condition
- Durable and reusable
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
- 1 x 40 pcs Male to Male jumper wire set
- 1 x 40 pcs Male to Female jumper wire set
- 1 x 40 pcs Female to Female jumper wire set
Arduino Uno R3 with Jumper Wires 60 Pieces
Product Overview:
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 40P color DuPont line
- Length: 300mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 120 pcs chromatic color jump wire
- High quality and in good working condition
- Durable and reusable
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
- 1 x 20 pcs Male to Male jumper wire set
- 1 x 20 pcs Male to Female jumper wire set
- 1 x 20 pcs Female to Female jumper wire set