Continue shopping “FlySky FS-i6 2.4G 6CH RC Transmitter with Receiver FS-iA6B” has been added to your cart.
Cart totals
| Subtotal | ₹7,194.00 |
|---|---|
| Shipping |
Shipping to Madhya Pradesh. |
| Total | ₹7,194.00 |
You may be interested in…
Arduino Uno R3 With Jumper Wires 60 Pieces
Product Overview:
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 40P color DuPont line
- Length: 300mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 120 pcs chromatic color jump wire
- High quality and in good working condition
- Durable and reusable
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
- 1 x 20 pcs Male to Male jumper wire set
- 1 x 20 pcs Male to Female jumper wire set
- 1 x 20 pcs Female to Female jumper wire set
MB102 830 Points Breadboard with 65Pcs Jumper Wires
Specifications:
- Breadboard Model: MB102
- Total Points: 830
- Jumper Wires Included: 65 pieces
- Jumper Wire Lengths: Various lengths for flexible connections
- Jumper Wire Colors: Assorted colors for easy organization
- Compatibility: Suitable for use with a wide range of electronic components
- Material: High-quality plastic for durability
- Dimensions: Compact size for easy storage and transport
- Usage: Ideal for prototyping and testing electronic circuits without soldering
Package Includes:
- 1 x MB102 830 Points Solderless Prototype PCB Breadboard
- 1 x 65 Male to Male Jumper Wires
DC Water Pump – Micro DC 3-6V Submersible Mini Water Pump
PRODUCT OVERVIEW
- Mini pump, delicate and light, very perfect for an experiment, aquarium, fish tank, and fountain, etc.
- DC 3v to 6v submersible pump
- Micro mini submersible water pump 3v to 6v
- DC water pump for DIY
- DC pumps for the HOBBY kit.
1400KV Brushless Motor With Soldered Bullet Connector (Set of 4)
Specifications:
- Model: A2212
- KV: 1400
- Motor Type: Brushless DC (BLDC)
- Number of Motors: 4
- Connector Type: Soldered bullet connectors
- Compatible With: Quadcopters, hexacopters, octocopters
- Recommended Propeller Size: 8 to 10 inches
- Weight: Approximately 50g per motor
- Dimensions: 27.5mm x 27mm x 27mm
- Operating Voltage: 7.4V to 11.1V
- Maximum Continuous Current: 12A
- Maximum Continuous Power: 120W
- Shaft Diameter: 3.17mm
- Shaft Length: 12mm
- Mounting Hole Spacing: 16mm x 19mm
- Motor Wire Length: Approximately 150mm
Package Includes:
- 1 x A2212 1400Kv Brushless Motor for Drone
- 1 x Prop Adapter
- A Motor Holder (X-type) and a set of screws
8 Channel Relay Board 5V Expansion Module with Optocoupler
Specifications:
- Product Name: 8 Channel Relay Board
- Voltage Compatibility: 5V (DC)
- Relay Type: Electromagnetic Relay
- Operating Temperature: -40°C to +85°C
- Input Voltage: 5V DC (Operating)
- Input Voltage Range: 3.3V to 12V DC
- Trigger Input Voltage: 0V (Low-Level Trigger) to VCC (High-Level Trigger)
Package Includes:
1 x 8 Channel Relay Module
Arduino Nano Soldered V3 Board Compatible with Arduino
Specifications:
- Compatibility: Compatible with Arduino Nano V3
- Pins: Pre-soldered for easy connection
- Microcontroller: ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limit): 6-20V
- Flash Memory: 32KB (ATmega328), of which 2KB used by the bootloader
- SRAM: 2KB (ATmega328)
- EEPROM: 1KB (ATmega328)
- Clock Speed: 16MHz
- Dimensions: 18.5 x 43.2 mm
- Weight: 7g
Package Includes:
1 x Arduino Nano V3 Soldered ATMEGA328 Compatible Board
Arduino Uno SMD Development Microcontroller Board With Cable
Specifications:
- Microcontroller: ATmega328P SMD
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- Flash Memory: 32 KB (ATmega328P), of which the bootloader uses 0.5 KB
- SRAM: 2 KB (ATmega328P)
- EEPROM: 1 KB (ATmega328P)
- Clock Speed: 16 MHz
- Length: 68.6 mm
- Width: 53.4 mm
- Weight: 25 g
- USB Interface: CH340G
- Compatible with the Arduino Uno platform
Package Includes:
1 x Arduino Uno R3 Development Microcontroller Board SMD Version 1 x USB Cable
1602 LCD Display with I2C/IIC Serial Interface Adapter Module
Specifications:
- Display Type: Alphanumeric
- Display Size: 16 characters x 2 lines
- Interface: I2C
- Compatibility: Arduino, Raspberry Pi, ESP8266
- Dimensions: (L x W x H) 80mm x 36mm x 12mm
- Weight: 20g
- Operating Voltage: 5V
- Backlight: Yellow
Package Includes:
1 x LCD 16x2 1602 Alphanumeric Display Yellow 1 x I2C Module Adapter
1000KV BLDC Motor A2212 With Soldered Bullet Connector
Specifications:
- Model: A2212
- KV Rating: 1000KV
- Type: Brushless
- Connector: Soldered Bullet Connector
- Weight: 47g
- Shaft Diameter: 3.17mm
- Motor Dimensions: 27.5 x 27mm
- Recommended Voltage: 11.1V
- Maximum Continuous Current: 13A
- Maximum Continuous Power: 143W
- Maximum Efficiency Current: 4-10A (75%)
- Internal Resistance: 0.105 ohms
- Recommended Propeller Size: 8-10 inches
- Wire Length: 150mm
Package Includes:
- 1 x 1000Kv Brushless Motor for Drone
- 1 x Prop Adapter
- A Motor Holder (X-type) and a set of screws
BO Motor with BO Wheel and L293D Motor Driver Module
Specifications:
- Motor Type: BO Motor
- Quantity: 4 Motors
- Wheel Type: BO Wheel
- Motor Driver: L293D
- Ideal For: Robotics, DIY Projects
- Compatibility: Compatible with a wide range of projects
- Control: Speed and direction control for each motor
- Ease of Use: Easy to assemble and use
- Application: Suitable for RC cars, robots, and other motorized projects
Package Includes:
4 x DC BO Motors 4 x BO Wheels 1 x L293D Motor Driver
Arduino Nano V3 Soldered Board with USB Cable
Specifications:
- Microcontroller: ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limit): 6-20V
- Digital I/O Pins: 14 (6 of which are PWM)
- Analog Input Pins: 8
- Flash Memory: 32 KB (2 KB used by bootloader)
- SRAM: 2 KB
- EEPROM: 1 KB
- Clock Speed: 16 MHz
- Dimensions: 1.85 cm x 4.32 cm
- Weight: Approximately 7g
Package Includes:
1 x Nano Soldered V3 Board 1 x USB Cable
L298N Motor Driver Module with PWM Control
PRODUCT OVERVIEW
- Driver chip: L298 dual H-bridge driver chip.
- Operates up to 35V DC.
- Drive part of the peak current Io: 2A / Bridge.
- The logical part of the terminal power supply range Vss:4.5V-5.5V
- The logical part of the operating current range: 0 ~ 36mA.
- Maximum power consumption: 20W.
- Current Sense for each motor.
- Heatsink for better performance.
- Power-On LED indicator.
- Drives up to 4 motors.
Arduino UNO R3 & Ultrasonic Sensor With SG90 Motor and Jumper Wires
PRODUCT OVERVIEW
- Ultrasonic Operating Voltage(VDC): 3.2 – 5.2
- SG90 Operating Voltage: 3.0 – 7.2V
- Ultrasonic weight (gm): 10
- SG90 weight (gm): 9
- Ultrasonic Measurement Range: 3cm to 350Cm
- SG90 Rotational Degree: 180
- Jumper Wire Compatible with 2.54mm spacing pin headers
- Jumper Wire Durable and reusable
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 1 x Ultrasonic Sensor HC-SR04
- 1 x TowerPro SG90 Servo Motor with Cable
- 1 x SG90 Set of Horns
- 1 x SG90 Set of Screws
- 1 x 40 pcs Male to Male jumper wire set
- 1 x 40 pcs Male to Female jumper wire set
- 1 x 40 pcs Female to Female jumper wire set
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
Arduino D1 Mini V2 Mini NodeMCU Development Board
Specifications:
- Microcontroller: ESP8266
- Operating Voltage: 3.3V
- Digital I/O Pins: 11
- Analog Input Pins: 1 (3.2V max input)
- Flash Memory: 4 MB
- Clock Speed: 80 MHz
- WiFi: 802.11 b/g/n
- Dimensions: 34.2mm x 25.6mm
- Lua scripting support
Package Includes:
1 x Arduino D1 Mini V2 Mini NodeMCU Development Board
Battery Tester 1-8S Lipo Battery Voltage Tester
Specifications:
- Compatibility: 1-8S lipo batteries
- Voltage Measurement Range: 3.7V-30V
- Voltage Display Resolution: 0.01V
- Voltage Display Accuracy: ±0.03V
- Operating Temperature: -10°C to 50°C
- Display: LED screen
- Dimensions: 40mm x 25mm x 10mm
- Weight: 10g
- Features: Overvoltage and undervoltage alarm, low voltage alarm, reverse polarity protection
Package Includes:
1 x Battery Tester 1-8S Lipo Battery Voltage Tester
28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver
Specifications:
- Stepper Motor Model: 28BYJ-48
- Stepper Motor Driver Model: ULN2003
- Voltage: 5V DC
- Step Angle: 5.625°/64
- Reduction Ratio: 1/64
- Diameter: 28mm
- Voltage: 5V
- Phase: 4
- Current: 0.1A
- Resistance: 50Ω
- Motor Length: 34mm
- Weight: 30g
Package Includes:
1 x 28BYJ-48 Stepper Motor 1 x ULN2003 Stepper Motor Driver Module
Jumper Wires M-M, M-F, F-F, 20cm, 120 Pieces
PRODUCT OVERVIEW
- 40P color DuPont line
- Length: 300mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 120 pcs chromatic color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
- 1 x 40 pcs Male to Male jumper wire set
- 1 x 40 pcs Male to Female jumper wire set
- 1 x 40 pcs Female to Female jumper wire set
30A ESC Electronic Speed Controller With Dean Connector
Specifications:
- Voltage Range: 7.4V - 14.8V
- Continuous Current: 30A
- BEC Output: 5V/2A
- Input Connector: Dean Connector
- Output Connector: 3.5mm bullet connectors
- Dimensions: 45mm x 25mm x 10mm
- Weight: 25g (including wires)
- Compatibility: Suitable for RC cars, boats, drones, and other vehicles
- Color: Yellow casing for easy identification
- Quantity: Set of 4 ESCs
Package Includes:
4 x ESC 30A Simonk Electronic Speed Controller with Connectors.
NEO 6M GPS Module Geographic Positioning System with EPROM
Specifications:
- Product Name: NEO 6M GPS Module with EPROM
- Chipset: ublox NEO-6M
- Compatibility: Arduino, Raspberry Pi, and other microcontroller platforms
- Satellite Systems: GPS, GLONASS, BeiDou
- Memory: EPROM for configuration storage
- Interfaces: UART serial interface
- Operating Voltage: 3.3V - 5V
- Operating Current: 45mA
- Operating Temperature: -40°C to +85°C
- Antenna: Ceramic patch antenna with LNA
- Position Accuracy: 2.5m CEP (Circular Error Probable)
- Update Rate: Up to 5Hz
- Dimensions: 25mm x 35mm
- Weight: 50g
Package Includes:
1 x NEO-6M GPS Board 1 x Detachable Antenna
A2212 1000KV BLDC Motor With Soldered Bullet Connector (Set of 4)
PRODUCT OVERVIEW
- Motor KV: 1000
- Current Capacity: 12A/60S
- LiPO Batteries: 2S-3S
- Efficiency Current: 4-10A
- Shaft Diameter: 3.17 mm
- Prop Adapter is quality tested before shipping to customers.
- 4 x A2212 1000Kv Brushless Motor for Drone
- 4 x Prop Adapter
- A Motor Holder (X-type) and set of screws
NodeMCU ESP32 WiFi Development Board with LWIP Protocol
Specifications:
- Chipset: ESP32
- Processor: Dual-core Tensilica LX6 microprocessor
- Connectivity: WiFi (802.11 b/g/n), Bluetooth (v4.2 and BLE)
- Operating Voltage: 3.3V
- Digital I/O Pins: 28
- Analog Input Pins: 6
- UART Interfaces: 3
- SPI Interfaces: 4
- I2C Interfaces: 2
- Flash Memory: 4MB
- RAM: 520KB SRAM
- Clock Speed: 240MHz
- Dimensions: 58mm x 85mm x 40mm
- Weight: 120g
Package Includes:
1 x NodeMCU ESP32 WiFi Development Board
BO Motor 12V DC Dual Shaft 100 RPM Motor – Straight
Specifications:
- Motor Type: DC
- Operating Voltage: 3 ~ 12 VDC
- No Load Current: 40-180mA
- Shaft Type: Dual Shaft
- Shaft Length: 8.5 mm
- Shaft Diameter: 5.5 mm
- Speed: 100 RPM
- Rated Torque: 1Kg-Cm
- Application: Robotics, Automation
- Dimensions (LxWxH): 64 x 22 x 18 mm
- Weight: 30 g
Package Includes:
1 x BO Motor 12V DC Dual Shaft 100 RPM Motor - Straight
Unsoldered Nano V3.0 ATmega328P Compatible with Arduino
Specifications:
- Microcontroller: ATmega328P
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 8
- DC Current per I/O Pin: 40 mA
- Flash Memory: 32 KB (ATmega328P), of which the bootloader uses 0.5 KB
- SRAM: 2 KB (ATmega328P)
- EEPROM: 1 KB (ATmega328P)
- Clock Speed: 16 MHz
- Dimensions: 18.5mm x 43.2mm
- Weight: 5g
Package Includes:
1 x Arduino Nano Unsoldered V3 ATmega328P CH340 Chip
Solderless Breadboard MB102 830 Points PCB Breadboard
Specifications:
- Model: MB102
- Points: 830
- Construction: PCB board
- Features: Solderless breadboard, reusable
- Dimensions: Standard breadboard size
- Compatibility: Suitable for various electronic components
- Application: Ideal for prototyping and testing circuits
- Quality: High-quality construction for durability
- Ease of Use: No soldering is required
- Versatility: Suitable for beginners and professionals
- Portable: Compact size for easy transportation
- Brand: High-quality brand known for electronics products
Package Includes:
1 x MB102 830 Points Solderless Prototype PCB Breadboard
Arduino Uno R3 with Jumper Wires 120 Pcs
PRODUCT OVERVIEW
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 40P color DuPont line
- Length: 300mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 120 pcs chromatic color jump wire
- High quality and in good working condition
- Durable and reusable
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
- 1 x 40 pcs Male to Male jumper wire set
- 1 x 40 pcs Male to Female jumper wire set
- 1 x 40 pcs Female to Female jumper wire set
400 Point Breadboard Half Size Solderless Breadboard
Specifications:
- 400-point breadboard for prototyping circuits
- Half-size design for portability and convenience
- No soldering is required for easy circuit assembly
- Compatible with a wide range of electronic components
- Durable construction for long-lasting performance
- Ideal for hobbyists, students, and professionals
Package Includes:
1 x 400 Point Breadboard Half Size Solderless Breadboard
Servo Tester 3Ch Digital Multi Servo Tester ESC RC Consistency
Specifications:
- Channels: 3
- Input Voltage: 4.8-6.0V
- Operating Voltage: DC 4.8-6V
- Output Signal: 1.5ms±0.5ms
- Material: Plastic
- Size: 48mm x 42mm x 17mm
- Weight: 31g
- Compatible with: servo motors and electronic speed controllers (ESCs)
- Easy-to-use controls for adjusting settings
- Compact and lightweight design for portability
- Durable construction for long-lasting use
- Ideal for hobbyists and professionals alike
- Application: Ideal for testing and troubleshooting servo motors and ESCs in RC vehicles
Package Includes:
1 x Servo Tester 3Ch Digital Multi Servo Tester ESC RC Consistency
NodeMCU ESP8266 V3 Lua CH340 Wi-Fi Development Board
Specifications:
- NodeMCU ESP8266 V3 with CH340 chipset.
- Microcontroller: ESP8266
- USB-to-Serial Converter: CH340
- WiFi Connectivity: 802.11 b/g/n at 2.4GHz
- Security Protocols: Supports WPA/WPA2
- Operating Modes: STA/AP/STA+AP
- Programming: Supports programming via Lua script or Arduino IDE
- Flash Memory: 4MByte