PWM Controller 1203B PWM DC Motor Speed Regulator
Specifications:
- Model: 1203B
- Input Voltage: DC 6V-28V
- Output Current: 3A (Max)
- PWM Duty Cycle: 0%-100%
- Control Method: Potentiometer
- Operating Temperature: -20°C to 40°C
- Dimensions: 6.8cm x 3.6cm x 2.2cm
- Weight: 40g
- Compatibility: PWM on Arduino
- Application: DC Motor Speed Control
Package Includes:
1 x 1203B PWM DC Motor Speed RegulatorRain Sensor Raindrops Detection Sensor Humidity Sensor
Specifications:
- Operating Voltage: 3.3V - 5V
- Detection Area: 20mm x 20mm
- Operating Current: < 20mA
- Output Signal: Digital (0 or 1)
- Driver Size(mm): 32x15x9 (LxWxH)
- Collector Board Size(mm): 54x40x1.5 (LxWxH)
- Mounting Holes Diameter: 3mm
- Operating Temperature: -25°C to 85°C
- Operating Humidity: 5% to 95% RH
- Output Interface: 3-pin (VCC, GND, OUT)
- Wire Length: 20cm
- Weight: 5g
Package Includes:
1 x Printed Circuit Board for Rain Water Collection 1 x Control Board with LM393 Voltage Comparator 5 x Female to Female Jumper Wires Dupont CableRFID Sensor Module RC522 for Secure and Efficient Card Reading
Specifications of RFID Sensor RC522:
- Integrated MF RC522 chip for efficient RFID reading
- Operates at 13.56MHz for high-speed communication
- Low-voltage, cost-effective, compact design
- Non-contact card chip with up to 60mm reading distance
- Supports SPI protocol for easy CPU integration
- Ideal for smart meters, handheld devices, access control
- 1 x RFID-RC522 Reader/Writer Module
- 1 x Standard blank RFID card
- 1 x Straight header strip
- 1 x Right-angle header strip
- 1 x Special-shaped key-chain RFID tag
Servo Tester 3Ch Digital Multi Servo Tester ESC RC Consistency
Specifications:
- Channels: 3
- Input Voltage: 4.8-6.0V
- Operating Voltage: DC 4.8-6V
- Output Signal: 1.5ms±0.5ms
- Material: Plastic
- Size: 48mm x 42mm x 17mm
- Weight: 31g
- Compatible with: servo motors and electronic speed controllers (ESCs)
- Easy-to-use controls for adjusting settings
- Compact and lightweight design for portability
- Durable construction for long-lasting use
- Ideal for hobbyists and professionals alike
- Application: Ideal for testing and troubleshooting servo motors and ESCs in RC vehicles
Package Includes:
1 x Servo Tester 3Ch Digital Multi Servo Tester ESC RC ConsistencySG90 Motor with Servo Tester Consistency Speed Controller
Specifications:
- Product Name: SG90 Motor with Servo Tester
- Model: SG90
- Servo Type: Micro
- Model Series: SG Series
- Operating Voltage: 4.8 - 6.0V
- No-load Speed: 0.12sec/60 degrees (4.8V), 0.10sec/60 degrees (6.0V)
- Stall Torque: 1.2 - 1.6kg/cm (4.8V), 1.6 - 2.0kg/cm (6.0V)
- Temperature Range: -30°C to +60°C
- Dimensions: 23 x 12.2 x 29 mm
- Weight: 17g
Package Includes:
1 x TowerPro SG90 Mini Servo Motor 1 x Digital Multi Servo TesterSIM800L GSM Module TTL Serial Port Micro SIM Card Core Board
Soil Moisture Sensor with Digital Output Soil Hygrometer
Solderless Breadboard MB102 830 Points PCB Breadboard
Specifications:
- Model: MB102
- Points: 830
- Construction: PCB board
- Features: Solderless breadboard, reusable
- Dimensions: Standard breadboard size
- Compatibility: Suitable for various electronic components
- Application: Ideal for prototyping and testing circuits
- Quality: High-quality construction for durability
- Ease of Use: No soldering is required
- Versatility: Suitable for beginners and professionals
- Portable: Compact size for easy transportation
- Brand: High-quality brand known for electronics products
Package Includes:
1 x MB102 830 Points Solderless Prototype PCB BreadboardSound Sensor Module Red Intelligent Vehicle for Sound Detection
Specifications:
- IC Chip: LM393
- Operating Voltage: 3.3V to 5V
- Induction Distance: 0.5 Meter
- Operating Temperature: Generally -10°C to 70°C
- Storage Temperature: -20°C to 80°C
- Detection Range: Varies depending on the sensitivity and environment, usually around 3 to 5 meters
- Output: Digital output (high/low) or analogue output (voltage level corresponding to sound intensity)
- Frequency Response: Typically 50 Hz to 10 kHz
- Signal Processing: Onboard signal conditioning circuitry for noise filtering and amplification
- Interface: Usually compatible with digital and analogue input pins on microcontrollers like Arduino, Raspberry Pi, etc.
- Dimensions: 4.3 x 1.7 x 0.8 cm (LxWxH)
- Weight: 3g
Package Includes:
1 x Sound Sensor Module Red ColourStepper Motor 28BYJ-48 DC 5V Compatible with ULN2003 Driver
Specifications:
- Motor Model: 28BYJ-48
- Operating Voltage: DC 5V
- Driver Compatibility: ULN2003
- Control Signal: 4-phase
- Reduction Ratio: 1/64
- Step Angle: 5.625°/64
- Interface Type: 5-wire interface (included)
- Dimensions: 28mm × 28mm × 19mm
- Weight: 30g
- Cable Length: 25cm
Package Includes:
1 x 28BYJ-48 Stepper Motor 1 x 5-wire CableSTM32F103C8T6 Microcomputer STM32 Microcontroller Board
Specifications:
- Microcontroller: STM32F103C8T6 ARM Cortex-M3
- Operating Voltage: 3.3V
- Input Voltage: 7V - 12V
- Digital I/O Pins: 37
- Analog Input Pins: 10
- Flash Memory: 64KB
- SRAM: 20KB
- Clock Speed: Up to 72MHz
- Communication: UART, SPI, I2C
- Programming: Compatible with Arduino IDE
- Dimensions: 52mm x 22mm
Package Includes:
1 x STM32F103C8T6 Minimum System BoardTouch Sensor TTP223B Module Capacitive Touch Switch Module
Specifications:
- Model: TTP223B
- Type: Capacitive Touch Sensor
- Operating Voltage: 2 to 5.5 V DC
- Output high VOH: 0.8VCC V
- Output low VOL: 0.3VCC V
- Response Time: Touch Mode – 60ms, Low Power Mode – 220ms
- Touch Sensitivity: Adjustable via capacitor
- Interface: 3 pins (VCC, GND, SIG)
- Power Consumption: Low power consumption
- Operating Temperature: -30°C to 70°C
- Dimensions: 24mm x 24mm
- Weight: 2g
Package Includes:
1 x Digital Sensor TTP223B Module Capacitive Touch SwitchTowerPro SG90 Micro Servo Motor – 180 degree Rotation
TowerPro SG90 Servo Motor with Ultrasonic Sensor
PRODUCT OVERVIEW
- Ultrasonic Operating Voltage(VDC): 3.2 – 5.2
- SG90 Operating Voltage: 3.0 – 7.2V
- Ultrasonic weight (gm): 10
- SG90 weight (gm): 9
- Ultrasonic Measurement Range: 3cm to 350Cm
- SG90 Rotational Degree: 180
- 1 x Ultrasonic Sensor HC-SR04
- 1 x TowerPro SG90 Servo Motor with Cable
- 1 x Set of Horns
- 1 x Set of Screws
ULN2003 Stepper Motor Driver Module
Specifications:
- Model: ULN2003 Stepper Motor Driver Module
- IC: ULN2003
- Operating Voltage: 5V - 12V
- Number of Channels: 4
- Compatible Stepper Motors: Bipolar and Unipolar
- Control Signal Input Voltage: 3.3V - 5V
- Maximum Drive Current: 500mA per channel
- Drive Method: Darlington Array
- Dimensions: 40mm x 40mm
- Mounting Holes Diameter: 3mm
- Weight: 10g
- Interface: 5-pin header for easy connection
- Operating Temperature: -20°C to +85°C
- Compatible with Arduino and other microcontrollers
Package Includes:
1 x ULN2003 Stepper Motor Driver ModuleUltrasonic Sensor HC-SR04 Module Distance Sensor
Specifications:
- Model: HC-SR04
- Operating Voltage: 5V DC
- Operating Current: <15mA
- Operating Frequency: 40kHz
- Measuring Range: 2cm - 400cm
- Accuracy: Up to 3mm
- Operating Temperature: -15°C to 70°C
- Storage Temperature: -20°C to 80°C
- Dimensions: 45mm x 20mm x 15mm
- Weight: 10g
Ultrasonic Sensor with SG90 Motor and 10 pcs M-F Jumper Wire
PRODUCT OVERVIEW
- Ultrasonic Operating Voltage(VDC): 3.2 – 5.2
- SG90 Operating Voltage: 3.0 – 7.2V
- Ultrasonic weight (gm): 10
- SG90 weight (gm): 9
- Ultrasonic Measurement Range: 3cm to 350Cm
- SG90 Rotational Degree: 180
- Jumper Wire Compatible with 2.54mm spacing pin headers
- Jumper Wire Durable and reusable
- 1 x Ultrasonic Sensor HC-SR04
- 1 x TowerPro SG90 Servo Motor with Cable
- 1 x Set of Horns
- 1 x Set of Screws
- 1 x 10Pcs Male to Female Jumper Wire
Universal Tall Landing Gear Skid for DJI F450 F550 SK480 – White
Unsoldered Nano V3.0 ATmega328P Compatible with Arduino
Specifications:
- Microcontroller: ATmega328P
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 8
- DC Current per I/O Pin: 40 mA
- Flash Memory: 32 KB (ATmega328P), of which the bootloader uses 0.5 KB
- SRAM: 2 KB (ATmega328P)
- EEPROM: 1 KB (ATmega328P)
- Clock Speed: 16 MHz
- Dimensions: 18.5mm x 43.2mm
- Weight: 5g
Package Includes:
1 x Arduino Nano Unsoldered V3 ATmega328P CH340 ChipUSB Cable for Arduino UNO and MEGA (USB A to B)
Specifications:
- Cable Type: USB A to B cable
- Length: 30cm
- Colour: Blue
- Weight: 25 gm
- Compatibility: Arduino Uno R3 and Arduino Mega
- Usage: Data transfer and power supply to Arduino boards
- Convenience: Micro USB design for easy connection and disconnection
- Material: High-quality, durable
- Certification: RoHS compliant
Package Includes:
1 x USB Cable for Arduino UNO and MEGA (USB A to B)Vibration Sensor Module SW-420 Motion Sensor Module
Specifications:
- Model: SW-420
- Type: Vibration Sensor Module
- Operating Voltage: 3.3V - 5V
- Detection Range: Adjustable
- Interface: Digital
- Compatibility: Compatible with Arduino Uno R3, NodeMCU ESP8266, Arduino Nano, and other microcontrollers
- Application: Ideal for motion detection, security systems, interactive projects, and more
- Additional Features: Easy to integrate, sensitive vibration sensor, affordable price
- Dimensions: (LxWxH) 32mm x 14mm x 8mm
- Weight: 3g
Package Includes:
1 x Vibration Sensor Module SW-420W1209 Digital Temperature Controller Thermostat Sensor
PRODUCT OVERVIEW:
- Temperature Control Range(°C): -50 to +110
- Resolution @-9.9°C to +99.9°C: 0.1°C
- Resolution @all temperatures: 1°C
- Accuracy: 0.1°C
- Refresh Rate(s): 0.5
- Supply Voltage(V): 12
- Measuring Inputs: NTC10K
- Cable Length: 0.5 Meter
- Output Type: 1 Channel Relay Output
- Capacity: 10A
XH-W3001 AC 220V 1500W Digital Display Temperature Controller
PRODUCT OVERVIEW:
- Output type: AC Output (AC 220V 1500W).
- Output capacity: MAX temperature measurement, display; refrigeration, heating control
- Temperature setting upper and lower limits
- Simple operation, suitable for seafood machines.
- Upper key: The start temperature is displayed in one press, and a long press to set the start temperature.
- Lower key: The stop temperature is displayed in one press, and long press to set stop temperature.
- Control Accuracy: Upto 0.1℃.
XL6009 Boost Converter Module DC-DC Step-Up Converter
Specifications:
- Input Voltage Range: 3V to 32V
- Output Voltage Range: 5V to 35V
- Maximum Output Current: 4A
- Efficiency: Up to 94%
- Operating Frequency: 400kHz
- Operating Temperature Range: -40°C to +85°C
- Dimensions: 43mm x 20mm x 14mm (L x W x H)
- Weight: 7 grams
- Input Capacitor: 100uF (minimum)
- Output Capacitor: 470uF (minimum)
- Short Circuit Protection: Yes
- Over Temperature Protection: Yes
- Reverse Polarity Protection: Yes
- PCB Material: FR-4 Grade with 1.6mm thickness
- Mounting Holes: 3.5mm diameter, spaced 30mm apart (centre to centre)
Package Includes:
1 x XL6009 Boost Converter ModuleYF-S201 Water Flow Sensor with 1-30 Liter/min Flow Rate
Specifications:
- Model: YF-S201
- Flow Rate Range: 1-30 liters per minute
- Operating Voltage: 5V
- Output Signal: Pulse
- Working Temperature: 0-80°C
- Working Pressure: ≤1.75MPa
- Accuracy: ±3%
- Material: Plastic
- Connector Type: G1/2"
- Dimensions (LxWxH): 58 x 40 x 40 mm
- Weight: 85g