MQ5 Sensor Methane LPG Liquid Propane Gas Sensor Module
Specifications:
- Model: MQ-5
- Sensor Type: MQ5 Gas Sensor
- Detectable Gases: Methane, LPG, Liquid Propane Gas
- Operating Voltage: 5V DC
- Interface: Analog and Digital
- Response Time: ≤ 10 seconds
- Preheat Time: ≥ 24 hours
- Sensitivity: Adjustable via onboard potentiometer
- Output Signal: Analog (0-5V) and Digital (0V/5V)
- Operating Temperature: -20°C to 40°C
- Operating Humidity: 95% RH
- Dimensions: 32mm x 20mm x 22mm
- Weight: 7 g
Package Includes:
1 x MQ-5 Methane LPG Liquid Propane Gas Sensor ModuleMQ6 Liquefied Petroleum Isobutane Propane Gas Sensor Module
Specifications:
- Model: MQ-6
- Sensor Type: MQ6 Gas Sensor
- Operating Voltage: 5V DC
- Detecting Range: 200-10000 PPM
- Operating Temperature: -20 to 40 °C
- Opt. Relative Humidity: <95%
- Output: Analog
- Detection Range: Adjustable
- Sensitivity: High
- Gas Detected: Liquefied Petroleum Gas (LPG), Propane, Isobutane
- Response Time: Quick
- Dimensions: 32 x 20 x 22 mm
- Weight: 7 g
Package Includes:
1 x MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor ModuleNano Board Unsoldered with USB Cable for Arduino
Specifications:
- Microcontroller: ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 14 (6 provide PWM output)
- Analog Input Pins: 8
- SRAM: 2 KB (ATmega328)
- EEPROM: 1 KB (ATmega328)
- Clock Speed: 16 MHz
- USB Chip: CH340G
- Dimensions: 45mm x 18mm
- Weight: 7g
Package Includes:
1 x Nano Board R3 CH340 Chip 1 x USB Mini CableNEO 6M GPS Module Geographic Positioning System with EPROM
Specifications:
- Product Name: NEO 6M GPS Module with EPROM
- Chipset: ublox NEO-6M
- Compatibility: Arduino, Raspberry Pi, and other microcontroller platforms
- Satellite Systems: GPS, GLONASS, BeiDou
- Memory: EPROM for configuration storage
- Interfaces: UART serial interface
- Operating Voltage: 3.3V - 5V
- Operating Current: 45mA
- Operating Temperature: -40°C to +85°C
- Antenna: Ceramic patch antenna with LNA
- Position Accuracy: 2.5m CEP (Circular Error Probable)
- Update Rate: Up to 5Hz
- Dimensions: 25mm x 35mm
- Weight: 50g
Package Includes:
1 x NEO-6M GPS Board 1 x Detachable AntennaNodeMCU ESP8266 CP2102 Board – IoT Development Board
NodeMCU ESP8266 D1 R2 WiFi UNO Based Development Board
Specifications:
- Microcontroller: ESP8266
- Operating Voltage: 3.3V
- Digital I/O Pins: 11
- Analog Input Pins: 1 (Max input: 3.2V)
- Clock Speed: 80MHz/160MHz
- Flash Memory: 4MB
- WiFi: 802.11 b/g/n
- USB-TTL Converter: CH340G
- Compatibility: Arduino IDE, NodeMCU, Lua, MicroPython
- Dimensions: 70mm x 54mm
- Weight: 30g
Package Includes:
1 x NodeMCU ESP8266 D1 R2 WiFi UNO Development BoardNodeMCU ESP8266 V3 Lua CH340 Wi-Fi Development Board
Specifications:
- NodeMCU ESP8266 V3 with CH340 chipset.
- Microcontroller: ESP8266
- USB-to-Serial Converter: CH340
- WiFi Connectivity: 802.11 b/g/n at 2.4GHz
- Security Protocols: Supports WPA/WPA2
- Operating Modes: STA/AP/STA+AP
- Programming: Supports programming via Lua script or Arduino IDE
- Flash Memory: 4MByte
Package Includes:
1 x NodeMCU ESP8266 V3 Lua CH340 WiFi Development BoardNRF24L01 Module – 2.4GHz Wireless Transceiver
PIR Sensor HC-SR501 Motion Detector Pyroelectric Infrared Module
Specifications:
- Model: PIR HC-SR501
- Operating Voltage: 4.5 ~ 20 VDC
- Current Consumption: 0.06 mA
- Detection Range: Up to 7 meters
- Detection Angle: <140°
- Output Signal: High (3.3V) when motion is detected, Low (0V) when no motion is detected
- Time Delay Adjustment: 5 to 200 seconds
- Trigger Mode: Repeatable (default) or Non-repeatable (jumper selectable)
- Compatibility: NodeMCU ESP8266, RTC Module, Ultrasonic Sensor
- Features: Passive Infrared Sensor, PIR detector, Low Power Consumption
- Applications: Security Systems, Lighting Controls, Motion-Activated Devices, Home Automation
- Dimensions: 32mm x 24mm x 25mm
- Weight: 10g