28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver
Specifications:
- Stepper Motor Model: 28BYJ-48
- Stepper Motor Driver Model: ULN2003
- Voltage: 5V DC
- Step Angle: 5.625°/64
- Reduction Ratio: 1/64
- Diameter: 28mm
- Voltage: 5V
- Phase: 4
- Current: 0.1A
- Resistance: 50Ω
- Motor Length: 34mm
- Weight: 30g
Package Includes:
1 x 28BYJ-48 Stepper Motor 1 x ULN2003 Stepper Motor Driver Module
65mm BO Wheels, Robot Wheel For BO Motors
PRODUCT OVERVIEW
- A tire with sponge liner for more strength
- With upgraded tire tread for greater friction
- New design wheel for better combination with the motor
- Diameter: 65 mm
- The material of Wheel: High-strength plastic
- The material of Tyre: Rubber
- Color: Yellow
BO Motor 12V DC Dual Shaft 100 RPM Motor – Straight
Specifications:
- Motor Type: DC
- Operating Voltage: 3 ~ 12 VDC
- No Load Current: 40-180mA
- Shaft Type: Dual Shaft
- Shaft Length: 8.5 mm
- Shaft Diameter: 5.5 mm
- Speed: 100 RPM
- Rated Torque: 1Kg-Cm
- Application: Robotics, Automation
- Dimensions (LxWxH): 64 x 22 x 18 mm
- Weight: 30 g
Package Includes:
1 x BO Motor 12V DC Dual Shaft 100 RPM Motor - Straight
Dual Shaft BO Motor With BO Wheel (Yellow)
PRODUCT OVERVIEW
- Kit Contains:Double shaft bo motor with wheel
- Operating Voltage 3V - 12V DC
- RPM Approximately 150 RPM
- No load current 40 - 80 mA
- Output Torque 3.5 kgf.cm
- High quality plastic wheel and BO-series motor
- Plastic Wheels with a slot that matches BO Motor Shaft are made to work with BO motors both Series I and II.
- 66mm diameter, 20mm width
- 1 x BO Motor
- 1 x BO Wheel
MG90S Servo Motor Metal Geared Micro Servo 180 Degree
Specifications:
- Model: MG90S
- Weight: 13.4g
- Dimension: 22.8 x 12.2 x 28.5mm
- Stall Torque: 2.2kg/cm (4.8V), 2.5kg/cm (6V)
- Operating Speed: 0.11s/60° (4.8V), 0.10s/60° (6V)
- Operating Voltage: 4.8 - 6.0V
- Gear Type: Metal
- Connector Wire Length: 175mm
- Rotation: 180 degrees
- Compatible with: RC cars, boats, planes, helicopter
Package Includes:
1 x MG90S Metal Geared Micro Servo 1 x Set of accessories
MG995 Servo Motor Metal Gear High Torque Servo – 180 Degree
Specifications:
- Model: MG995
- Type: Analog Servo
- Operating Voltage: 4.8V - 7.2V
- Stall Torque: 9.4 kg/cm (4.8V), 11 kg/cm (6V)
- Operating Speed: 0.17 sec/60° (4.8V), 0.14 sec/60° (6V)
- Dead Band Width: 5 µs
- Gear Type: Metal
- Rotation: 180 degrees
- Connector Wire Length: 300mm
- Dimensions: 40.7 x 19.7 x 42.9 mm
- Weight: 55g
Package Includes:
1 x MG995 Metal Gear High Torque Servo 1 x Set of Horns
MG996R Servo Motor High Torque Servo Motor (360° Rotation)
Specifications:
- Model: MG996R
- Operating Voltage: 4.8 - 6.6V
- Stall Torque: 9.4kg/cm (4.8V), 11kg/cm (6V)
- Operating Speed: 0.17sec/60° (4.8V), 0.14sec/60° (6V)
- Gear Type: Metal
- Rotation: 360°
- Dimensions: 40.7 x 19.7 x 42.9mm
- Weight: 55g
- Connector Wire Length: 300mm
- Operating Temperature: -30°C to +60°C
- Compatibility: Most microcontrollers
- Control System: Pulse Width Modulation (PWM)
Package Includes:
1 x TowerPro MG996R Digital High Torque Servo Motor
PWM Controller 1203B PWM DC Motor Speed Regulator
Specifications:
- Model: 1203B
- Input Voltage: DC 6V-28V
- Output Current: 3A (Max)
- PWM Duty Cycle: 0%-100%
- Control Method: Potentiometer
- Operating Temperature: -20°C to 40°C
- Dimensions: 6.8cm x 3.6cm x 2.2cm
- Weight: 40g
- Compatibility: PWM on Arduino
- Application: DC Motor Speed Control
Package Includes:
1 x 1203B PWM DC Motor Speed Regulator
Servo Tester 3Ch Digital Multi Servo Tester ESC RC Consistency
Specifications:
- Channels: 3
- Input Voltage: 4.8-6.0V
- Operating Voltage: DC 4.8-6V
- Output Signal: 1.5ms±0.5ms
- Material: Plastic
- Size: 48mm x 42mm x 17mm
- Weight: 31g
- Compatible with: servo motors and electronic speed controllers (ESCs)
- Easy-to-use controls for adjusting settings
- Compact and lightweight design for portability
- Durable construction for long-lasting use
- Ideal for hobbyists and professionals alike
- Application: Ideal for testing and troubleshooting servo motors and ESCs in RC vehicles
Package Includes:
1 x Servo Tester 3Ch Digital Multi Servo Tester ESC RC Consistency
SG90 Motor with Servo Tester Consistency Speed Controller
Specifications:
- Product Name: SG90 Motor with Servo Tester
- Model: SG90
- Servo Type: Micro
- Model Series: SG Series
- Operating Voltage: 4.8 - 6.0V
- No-load Speed: 0.12sec/60 degrees (4.8V), 0.10sec/60 degrees (6.0V)
- Stall Torque: 1.2 - 1.6kg/cm (4.8V), 1.6 - 2.0kg/cm (6.0V)
- Temperature Range: -30°C to +60°C
- Dimensions: 23 x 12.2 x 29 mm
- Weight: 17g
Package Includes:
1 x TowerPro SG90 Mini Servo Motor 1 x Digital Multi Servo Tester
Stepper Motor 28BYJ-48 DC 5V Compatible with ULN2003 Driver
Specifications:
- Motor Model: 28BYJ-48
- Operating Voltage: DC 5V
- Driver Compatibility: ULN2003
- Control Signal: 4-phase
- Reduction Ratio: 1/64
- Step Angle: 5.625°/64
- Interface Type: 5-wire interface (included)
- Dimensions: 28mm Ă— 28mm Ă— 19mm
- Weight: 30g
- Cable Length: 25cm
Package Includes:
1 x 28BYJ-48 Stepper Motor 1 x 5-wire Cable
TowerPro SG90 Micro Servo Motor – 180 degree Rotation
TowerPro SG90 Servo Motor with Ultrasonic Sensor
PRODUCT OVERVIEW
- Ultrasonic Operating Voltage(VDC): 3.2 – 5.2
- SG90 Operating Voltage: 3.0 – 7.2V
- Ultrasonic weight (gm): 10
- SG90 weight (gm): 9
- Ultrasonic Measurement Range: 3cm to 350Cm
- SG90 Rotational Degree: 180
- 1 x Ultrasonic Sensor HC-SR04
- 1 x TowerPro SG90 Servo Motor with Cable
- 1 x Set of Horns
- 1 x Set of Screws
ULN2003 Stepper Motor Driver Module
Specifications:
- Model: ULN2003 Stepper Motor Driver Module
- IC: ULN2003
- Operating Voltage: 5V - 12V
- Number of Channels: 4
- Compatible Stepper Motors: Bipolar and Unipolar
- Control Signal Input Voltage: 3.3V - 5V
- Maximum Drive Current: 500mA per channel
- Drive Method: Darlington Array
- Dimensions: 40mm x 40mm
- Mounting Holes Diameter: 3mm
- Weight: 10g
- Interface: 5-pin header for easy connection
- Operating Temperature: -20°C to +85°C
- Compatible with Arduino and other microcontrollers