HC-05 Bluetooth Module 6pin with Button
Specifications:
- Model: HC-05 Bluetooth Module
- Operating Voltage: 3.3V
- Communication Protocol: Bluetooth 2.0
- Range: Up to 10 meters
- Interface: UART
- Pin Configuration: 6-pin design with button
- Compatibility: Arduino Uno and other microcontroller boards
- Dimensions: 28mm x 15mm x 2.35mm
- Weight: 5 grams
Package Includes:
1 x HC-05 Bluetooth Module 6pin with ButtonHX711 Weight Sensor 24 Bit A/D Precision Pressure Sensor
Specifications:
- Model: HX711 Weight Sensor 24 Bit A/D Precision Pressure Sensor
- Compatibility: Arduino Nano
- A/D Converter: 24-bit
- Technology: Strain gauge
- Usage: Weight measurement, pressure sensing
- Compatibility: Compatible with various weight cells
- Precision: High precision for accurate readings
- Ease of Use: Easy to integrate and operate
- Application: Suitable for hobbyist and professional projects
- Dimensions: Compact size for easy installation
Package Includes:
1 x HX711 Weight Sensor 24 Bit A/D Precision Pressure SensorIIC/I2C Serial Interface Adapter Module for LCD1602 Display
Specifications:
- Interface: I2C/IIC
- Display: LCD1602 (16x2 characters)
- Operating Voltage: 5V
- Operating Temperature: -20°C to 70°C
- Input Voltage: 5V DC
- PCB Size (L x W) mm: 42 x 20
- Weight: 4g
- Compatibility: Arduino, Raspberry Pi, and other microcontrollers
Package Includes:
1 x IIC/I2C Serial Interface Adapter Module for LCD1602 DisplayIMAX B3 Lipo Battery Balance Charger for 2S-3S LiPo
Specifications:
- Input Voltage: AC 100-240V, 50/60Hz
- Output Current: 3x 800mA
- Charging Power: 20W
- Compatible Battery Types: 2S-3S LiPo batteries
- Balance Ports: 3
- Dimensions: 90mm x 55mm x 35mm
- Weight: 180g
- Safety Features: Reverse polarity protection, overcharge protection
- Cooling System: Built-in cooling fan
- Certifications: CE, RoHS
Package Includes:
1 x IMAX B3 LiPo Battery Balance Charger 1 x Power Cord 1 x User ManualIR Sensor Module – Infrared Obstacle Avoidance Sensor
Specifications:
- Model: IR Sensor Module
- Type: Infrared Obstacle Avoidance Sensor
- Operating Voltage: 3.3V - 5V
- Detection Range: Adjustable, up to 20-30cm
- Detection Angle: Approximately 35 degrees
- Output Type: Digital Signal (0 or 1)
- Response Time: < 2ms
- Operating Temperature: -10°C to +50°C
- Dimensions: 3.2cm x 1.4cm x 0.5cm
- Compatibility: Compatible with Arduino, Raspberry Pi, and other microcontrollers
- Key Features: Adjustable sensitivity, easy to integrate, low power consumption
- Applications: Robotics, automation, industrial equipment, proximity sensing
Package Includes:
1 x IR Sensor ModuleJumper Wires M-M, M-F, F-F, 20cm, 120 Pieces
PRODUCT OVERVIEW
- 40P color DuPont line
- Length: 300mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 120 pcs chromatic color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
- 1 x 40 pcs Male to Male jumper wire set
- 1 x 40 pcs Male to Female jumper wire set
- 1 x 40 pcs Female to Female jumper wire set
Jumper Wires M-M, M-F, F-F, 20cm, 60 Pieces
Specifications:
- Quantity: 60 pieces
- Length: 20cm each
- Wire Type: Male-to-male, male-to-female, female-to-female
- Compatibility: Suitable for use with breadboards and Arduino
- Material: High-quality copper core with PVC insulation
- Color: Assorted colors for easy identification
- Application: Ideal for electronics prototyping, DIY projects, and circuit design
- Flexibility: Flexible and durable wires for easy handling
- 1 x 20pcs Male to Male Jumper Wire set
- 1 x 20pcs Male to Female Jumper Wire set
- 1 x 20pcs Female to Female Jumper Wire set
L293D Motor Driver Shield Or Servo Shield For Arduino
L298N Motor Driver Module with PWM Control
PRODUCT OVERVIEW
- Driver chip: L298 dual H-bridge driver chip.
- Operates up to 35V DC.
- Drive part of the peak current Io: 2A / Bridge.
- The logical part of the terminal power supply range Vss:4.5V-5.5V
- The logical part of the operating current range: 0 ~ 36mA.
- Maximum power consumption: 20W.
- Current Sense for each motor.
- Heatsink for better performance.
- Power-On LED indicator.
- Drives up to 4 motors.
LDR Sensor LM393 Photosensitive Light Dependent Sensor
Specifications:
- Model: LM393 Light Dependent Resistor (LDR) Sensor
- Operating Voltage: 3.3V - 5V
- Output Type: Digital (0 or 1)
- Detection Range: Adjustable
- Sensitivity: High
- Operating Temperature: -40°C to 85°C
- Dimensions: 19mm x 15mm x 6mm
- Weight: 2g
- Interface: Analog/Digital
- Compatibility: Arduino, Raspberry Pi, and other microcontrollers
Package Includes:
1 x LDR Sensor LM393 Light Dependent Resistor SensorLeyden Smart Digital Electronic Programmable Switch Timer
Specifications:
- Model: Leyden Smart Digital Electronic Programmable Switch
- Type: Digital Timer Switch
- Voltage: 230Volts
- Easy Setup: User-friendly interface for simple installation
- Programmable: Set multiple timer settings for different devices.
- Convenient: Say goodbye to manual switching with this electronic timer
Package Includes:
1 x Leyden Smart Digital Electronic Programmable SwitchLM2596 DC-DC Buck Converter Step Down Power Supply Module
Specifications:
- Input Voltage: 4V-35V
- Output Voltage: 1.23V-30V
- Output Current: 2A (3A with heatsink)
- Conversion Efficiency: Up to 92%
- Switching Frequency: 150 kHz
- Operating Temperature: -40°C to +85°C
- Dimensions: 43mm x 21mm x 14mm
- Weight: 11g
Package Includes:
1 x LM2596 DC-DC Buck Converter Step Down Power Supply ModuleMAX7219 Dot Matrix LED Display Module for Arduino Uno
Specifications:
- Model: MAX7219 Dot Matrix LED Display Module
- Input Voltage: 5V
- LED Display: Supports dot matrix displays and 7-segment digital displays
- Control Interface: Serial interface
- Compatibility: Arduino, ARM, Raspberry Pi, and other microcontrollers
- Cascadable: Can be cascaded to control multiple displays
- Maximum Display Size: 8x8 for dot matrix displays
- Dimensions: 5.4cm x 3.2cm x 1.5cm
- Weight: 10g
Package Includes:
1 x MAX7219 Dot Matrix LED Display ModuleMB102 830 Points Breadboard with 65Pcs Jumper Wires
Specifications:
- Breadboard Model: MB102
- Total Points: 830
- Jumper Wires Included: 65 pieces
- Jumper Wire Lengths: Various lengths for flexible connections
- Jumper Wire Colors: Assorted colors for easy organization
- Compatibility: Suitable for use with a wide range of electronic components
- Material: High-quality plastic for durability
- Dimensions: Compact size for easy storage and transport
- Usage: Ideal for prototyping and testing electronic circuits without soldering
Package Includes:
- 1 x MB102 830 Points Solderless Prototype PCB Breadboard
- 1 x 65 Male to Male Jumper Wires
MG996R Servo Motor High Torque Servo Motor (360° Rotation)
Specifications:
- Model: MG996R
- Operating Voltage: 4.8 - 6.6V
- Stall Torque: 9.4kg/cm (4.8V), 11kg/cm (6V)
- Operating Speed: 0.17sec/60° (4.8V), 0.14sec/60° (6V)
- Gear Type: Metal
- Rotation: 360°
- Dimensions: 40.7 x 19.7 x 42.9mm
- Weight: 55g
- Connector Wire Length: 300mm
- Operating Temperature: -30°C to +60°C
- Compatibility: Most microcontrollers
- Control System: Pulse Width Modulation (PWM)
Package Includes:
1 x TowerPro MG996R Digital High Torque Servo MotorMicro USB Cable USB-2.0 Mini B Cable for Arduino Nano
Specifications:
- Cable Type: Micro USB
- Connector Type: USB-2.0 Mini B
- Length: 20 cm
- Compatibility: Arduino Nano and other devices with USB-2.0 Mini B ports
- Features: Plug-and-Play, Durable Construction, High-Speed Data Transfer
- Material: PVC
- Color: Blue
Package Includes:
1 x Micro USB Cable USB-2.0 Mini B Cable for Arduino Nano (20 cm)Nano Board Unsoldered with USB Cable for Arduino
Specifications:
- Microcontroller: ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 14 (6 provide PWM output)
- Analog Input Pins: 8
- SRAM: 2 KB (ATmega328)
- EEPROM: 1 KB (ATmega328)
- Clock Speed: 16 MHz
- USB Chip: CH340G
- Dimensions: 45mm x 18mm
- Weight: 7g
Package Includes:
1 x Nano Board R3 CH340 Chip 1 x USB Mini CableNEO 6M GPS Module Geographic Positioning System with EPROM
Specifications:
- Product Name: NEO 6M GPS Module with EPROM
- Chipset: ublox NEO-6M
- Compatibility: Arduino, Raspberry Pi, and other microcontroller platforms
- Satellite Systems: GPS, GLONASS, BeiDou
- Memory: EPROM for configuration storage
- Interfaces: UART serial interface
- Operating Voltage: 3.3V - 5V
- Operating Current: 45mA
- Operating Temperature: -40°C to +85°C
- Antenna: Ceramic patch antenna with LNA
- Position Accuracy: 2.5m CEP (Circular Error Probable)
- Update Rate: Up to 5Hz
- Dimensions: 25mm x 35mm
- Weight: 50g
Package Includes:
1 x NEO-6M GPS Board 1 x Detachable AntennaNodeMCU ESP8266 CP2102 Board – IoT Development Board
NodeMCU ESP8266 D1 R2 WiFi UNO Based Development Board
Specifications:
- Microcontroller: ESP8266
- Operating Voltage: 3.3V
- Digital I/O Pins: 11
- Analog Input Pins: 1 (Max input: 3.2V)
- Clock Speed: 80MHz/160MHz
- Flash Memory: 4MB
- WiFi: 802.11 b/g/n
- USB-TTL Converter: CH340G
- Compatibility: Arduino IDE, NodeMCU, Lua, MicroPython
- Dimensions: 70mm x 54mm
- Weight: 30g