Continue shopping “IMAX B3 Lipo Battery Balance Charger for 2S-3S LiPo” has been added to your cart.
You may be interested in…
XL6009 Boost Converter Module DC-DC Step-Up Converter
Specifications:
- Input Voltage Range: 3V to 32V
- Output Voltage Range: 5V to 35V
- Maximum Output Current: 4A
- Efficiency: Up to 94%
- Operating Frequency: 400kHz
- Operating Temperature Range: -40°C to +85°C
- Dimensions: 43mm x 20mm x 14mm (L x W x H)
- Weight: 7 grams
- Input Capacitor: 100uF (minimum)
- Output Capacitor: 470uF (minimum)
- Short Circuit Protection: Yes
- Over Temperature Protection: Yes
- Reverse Polarity Protection: Yes
- PCB Material: FR-4 Grade with 1.6mm thickness
- Mounting Holes: 3.5mm diameter, spaced 30mm apart (centre to centre)
Package Includes:
1 x XL6009 Boost Converter Module
A2212 1000KV BLDC Motor With Soldered Bullet Connector (Set of 4)
PRODUCT OVERVIEW
- Motor KV: 1000
- Current Capacity: 12A/60S
- LiPO Batteries: 2S-3S
- Efficiency Current: 4-10A
- Shaft Diameter: 3.17 mm
- Prop Adapter is quality tested before shipping to customers.
- 4 x A2212 1000Kv Brushless Motor for Drone
- 4 x Prop Adapter
- A Motor Holder (X-type) and set of screws
NodeMCU ESP8266 D1 R2 WiFi UNO Based Development Board
Specifications:
- Microcontroller: ESP8266
- Operating Voltage: 3.3V
- Digital I/O Pins: 11
- Analog Input Pins: 1 (Max input: 3.2V)
- Clock Speed: 80MHz/160MHz
- Flash Memory: 4MB
- WiFi: 802.11 b/g/n
- USB-TTL Converter: CH340G
- Compatibility: Arduino IDE, NodeMCU, Lua, MicroPython
- Dimensions: 70mm x 54mm
- Weight: 30g
Package Includes:
1 x NodeMCU ESP8266 D1 R2 WiFi UNO Development Board
Arduino Nano V3 Soldered Board with USB Cable
Specifications:
- Microcontroller: ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limit): 6-20V
- Digital I/O Pins: 14 (6 of which are PWM)
- Analog Input Pins: 8
- Flash Memory: 32 KB (2 KB used by bootloader)
- SRAM: 2 KB
- EEPROM: 1 KB
- Clock Speed: 16 MHz
- Dimensions: 1.85 cm x 4.32 cm
- Weight: Approximately 7g
Package Includes:
1 x Nano Soldered V3 Board 1 x USB Cable
Arduino Uno SMD Development Microcontroller Board With Cable
Specifications:
- Microcontroller: ATmega328P SMD
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- Flash Memory: 32 KB (ATmega328P), of which the bootloader uses 0.5 KB
- SRAM: 2 KB (ATmega328P)
- EEPROM: 1 KB (ATmega328P)
- Clock Speed: 16 MHz
- Length: 68.6 mm
- Width: 53.4 mm
- Weight: 25 g
- USB Interface: CH340G
- Compatible with the Arduino Uno platform
Package Includes:
1 x Arduino Uno R3 Development Microcontroller Board SMD Version 1 x USB Cable
ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module
Specifications:
- Model: ESP-01
- Chip: ESP8266
- Wireless Standard: 802.11 b/g/n
- Operating Voltage: 3.3V
- Operating Current: Average 80mA
- Operating Temperature: -40°C to +125°C
- Storage Temperature: -40°C to +125°C
- Flash Memory: 1MB
- Firmware: Supports AT commands
- Compatibility: Arduino IDE
- Dimensions: 24.8mm x 14.3mm x 3mm
- Weight: 2g
Package Includes:
1 x ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module
16×2 LCD Display with I2C Module IIC Serial Interface Adapter
Specifications:
- Display Size: 16 characters x 2 lines
- Display Type: LCD (Liquid Crystal Display)
- Interface: I2C (Inter-Integrated Circuit)
- I2C Address: 0x27
- Backlight: Blue
- Operating Voltage: 5V
- Dimensions (L x W x H): 80mm x 36mm x 12mm
- Weight: 30g
- Compatible with Arduino, Raspberry Pi, and other microcontrollers
- Easy to use and integrate into projects
- Ideal for displaying text, numbers, and symbols
- Includes I2C module for simplified interfacing
Package Includes:
1 x LCD 16×2 1602 Alphanumeric Display Blue 1 x I2C Module
NodeMCU ESP8266 V3 Lua CH340 Wi-Fi Development Board
Specifications:
- NodeMCU ESP8266 V3 with CH340 chipset.
- Microcontroller: ESP8266
- USB-to-Serial Converter: CH340
- WiFi Connectivity: 802.11 b/g/n at 2.4GHz
- Security Protocols: Supports WPA/WPA2
- Operating Modes: STA/AP/STA+AP
- Programming: Supports programming via Lua script or Arduino IDE
- Flash Memory: 4MByte
Package Includes:
1 x NodeMCU ESP8266 V3 Lua CH340 WiFi Development Board
30A ESC Electronic Speed Controller With Dean Connector
Specifications:
- Voltage Range: 7.4V - 14.8V
- Continuous Current: 30A
- BEC Output: 5V/2A
- Input Connector: Dean Connector
- Output Connector: 3.5mm bullet connectors
- Dimensions: 45mm x 25mm x 10mm
- Weight: 25g (including wires)
- Compatibility: Suitable for RC cars, boats, drones, and other vehicles
- Color: Yellow casing for easy identification
- Quantity: Set of 4 ESCs
Package Includes:
4 x ESC 30A Simonk Electronic Speed Controller with Connectors.
1602 LCD Display with I2C/IIC Serial Interface Adapter Module
Specifications:
- Display Type: Alphanumeric
- Display Size: 16 characters x 2 lines
- Interface: I2C
- Compatibility: Arduino, Raspberry Pi, ESP8266
- Dimensions: (L x W x H) 80mm x 36mm x 12mm
- Weight: 20g
- Operating Voltage: 5V
- Backlight: Yellow
Package Includes:
1 x LCD 16x2 1602 Alphanumeric Display Yellow 1 x I2C Module Adapter
NodeMCU ESP32 WiFi Development Board with LWIP Protocol
Specifications:
- Chipset: ESP32
- Processor: Dual-core Tensilica LX6 microprocessor
- Connectivity: WiFi (802.11 b/g/n), Bluetooth (v4.2 and BLE)
- Operating Voltage: 3.3V
- Digital I/O Pins: 28
- Analog Input Pins: 6
- UART Interfaces: 3
- SPI Interfaces: 4
- I2C Interfaces: 2
- Flash Memory: 4MB
- RAM: 520KB SRAM
- Clock Speed: 240MHz
- Dimensions: 58mm x 85mm x 40mm
- Weight: 120g
Package Includes:
1 x NodeMCU ESP32 WiFi Development Board
Arduino Uno R3 with L293D Motor Driver
PRODUCT OVERVIEW:-
- Experience the power of Arduino Uno R3 combined with L293D motor driver shield for seamless motor control.
- Microcontroller ATmega328P With Operating Voltage : 5V
- Benefit from the ATmega328P microcontroller's abundant memory for program and data storage.
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Precisely control motors with the L293D shield's two H-bridge output channels.
- Optimize performance with a dual power supply configuration for both Arduino Uno R3 and motors.
- Explore a wide range of applications, including robotics, home automation, and motor-driven projects.
- Rely on the proven reliability and robustness of this widely used combination trusted by hobbyists, enthusiasts, and professionals.
- Expand project possibilities with compatibility with various sensors, actuators, and components.
Package Includes:
- 1 x Arduino Uno R3 with Cable
- 1 x L293D Motor Driver Shield
Battery Tester 1-8S Lipo Battery Voltage Tester
Specifications:
- Compatibility: 1-8S lipo batteries
- Voltage Measurement Range: 3.7V-30V
- Voltage Display Resolution: 0.01V
- Voltage Display Accuracy: ±0.03V
- Operating Temperature: -10°C to 50°C
- Display: LED screen
- Dimensions: 40mm x 25mm x 10mm
- Weight: 10g
- Features: Overvoltage and undervoltage alarm, low voltage alarm, reverse polarity protection
Package Includes:
1 x Battery Tester 1-8S Lipo Battery Voltage Tester
8 Channel Relay Board 5V Expansion Module with Optocoupler
Specifications:
- Product Name: 8 Channel Relay Board
- Voltage Compatibility: 5V (DC)
- Relay Type: Electromagnetic Relay
- Operating Temperature: -40°C to +85°C
- Input Voltage: 5V DC (Operating)
- Input Voltage Range: 3.3V to 12V DC
- Trigger Input Voltage: 0V (Low-Level Trigger) to VCC (High-Level Trigger)
Package Includes:
1 x 8 Channel Relay Module
STM32F103C8T6 Microcomputer STM32 Microcontroller Board
Specifications:
- Microcontroller: STM32F103C8T6 ARM Cortex-M3
- Operating Voltage: 3.3V
- Input Voltage: 7V - 12V
- Digital I/O Pins: 37
- Analog Input Pins: 10
- Flash Memory: 64KB
- SRAM: 20KB
- Clock Speed: Up to 72MHz
- Communication: UART, SPI, I2C
- Programming: Compatible with Arduino IDE
- Dimensions: 52mm x 22mm
Package Includes:
1 x STM32F103C8T6 Minimum System Board
NEO 6M GPS Module Geographic Positioning System with EPROM
Specifications:
- Product Name: NEO 6M GPS Module with EPROM
- Chipset: ublox NEO-6M
- Compatibility: Arduino, Raspberry Pi, and other microcontroller platforms
- Satellite Systems: GPS, GLONASS, BeiDou
- Memory: EPROM for configuration storage
- Interfaces: UART serial interface
- Operating Voltage: 3.3V - 5V
- Operating Current: 45mA
- Operating Temperature: -40°C to +85°C
- Antenna: Ceramic patch antenna with LNA
- Position Accuracy: 2.5m CEP (Circular Error Probable)
- Update Rate: Up to 5Hz
- Dimensions: 25mm x 35mm
- Weight: 50g
Package Includes:
1 x NEO-6M GPS Board 1 x Detachable Antenna
Arduino Nano Soldered V3 Board Compatible with Arduino
Specifications:
- Compatibility: Compatible with Arduino Nano V3
- Pins: Pre-soldered for easy connection
- Microcontroller: ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limit): 6-20V
- Flash Memory: 32KB (ATmega328), of which 2KB used by the bootloader
- SRAM: 2KB (ATmega328)
- EEPROM: 1KB (ATmega328)
- Clock Speed: 16MHz
- Dimensions: 18.5 x 43.2 mm
- Weight: 7g
Package Includes:
1 x Arduino Nano V3 Soldered ATMEGA328 Compatible Board
FlySky FS-i6 2.4G 6CH RC Transmitter with Receiver FS-iA6B
Specifications:
- Model: FlySky FS-i6
- Channels: 6
- Frequency: 2.4GHz
- Receiver: FS-iA6B
- Control Range: Over 500 meters
- Power Supply: 4 x AA batteries (not included)
- Compatibility: RC cars, drones, and other devices
- Dimensions: (Transmitter) 174 x 89 x 190mm; (Receiver) 47 x 26.2 x 15mm
- Weight: (Transmitter) 392g; (Receiver) 6.4g
Package Includes:
1x FlySky FS-i6 2.4G 6CH PPM RC Transmitter 1x FS-iA6B Receiver 1x User Manual
Arduino Uno R3 with Jumper Wires 60 Pieces
Product Overview:
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 40P color DuPont line
- Length: 300mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 120 pcs chromatic color jump wire
- High quality and in good working condition
- Durable and reusable
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
- 1 x 20 pcs Male to Male jumper wire set
- 1 x 20 pcs Male to Female jumper wire set
- 1 x 20 pcs Female to Female jumper wire set
1400KV Brushless Motor With Soldered Bullet Connector (Set of 4)
Specifications:
- Model: A2212
- KV: 1400
- Motor Type: Brushless DC (BLDC)
- Number of Motors: 4
- Connector Type: Soldered bullet connectors
- Compatible With: Quadcopters, hexacopters, octocopters
- Recommended Propeller Size: 8 to 10 inches
- Weight: Approximately 50g per motor
- Dimensions: 27.5mm x 27mm x 27mm
- Operating Voltage: 7.4V to 11.1V
- Maximum Continuous Current: 12A
- Maximum Continuous Power: 120W
- Shaft Diameter: 3.17mm
- Shaft Length: 12mm
- Mounting Hole Spacing: 16mm x 19mm
- Motor Wire Length: Approximately 150mm
Package Includes:
- 1 x A2212 1400Kv Brushless Motor for Drone
- 1 x Prop Adapter
- A Motor Holder (X-type) and a set of screws
Servo Tester 3Ch Digital Multi Servo Tester ESC RC Consistency
Specifications:
- Channels: 3
- Input Voltage: 4.8-6.0V
- Operating Voltage: DC 4.8-6V
- Output Signal: 1.5ms±0.5ms
- Material: Plastic
- Size: 48mm x 42mm x 17mm
- Weight: 31g
- Compatible with: servo motors and electronic speed controllers (ESCs)
- Easy-to-use controls for adjusting settings
- Compact and lightweight design for portability
- Durable construction for long-lasting use
- Ideal for hobbyists and professionals alike
- Application: Ideal for testing and troubleshooting servo motors and ESCs in RC vehicles
Package Includes:
1 x Servo Tester 3Ch Digital Multi Servo Tester ESC RC Consistency
IIC/I2C Serial Interface Adapter Module for LCD1602 Display
Specifications:
- Interface: I2C/IIC
- Display: LCD1602 (16x2 characters)
- Operating Voltage: 5V
- Operating Temperature: -20°C to 70°C
- Input Voltage: 5V DC
- PCB Size (L x W) mm: 42 x 20
- Weight: 4g
- Compatibility: Arduino, Raspberry Pi, and other microcontrollers
Package Includes:
1 x IIC/I2C Serial Interface Adapter Module for LCD1602 Display
Arduino D1 Mini V2 Mini NodeMCU Development Board
Specifications:
- Microcontroller: ESP8266
- Operating Voltage: 3.3V
- Digital I/O Pins: 11
- Analog Input Pins: 1 (3.2V max input)
- Flash Memory: 4 MB
- Clock Speed: 80 MHz
- WiFi: 802.11 b/g/n
- Dimensions: 34.2mm x 25.6mm
- Lua scripting support
