You may be interested in…
28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver
Specifications:
- Stepper Motor Model: 28BYJ-48
- Stepper Motor Driver Model: ULN2003
- Voltage: 5V DC
- Step Angle: 5.625°/64
- Reduction Ratio: 1/64
- Diameter: 28mm
- Voltage: 5V
- Phase: 4
- Current: 0.1A
- Resistance: 50Ω
- Motor Length: 34mm
- Weight: 30g
Package Includes:
1 x 28BYJ-48 Stepper Motor 1 x ULN2003 Stepper Motor Driver ModuleBO Motor, BO Wheel & Arduino UNO R3 with Jumper Wires 60 Pcs
Product Overview:
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 40P color DuPont line
- Length: 300mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 60 pcs chromatic color jumper wire
- High quality and in good working condition
- Durable and reusable
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
- 1 x 20 pcs Male to Male jumper wire set
- 1 x 20 pcs Male to Female jumper wire set
- 1 x 20 pcs Female to Female jumper wire set
- 4 x BO Motor
- 4 x BO Wheel
HC-05 Bluetooth Module 6pin with Button
Specifications:
- Model: HC-05 Bluetooth Module
- Operating Voltage: 3.3V
- Communication Protocol: Bluetooth 2.0
- Range: Up to 10 meters
- Interface: UART
- Pin Configuration: 6-pin design with button
- Compatibility: Arduino Uno and other microcontroller boards
- Dimensions: 28mm x 15mm x 2.35mm
- Weight: 5 grams
Package Includes:
1 x HC-05 Bluetooth Module 6pin with ButtonIR Sensor Module – Infrared Obstacle Avoidance Sensor
Specifications:
- Model: IR Sensor Module
- Type: Infrared Obstacle Avoidance Sensor
- Operating Voltage: 3.3V - 5V
- Detection Range: Adjustable, up to 20-30cm
- Detection Angle: Approximately 35 degrees
- Output Type: Digital Signal (0 or 1)
- Response Time: < 2ms
- Operating Temperature: -10°C to +50°C
- Dimensions: 3.2cm x 1.4cm x 0.5cm
- Compatibility: Compatible with Arduino, Raspberry Pi, and other microcontrollers
- Key Features: Adjustable sensitivity, easy to integrate, low power consumption
- Applications: Robotics, automation, industrial equipment, proximity sensing
Package Includes:
1 x IR Sensor ModuleArduino UNO R3 and Ultrasonic Sensor with SG90 Motor and Jumper Wires
Specifications:
- Ultrasonic Operating Voltage: 3.2 – 5.2 VDC
- SG90 Operating Voltage: 3.0 – 7.2V
- Ultrasonic sensor weight: 10 gm
- SG90 weight: 9 gm
- Ultrasonic Measurement Range: 3cm to 350 cm
- SG90 Rotational Degree: 180
- Jumper Wire Compatible with 2.54mm spacing pin headers
- Jumper Wire is Durable and reusable
- Microcontroller: ATmega328
- Arduino Uno Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
Package Includes:
- 1 x Ultrasonic Sensor HC-SR04
- 1 x TowerPro SG90 Servo Motor with Cable
- 1 x SG90 Set of Horns
- 1 x SG90 Set of Screws
- 1 x 40 pcs Male to Male jumper wire set
- 1 x 40 pcs Male to Female jumper wire set
- 1 x 40 pcs Female to Female jumper wire set
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
65mm BO Wheels, Robot Wheel For BO Motors
PRODUCT OVERVIEW
- A tire with sponge liner for more strength
- With upgraded tire tread for greater friction
- New design wheel for better combination with the motor
- Diameter: 65 mm
- The material of Wheel: High-strength plastic
- The material of Tyre: Rubber
- Color: Yellow
Arduino Uno R3 with Jumper Wires 60 Pieces
Product Overview:
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 40P color DuPont line
- Length: 300mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 120 pcs chromatic color jump wire
- High quality and in good working condition
- Durable and reusable
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
- 1 x 20 pcs Male to Male jumper wire set
- 1 x 20 pcs Male to Female jumper wire set
- 1 x 20 pcs Female to Female jumper wire set
40 Pin Dupont Male to Male Jumper Wire, 40 Pieces
PRODUCT OVERVIEW:
- 40P color DuPont line
- Weight: 45 gm
- Compatible with 2.54mm spacing pin headers
- 40pcs chromatic male to male color jumper wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module
Specifications:
- Model: ESP-01
- Chip: ESP8266
- Wireless Standard: 802.11 b/g/n
- Operating Voltage: 3.3V
- Operating Current: Average 80mA
- Operating Temperature: -40°C to +125°C
- Storage Temperature: -40°C to +125°C
- Flash Memory: 1MB
- Firmware: Supports AT commands
- Compatibility: Arduino IDE
- Dimensions: 24.8mm x 14.3mm x 3mm
- Weight: 2g
Package Includes:
1 x ESP-01 ESP8266 Serial WIFI Wireless Transceiver ModuleArduino Uno R3 with L293D Motor Driver
PRODUCT OVERVIEW:-
- Experience the power of Arduino Uno R3 combined with L293D motor driver shield for seamless motor control.
- Microcontroller ATmega328P With Operating Voltage : 5V
- Benefit from the ATmega328P microcontroller's abundant memory for program and data storage.
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Precisely control motors with the L293D shield's two H-bridge output channels.
- Optimize performance with a dual power supply configuration for both Arduino Uno R3 and motors.
- Explore a wide range of applications, including robotics, home automation, and motor-driven projects.
- Rely on the proven reliability and robustness of this widely used combination trusted by hobbyists, enthusiasts, and professionals.
- Expand project possibilities with compatibility with various sensors, actuators, and components.
Package Includes:
- 1 x Arduino Uno R3 with Cable
- 1 x L293D Motor Driver Shield
A4988 Stepper Motor Driver with Heatsink
Specifications:
- Model: A4988 Stepper Motor Driver with Heatsink
- Compatible with: Arduino Uno
- Operating Voltage: 8V to 35V
- Output Current: Up to 2A per phase (with adequate cooling)
- Microstepping: Full, half, quarter, eighth, and sixteenth-step modes
- Built-in Heatsink: Yes
- Connector Type: 4-pin header for motor connection, 2-pin header for power supply
- Additional Features: Thermal shutdown circuitry, cross-current protection
- Dimensions: 20mm x 15mm x 11mm
- Weight: 5 g
Package Includes:
1 x A4988 Stepper Motor Driver with HeatsinkArduino Uno SMD Development Microcontroller Board With Cable
Specifications:
- Microcontroller: ATmega328P SMD
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- Flash Memory: 32 KB (ATmega328P), of which the bootloader uses 0.5 KB
- SRAM: 2 KB (ATmega328P)
- EEPROM: 1 KB (ATmega328P)
- Clock Speed: 16 MHz
- Length: 68.6 mm
- Width: 53.4 mm
- Weight: 25 g
- USB Interface: CH340G
- Compatible with the Arduino Uno platform
Package Includes:
1 x Arduino Uno R3 Development Microcontroller Board SMD Version 1 x USB CableL298N Motor Driver Module with PWM Control
PRODUCT OVERVIEW
- Driver chip: L298 dual H-bridge driver chip.
- Operates up to 35V DC.
- Drive part of the peak current Io: 2A / Bridge.
- The logical part of the terminal power supply range Vss:4.5V-5.5V
- The logical part of the operating current range: 0 ~ 36mA.
- Maximum power consumption: 20W.
- Current Sense for each motor.
- Heatsink for better performance.
- Power-On LED indicator.
- Drives up to 4 motors.
Arduino Nano V3 Soldered Board with USB Cable
Specifications:
- Microcontroller: ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limit): 6-20V
- Digital I/O Pins: 14 (6 of which are PWM)
- Analog Input Pins: 8
- Flash Memory: 32 KB (2 KB used by bootloader)
- SRAM: 2 KB
- EEPROM: 1 KB
- Clock Speed: 16 MHz
- Dimensions: 1.85 cm x 4.32 cm
- Weight: Approximately 7g