Continue shopping “LDR Sensor LM393 Photosensitive Light Dependent Sensor” has been added to your cart.
You may be interested in…
Arduino Uno SMD Development Microcontroller Board With Cable
Specifications:
- Microcontroller: ATmega328P SMD
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- Flash Memory: 32 KB (ATmega328P), of which the bootloader uses 0.5 KB
- SRAM: 2 KB (ATmega328P)
- EEPROM: 1 KB (ATmega328P)
- Clock Speed: 16 MHz
- Length: 68.6 mm
- Width: 53.4 mm
- Weight: 25 g
- USB Interface: CH340G
- Compatible with the Arduino Uno platform
Package Includes:
1 x Arduino Uno R3 Development Microcontroller Board SMD Version 1 x USB Cable
1602 LCD Board Keypad Shield with Blue Backlight
Specifications:
- Display: 16x2 LCD display
- Backlight: Blue backlight
- Input: Keypad for user input
- Compatibility: Compatible with Arduino Uno, Mega, Leonardo, and other compatible boards
- Mounting: Easy to mount on Arduino board
Package Includes:
1 x LCD Display 1602 Board Keypad Shield with Blue Backlight
40 Pin Dupont Male to Female Jumper Wire, 40 Pieces
PRODUCT OVERVIEW:
- 40 P color DuPont line
- Weight: 45 gm
- Compatible with 2.54mm spacing pin headers
- 40 pcs chromatic male to female color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
40 Pin Dupont Male to Male Jumper Wire, 40 Pieces
PRODUCT OVERVIEW:
- 40P color DuPont line
- Weight: 45 gm
- Compatible with 2.54mm spacing pin headers
- 40pcs chromatic male to male color jumper wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver
Specifications:
- Stepper Motor Model: 28BYJ-48
- Stepper Motor Driver Model: ULN2003
- Voltage: 5V DC
- Step Angle: 5.625°/64
- Reduction Ratio: 1/64
- Diameter: 28mm
- Voltage: 5V
- Phase: 4
- Current: 0.1A
- Resistance: 50Ω
- Motor Length: 34mm
- Weight: 30g
Package Includes:
1 x 28BYJ-48 Stepper Motor 1 x ULN2003 Stepper Motor Driver Module
PWM Controller 1203B PWM DC Motor Speed Regulator
Specifications:
- Model: 1203B
- Input Voltage: DC 6V-28V
- Output Current: 3A (Max)
- PWM Duty Cycle: 0%-100%
- Control Method: Potentiometer
- Operating Temperature: -20°C to 40°C
- Dimensions: 6.8cm x 3.6cm x 2.2cm
- Weight: 40g
- Compatibility: PWM on Arduino
- Application: DC Motor Speed Control
Package Includes:
1 x 1203B PWM DC Motor Speed Regulator
2.4 inch TFT LCD Display Shield for Arduino Uno
Specifications:
- Display Type: 2.4" diagonal Touch LCD TFT
- Resolution: 240Ă—320 pixels
- Color Depth: 18-bit (262,000 colors)
- Voltage Compatibility: 5V compatible, use with 3.3V or 5V logic
- MicroSD Card Slot: Included for additional storage options
- Compatibility: Works with Arduino Uno and Mega-compatible boards
Package Includes:
1 x 2.4 inch TFT LCD Display Shield for Arduino UNO Mega, 1 x Stylus Pen
Arduino Uno R3 with Jumper Wires 120 Pcs
PRODUCT OVERVIEW
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 40P color DuPont line
- Length: 300mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 120 pcs chromatic color jump wire
- High quality and in good working condition
- Durable and reusable
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
- 1 x 40 pcs Male to Male jumper wire set
- 1 x 40 pcs Male to Female jumper wire set
- 1 x 40 pcs Female to Female jumper wire set
Ultrasonic Sensor with SG90 Motor and 10 pcs M-F Jumper Wire
PRODUCT OVERVIEW
- Ultrasonic Operating Voltage(VDC): 3.2 – 5.2
- SG90 Operating Voltage: 3.0 – 7.2V
- Ultrasonic weight (gm): 10
- SG90 weight (gm): 9
- Ultrasonic Measurement Range: 3cm to 350Cm
- SG90 Rotational Degree: 180
- Jumper Wire Compatible with 2.54mm spacing pin headers
- Jumper Wire Durable and reusable
- 1 x Ultrasonic Sensor HC-SR04
- 1 x TowerPro SG90 Servo Motor with Cable
- 1 x Set of Horns
- 1 x Set of Screws
- 1 x 10Pcs Male to Female Jumper Wire
Arduino UNO R3 and Ultrasonic Sensor with SG90 Motor and Jumper Wires
Specifications:
- Ultrasonic Operating Voltage: 3.2 – 5.2 VDC
- SG90 Operating Voltage: 3.0 – 7.2V
- Ultrasonic sensor weight: 10 gm
- SG90 weight: 9 gm
- Ultrasonic Measurement Range: 3cm to 350 cm
- SG90 Rotational Degree: 180
- Jumper Wire Compatible with 2.54mm spacing pin headers
- Jumper Wire is Durable and reusable
- Microcontroller: ATmega328
- Arduino Uno Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
Package Includes:
- 1 x Ultrasonic Sensor HC-SR04
- 1 x TowerPro SG90 Servo Motor with Cable
- 1 x SG90 Set of Horns
- 1 x SG90 Set of Screws
- 1 x 40 pcs Male to Male jumper wire set
- 1 x 40 pcs Male to Female jumper wire set
- 1 x 40 pcs Female to Female jumper wire set
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
IR Sensor Module – Infrared Obstacle Avoidance Sensor
Specifications:
- Model: IR Sensor Module
- Type: Infrared Obstacle Avoidance Sensor
- Operating Voltage: 3.3V - 5V
- Detection Range: Adjustable, up to 20-30cm
- Detection Angle: Approximately 35 degrees
- Output Type: Digital Signal (0 or 1)
- Response Time: < 2ms
- Operating Temperature: -10°C to +50°C
- Dimensions: 3.2cm x 1.4cm x 0.5cm
- Compatibility: Compatible with Arduino, Raspberry Pi, and other microcontrollers
- Key Features: Adjustable sensitivity, easy to integrate, low power consumption
- Applications: Robotics, automation, industrial equipment, proximity sensing
Package Includes:
1 x IR Sensor Module
NodeMCU ESP8266 V3 Lua CH340 Wi-Fi Development Board
Specifications:
- NodeMCU ESP8266 V3 with CH340 chipset.
- Microcontroller: ESP8266
- USB-to-Serial Converter: CH340
- WiFi Connectivity: 802.11 b/g/n at 2.4GHz
- Security Protocols: Supports WPA/WPA2
- Operating Modes: STA/AP/STA+AP
- Programming: Supports programming via Lua script or Arduino IDE
- Flash Memory: 4MByte
Package Includes:
1 x NodeMCU ESP8266 V3 Lua CH340 WiFi Development Board
Dual Shaft BO Motor & Wheel (Set of 4) & Arduino UNO R3
PRODUCT OVERVIEW
- Operating Voltage 3V - 12V DC
- RPM Approximately 150 RPM
- No-load current 40 - 80 mA
- Output Torque 3.5 kg-cm
- High-quality plastic wheel and BO-series motor
- Plastic Wheels with a slot that matches BO Motor Shaft are made to work with BO motors in both Series I and II.
- 66mm diameter, 20mm width
- Operating Voltage: 5 V
- Sonar Sensing Range: 2-400 cm
- Max. Sensing Range: 450 cm
- Frequency: 40 kHz
- Operating voltage: 3.0V~ 7.2V
- Stall torque @4.8V : 1.2kg-cm
- Stall torque @6.6V: 1.6kg
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 4 x BO Motor
- 4 x BO Wheel
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
8 Channel Relay Board 5V Expansion Module with Optocoupler
Specifications:
- Product Name: 8 Channel Relay Board
- Voltage Compatibility: 5V (DC)
- Relay Type: Electromagnetic Relay
- Operating Temperature: -40°C to +85°C
- Input Voltage: 5V DC (Operating)
- Input Voltage Range: 3.3V to 12V DC
- Trigger Input Voltage: 0V (Low-Level Trigger) to VCC (High-Level Trigger)
Package Includes:
1 x 8 Channel Relay Module
NodeMCU ESP32 WiFi Development Board with LWIP Protocol
Specifications:
- Chipset: ESP32
- Processor: Dual-core Tensilica LX6 microprocessor
- Connectivity: WiFi (802.11 b/g/n), Bluetooth (v4.2 and BLE)
- Operating Voltage: 3.3V
- Digital I/O Pins: 28
- Analog Input Pins: 6
- UART Interfaces: 3
- SPI Interfaces: 4
- I2C Interfaces: 2
- Flash Memory: 4MB
- RAM: 520KB SRAM
- Clock Speed: 240MHz
- Dimensions: 58mm x 85mm x 40mm
- Weight: 120g
Package Includes:
1 x NodeMCU ESP32 WiFi Development Board
BO Motor, BO Wheel & Arduino UNO R3 with Jumper Wires 60 Pcs
Product Overview:
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 40P color DuPont line
- Length: 300mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 60 pcs chromatic color jumper wire
- High quality and in good working condition
- Durable and reusable
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
- 1 x 20 pcs Male to Male jumper wire set
- 1 x 20 pcs Male to Female jumper wire set
- 1 x 20 pcs Female to Female jumper wire set
- 4 x BO Motor
- 4 x BO Wheel
Arduino Uno R3 with L293D Motor Driver
PRODUCT OVERVIEW:-
- Experience the power of Arduino Uno R3 combined with L293D motor driver shield for seamless motor control.
- Microcontroller ATmega328P With Operating Voltage : 5V
- Benefit from the ATmega328P microcontroller's abundant memory for program and data storage.
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Precisely control motors with the L293D shield's two H-bridge output channels.
- Optimize performance with a dual power supply configuration for both Arduino Uno R3 and motors.
- Explore a wide range of applications, including robotics, home automation, and motor-driven projects.
- Rely on the proven reliability and robustness of this widely used combination trusted by hobbyists, enthusiasts, and professionals.
- Expand project possibilities with compatibility with various sensors, actuators, and components.
Package Includes:
- 1 x Arduino Uno R3 with Cable
- 1 x L293D Motor Driver Shield
1602 LCD Display with I2C/IIC Serial Interface Adapter Module
Specifications:
- Display Type: Alphanumeric
- Display Size: 16 characters x 2 lines
- Interface: I2C
- Compatibility: Arduino, Raspberry Pi, ESP8266
- Dimensions: (L x W x H) 80mm x 36mm x 12mm
- Weight: 20g
- Operating Voltage: 5V
- Backlight: Yellow