Continue shopping “RFID Sensor Module RC522 for Secure and Efficient Card Reading” has been added to your cart.
You may be interested in…
1602 LCD Display with I2C/IIC Serial Interface Adapter Module
Specifications:
- Display Type: Alphanumeric
- Display Size: 16 characters x 2 lines
- Interface: I2C
- Compatibility: Arduino, Raspberry Pi, ESP8266
- Dimensions: (L x W x H) 80mm x 36mm x 12mm
- Weight: 20g
- Operating Voltage: 5V
- Backlight: Yellow
Package Includes:
1 x LCD 16x2 1602 Alphanumeric Display Yellow 1 x I2C Module Adapter
16×2 Character LCD Display With Yellow Backlight
Specifications:
- Display Type: 16x2 Character LCD
- Backlight Color: Yellow
- Operating Voltage: 5V
- Interface: Parallel
- Controller: HD44780 Compatible
- Compatibility: Arduino Boards
- Operating Temperature: -20°C to 70°C
- Storage Temperature: -30°C to 80°C
- Dimensions: 80mm x 36mm x 12mm
- Weight: 30g
Package Includes:
1 x 16x2 Character LCD Display With Yellow Backlight
Arduino Uno SMD Development Microcontroller Board With Cable
Specifications:
- Microcontroller: ATmega328P SMD
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- Flash Memory: 32 KB (ATmega328P), of which the bootloader uses 0.5 KB
- SRAM: 2 KB (ATmega328P)
- EEPROM: 1 KB (ATmega328P)
- Clock Speed: 16 MHz
- Length: 68.6 mm
- Width: 53.4 mm
- Weight: 25 g
- USB Interface: CH340G
- Compatible with the Arduino Uno platform
Package Includes:
1 x Arduino Uno R3 Development Microcontroller Board SMD Version 1 x USB Cable
8 Channel Relay Board 5V Expansion Module with Optocoupler
Specifications:
- Product Name: 8 Channel Relay Board
- Voltage Compatibility: 5V (DC)
- Relay Type: Electromagnetic Relay
- Operating Temperature: -40°C to +85°C
- Input Voltage: 5V DC (Operating)
- Input Voltage Range: 3.3V to 12V DC
- Trigger Input Voltage: 0V (Low-Level Trigger) to VCC (High-Level Trigger)
Package Includes:
1 x 8 Channel Relay Module
IR Sensor Module – Infrared Obstacle Avoidance Sensor
Specifications:
- Model: IR Sensor Module
- Type: Infrared Obstacle Avoidance Sensor
- Operating Voltage: 3.3V - 5V
- Detection Range: Adjustable, up to 20-30cm
- Detection Angle: Approximately 35 degrees
- Output Type: Digital Signal (0 or 1)
- Response Time: < 2ms
- Operating Temperature: -10°C to +50°C
- Dimensions: 3.2cm x 1.4cm x 0.5cm
- Compatibility: Compatible with Arduino, Raspberry Pi, and other microcontrollers
- Key Features: Adjustable sensitivity, easy to integrate, low power consumption
- Applications: Robotics, automation, industrial equipment, proximity sensing
Package Includes:
1 x IR Sensor Module
40 Pin Dupont Male to Female Jumper Wire, 40 Pieces
PRODUCT OVERVIEW:
- 40 P color DuPont line
- Weight: 45 gm
- Compatible with 2.54mm spacing pin headers
- 40 pcs chromatic male to female color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
Ultrasonic Sensor HC-SR04 Module Distance Sensor
Specifications:
- Model: HC-SR04
- Operating Voltage: 5V DC
- Operating Current: <15mA
- Operating Frequency: 40kHz
- Measuring Range: 2cm - 400cm
- Accuracy: Up to 3mm
- Operating Temperature: -15°C to 70°C
- Storage Temperature: -20°C to 80°C
- Dimensions: 45mm x 20mm x 15mm
- Weight: 10g
28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver
Specifications:
- Stepper Motor Model: 28BYJ-48
- Stepper Motor Driver Model: ULN2003
- Voltage: 5V DC
- Step Angle: 5.625°/64
- Reduction Ratio: 1/64
- Diameter: 28mm
- Voltage: 5V
- Phase: 4
- Current: 0.1A
- Resistance: 50Ω
- Motor Length: 34mm
- Weight: 30g
Package Includes:
1 x 28BYJ-48 Stepper Motor 1 x ULN2003 Stepper Motor Driver Module
NodeMCU ESP8266 V3 Lua CH340 Wi-Fi Development Board
Specifications:
- NodeMCU ESP8266 V3 with CH340 chipset.
- Microcontroller: ESP8266
- USB-to-Serial Converter: CH340
- WiFi Connectivity: 802.11 b/g/n at 2.4GHz
- Security Protocols: Supports WPA/WPA2
- Operating Modes: STA/AP/STA+AP
- Programming: Supports programming via Lua script or Arduino IDE
- Flash Memory: 4MByte
Package Includes:
1 x NodeMCU ESP8266 V3 Lua CH340 WiFi Development Board
DC Dual Shaft BO Motor & Wheel with SG90 Motor and Ultrasonic Sensor
PRODUCT OVERVIEW
- Operating Voltage 3V - 12V DC
- RPM Approximately 150 RPM
- No load current 40 - 80 mA
- Output Torque 3.5 kgf.cm
- High quality plastic wheel and BO-series motor
- Plastic Wheels with a slot that matches BO Motor Shaft are made to work with BO motors both Series I and II.
- 66mm diameter, 20mm width
- Operating Voltage: 5 V
- Sonar Sensing Range: 2-400 cm
- Max. Sensing Range: 450 cm
- Frequency: 40 kHz
- Operating voltage: 3.0V~ 7.2V
- Stall torque @4.8V : 1.2kg-cm
- Stall torque @6.6V: 1.6kg-
- 4 x BO Motor
- 4 x BO Wheel
- 1 x HC-SR04 Ultrasonic Sensor
- 1 x Towerpro SG90 Mini Servo Motor
NodeMCU ESP32 WiFi Development Board with LWIP Protocol
Specifications:
- Chipset: ESP32
- Processor: Dual-core Tensilica LX6 microprocessor
- Connectivity: WiFi (802.11 b/g/n), Bluetooth (v4.2 and BLE)
- Operating Voltage: 3.3V
- Digital I/O Pins: 28
- Analog Input Pins: 6
- UART Interfaces: 3
- SPI Interfaces: 4
- I2C Interfaces: 2
- Flash Memory: 4MB
- RAM: 520KB SRAM
- Clock Speed: 240MHz
- Dimensions: 58mm x 85mm x 40mm
- Weight: 120g
Package Includes:
1 x NodeMCU ESP32 WiFi Development Board
Arduino D1 Mini V2 Mini NodeMCU Development Board
Specifications:
- Microcontroller: ESP8266
- Operating Voltage: 3.3V
- Digital I/O Pins: 11
- Analog Input Pins: 1 (3.2V max input)
- Flash Memory: 4 MB
- Clock Speed: 80 MHz
- WiFi: 802.11 b/g/n
- Dimensions: 34.2mm x 25.6mm
- Lua scripting support
Package Includes:
1 x Arduino D1 Mini V2 Mini NodeMCU Development Board
Arduino Nano Soldered V3 Board Compatible with Arduino
Specifications:
- Compatibility: Compatible with Arduino Nano V3
- Pins: Pre-soldered for easy connection
- Microcontroller: ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limit): 6-20V
- Flash Memory: 32KB (ATmega328), of which 2KB used by the bootloader
- SRAM: 2KB (ATmega328)
- EEPROM: 1KB (ATmega328)
- Clock Speed: 16MHz
- Dimensions: 18.5 x 43.2 mm
- Weight: 7g