Continue shopping “Arduino Uno R3 with L293D Motor Driver” has been added to your cart.
Cart totals
| Subtotal | ₹1,648.00 |
|---|---|
| Shipping |
Shipping to Madhya Pradesh. |
| Total | ₹1,648.00 |
You may be interested in…
Arduino Uno R3 with Jumper Wires 120 Pcs
PRODUCT OVERVIEW
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 40P color DuPont line
- Length: 300mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 120 pcs chromatic color jump wire
- High quality and in good working condition
- Durable and reusable
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
- 1 x 40 pcs Male to Male jumper wire set
- 1 x 40 pcs Male to Female jumper wire set
- 1 x 40 pcs Female to Female jumper wire set
L298N Motor Driver Module with PWM Control
PRODUCT OVERVIEW
- Driver chip: L298 dual H-bridge driver chip.
- Operates up to 35V DC.
- Drive part of the peak current Io: 2A / Bridge.
- The logical part of the terminal power supply range Vss:4.5V-5.5V
- The logical part of the operating current range: 0 ~ 36mA.
- Maximum power consumption: 20W.
- Current Sense for each motor.
- Heatsink for better performance.
- Power-On LED indicator.
- Drives up to 4 motors.
Arduino UNO R3 and Ultrasonic Sensor with SG90 Motor and Jumper Wires
Specifications:
- Ultrasonic Operating Voltage: 3.2 – 5.2 VDC
- SG90 Operating Voltage: 3.0 – 7.2V
- Ultrasonic sensor weight: 10 gm
- SG90 weight: 9 gm
- Ultrasonic Measurement Range: 3cm to 350 cm
- SG90 Rotational Degree: 180
- Jumper Wire Compatible with 2.54mm spacing pin headers
- Jumper Wire is Durable and reusable
- Microcontroller: ATmega328
- Arduino Uno Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
Package Includes:
- 1 x Ultrasonic Sensor HC-SR04
- 1 x TowerPro SG90 Servo Motor with Cable
- 1 x SG90 Set of Horns
- 1 x SG90 Set of Screws
- 1 x 40 pcs Male to Male jumper wire set
- 1 x 40 pcs Male to Female jumper wire set
- 1 x 40 pcs Female to Female jumper wire set
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
DC Dual Shaft BO Gear Motor & Wheel With SG90 Servo Motor
PRODUCT OVERVIEW
- Operating Voltage 3V - 12V DC
- RPM Approximately 150 RPM
- No load current 40 - 80 mA
- Output Torque 3.5 kgf.cm
- High quality plastic wheel and BO-series motor
- Plastic Wheels with a slot that matches BO Motor Shaft are made to work with BO motors both Series I and II.
- 66mm diameter, 20mm width
- Operating Voltage: 5 V
- Sonar Sensing Range: 2-400 cm
- Max. Sensing Range: 450 cm
- Frequency: 40 kHz
- Operating voltage: 3.0V~ 7.2V
- Stall torque @4.8V : 1.2kg-cm
- Stall torque @6.6V: 1.6kg-
- 4 x BO Motor
- 4 x BO Wheel
- 1 x HC-SR04 Ultrasonic Sensor
- 1 x Towerpro SG90 Mini Servo Motor
1602 LCD Board Keypad Shield with Blue Backlight
Specifications:
- Display: 16x2 LCD display
- Backlight: Blue backlight
- Input: Keypad for user input
- Compatibility: Compatible with Arduino Uno, Mega, Leonardo, and other compatible boards
- Mounting: Easy to mount on Arduino board
Package Includes:
1 x LCD Display 1602 Board Keypad Shield with Blue Backlight
1602 LCD Display with I2C/IIC Serial Interface Adapter Module
Specifications:
- Display Type: Alphanumeric
- Display Size: 16 characters x 2 lines
- Interface: I2C
- Compatibility: Arduino, Raspberry Pi, ESP8266
- Dimensions: (L x W x H) 80mm x 36mm x 12mm
- Weight: 20g
- Operating Voltage: 5V
- Backlight: Yellow
Package Includes:
1 x LCD 16x2 1602 Alphanumeric Display Yellow 1 x I2C Module Adapter
40 Pin Dupont Male to Male Jumper Wire, 40 Pieces
PRODUCT OVERVIEW:
- 40P color DuPont line
- Weight: 45 gm
- Compatible with 2.54mm spacing pin headers
- 40pcs chromatic male to male color jumper wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
Jumper Wires M-M, M-F, F-F, 20cm, 120 Pieces
PRODUCT OVERVIEW
- 40P color DuPont line
- Length: 300mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 120 pcs chromatic color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
- 1 x 40 pcs Male to Male jumper wire set
- 1 x 40 pcs Male to Female jumper wire set
- 1 x 40 pcs Female to Female jumper wire set
BO Motor, BO Wheel & Arduino UNO R3 with Jumper Wires 60 Pcs
Product Overview:
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 40P color DuPont line
- Length: 300mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 60 pcs chromatic color jumper wire
- High quality and in good working condition
- Durable and reusable
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
- 1 x 20 pcs Male to Male jumper wire set
- 1 x 20 pcs Male to Female jumper wire set
- 1 x 20 pcs Female to Female jumper wire set
- 4 x BO Motor
- 4 x BO Wheel
DC Dual Shaft BO Motor & Wheel with SG90 Motor and Ultrasonic Sensor
PRODUCT OVERVIEW
- Operating Voltage 3V - 12V DC
- RPM Approximately 150 RPM
- No load current 40 - 80 mA
- Output Torque 3.5 kgf.cm
- High quality plastic wheel and BO-series motor
- Plastic Wheels with a slot that matches BO Motor Shaft are made to work with BO motors both Series I and II.
- 66mm diameter, 20mm width
- Operating Voltage: 5 V
- Sonar Sensing Range: 2-400 cm
- Max. Sensing Range: 450 cm
- Frequency: 40 kHz
- Operating voltage: 3.0V~ 7.2V
- Stall torque @4.8V : 1.2kg-cm
- Stall torque @6.6V: 1.6kg-
- 4 x BO Motor
- 4 x BO Wheel
- 1 x HC-SR04 Ultrasonic Sensor
- 1 x Towerpro SG90 Mini Servo Motor
2.4 inch TFT LCD Display Shield for Arduino Uno
Specifications:
- Display Type: 2.4" diagonal Touch LCD TFT
- Resolution: 240×320 pixels
- Color Depth: 18-bit (262,000 colors)
- Voltage Compatibility: 5V compatible, use with 3.3V or 5V logic
- MicroSD Card Slot: Included for additional storage options
- Compatibility: Works with Arduino Uno and Mega-compatible boards
Package Includes:
1 x 2.4 inch TFT LCD Display Shield for Arduino UNO Mega, 1 x Stylus Pen
16×2 LCD Display with Blue Backlight for 8051, AVR, PIC, ARM
Specifications:
- Display: 16 characters x 2 lines
- Display Type: Liquid Crystal Display (LCD)
- Backlight: Blue
- Interface: Parallel
- Compatibility: Arduino, 8051, AVR, PIC, ARM, and more
- Operating Voltage: 5V
- Operating Temperature: -20°C to 70°C