Continue shopping “IMAX B3 Lipo Battery Balance Charger for 2S-3S LiPo” has been added to your cart.
Cart totals
| Subtotal | ₹1,445.00 |
|---|---|
| Shipping |
Shipping to Madhya Pradesh. |
| Total | ₹1,445.00 |
You may be interested in…
1602 LCD Board Keypad Shield with Blue Backlight
Specifications:
- Display: 16x2 LCD display
- Backlight: Blue backlight
- Input: Keypad for user input
- Compatibility: Compatible with Arduino Uno, Mega, Leonardo, and other compatible boards
- Mounting: Easy to mount on Arduino board
Package Includes:
1 x LCD Display 1602 Board Keypad Shield with Blue Backlight
Arduino Uno R3 with L293D Motor Driver
PRODUCT OVERVIEW:-
- Experience the power of Arduino Uno R3 combined with L293D motor driver shield for seamless motor control.
- Microcontroller ATmega328P With Operating Voltage : 5V
- Benefit from the ATmega328P microcontroller's abundant memory for program and data storage.
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Precisely control motors with the L293D shield's two H-bridge output channels.
- Optimize performance with a dual power supply configuration for both Arduino Uno R3 and motors.
- Explore a wide range of applications, including robotics, home automation, and motor-driven projects.
- Rely on the proven reliability and robustness of this widely used combination trusted by hobbyists, enthusiasts, and professionals.
- Expand project possibilities with compatibility with various sensors, actuators, and components.
Package Includes:
- 1 x Arduino Uno R3 with Cable
- 1 x L293D Motor Driver Shield
L298N Motor Driver Module with PWM Control
PRODUCT OVERVIEW
- Driver chip: L298 dual H-bridge driver chip.
- Operates up to 35V DC.
- Drive part of the peak current Io: 2A / Bridge.
- The logical part of the terminal power supply range Vss:4.5V-5.5V
- The logical part of the operating current range: 0 ~ 36mA.
- Maximum power consumption: 20W.
- Current Sense for each motor.
- Heatsink for better performance.
- Power-On LED indicator.
- Drives up to 4 motors.
Servo Tester 3Ch Digital Multi Servo Tester ESC RC Consistency
Specifications:
- Channels: 3
- Input Voltage: 4.8-6.0V
- Operating Voltage: DC 4.8-6V
- Output Signal: 1.5ms±0.5ms
- Material: Plastic
- Size: 48mm x 42mm x 17mm
- Weight: 31g
- Compatible with: servo motors and electronic speed controllers (ESCs)
- Easy-to-use controls for adjusting settings
- Compact and lightweight design for portability
- Durable construction for long-lasting use
- Ideal for hobbyists and professionals alike
- Application: Ideal for testing and troubleshooting servo motors and ESCs in RC vehicles
Package Includes:
1 x Servo Tester 3Ch Digital Multi Servo Tester ESC RC Consistency
DC Water Pump – Micro DC 3-6V Submersible Mini Water Pump
PRODUCT OVERVIEW
- Mini pump, delicate and light, very perfect for an experiment, aquarium, fish tank, and fountain, etc.
- DC 3v to 6v submersible pump
- Micro mini submersible water pump 3v to 6v
- DC water pump for DIY
- DC pumps for the HOBBY kit.
DC Dual Shaft BO Gear Motor & Wheel With SG90 Servo Motor
PRODUCT OVERVIEW
- Operating Voltage 3V - 12V DC
- RPM Approximately 150 RPM
- No load current 40 - 80 mA
- Output Torque 3.5 kgf.cm
- High quality plastic wheel and BO-series motor
- Plastic Wheels with a slot that matches BO Motor Shaft are made to work with BO motors both Series I and II.
- 66mm diameter, 20mm width
- Operating Voltage: 5 V
- Sonar Sensing Range: 2-400 cm
- Max. Sensing Range: 450 cm
- Frequency: 40 kHz
- Operating voltage: 3.0V~ 7.2V
- Stall torque @4.8V : 1.2kg-cm
- Stall torque @6.6V: 1.6kg-
- 4 x BO Motor
- 4 x BO Wheel
- 1 x HC-SR04 Ultrasonic Sensor
- 1 x Towerpro SG90 Mini Servo Motor
PWM Controller 1203B PWM DC Motor Speed Regulator
Specifications:
- Model: 1203B
- Input Voltage: DC 6V-28V
- Output Current: 3A (Max)
- PWM Duty Cycle: 0%-100%
- Control Method: Potentiometer
- Operating Temperature: -20°C to 40°C
- Dimensions: 6.8cm x 3.6cm x 2.2cm
- Weight: 40g
- Compatibility: PWM on Arduino
- Application: DC Motor Speed Control
Package Includes:
1 x 1203B PWM DC Motor Speed Regulator
Arduino Uno R3 With Jumper Wires 60 Pieces
Product Overview:
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 40P color DuPont line
- Length: 300mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 120 pcs chromatic color jump wire
- High quality and in good working condition
- Durable and reusable
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
- 1 x 20 pcs Male to Male jumper wire set
- 1 x 20 pcs Male to Female jumper wire set
- 1 x 20 pcs Female to Female jumper wire set
40 Pin Dupont Male to Female Jumper Wire, 40 Pieces
PRODUCT OVERVIEW:
- 40 P color DuPont line
- Weight: 45 gm
- Compatible with 2.54mm spacing pin headers
- 40 pcs chromatic male to female color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
Battery Tester 1-8S Lipo Battery Voltage Tester
Specifications:
- Compatibility: 1-8S lipo batteries
- Voltage Measurement Range: 3.7V-30V
- Voltage Display Resolution: 0.01V
- Voltage Display Accuracy: ±0.03V
- Operating Temperature: -10°C to 50°C
- Display: LED screen
- Dimensions: 40mm x 25mm x 10mm
- Weight: 10g
- Features: Overvoltage and undervoltage alarm, low voltage alarm, reverse polarity protection
Package Includes:
1 x Battery Tester 1-8S Lipo Battery Voltage Tester
30A ESC Electronic Speed Controller With Dean Connector
Specifications:
- Voltage Range: 7.4V - 14.8V
- Continuous Current: 30A
- BEC Output: 5V/2A
- Input Connector: Dean Connector
- Output Connector: 3.5mm bullet connectors
- Dimensions: 45mm x 25mm x 10mm
- Weight: 25g (including wires)
- Compatibility: Suitable for RC cars, boats, drones, and other vehicles
- Color: Yellow casing for easy identification
- Quantity: Set of 4 ESCs
Package Includes:
4 x ESC 30A Simonk Electronic Speed Controller with Connectors.
Dual Shaft BO Motor & Wheel (Set of 4) & Arduino UNO R3
PRODUCT OVERVIEW
- Operating Voltage 3V - 12V DC
- RPM Approximately 150 RPM
- No-load current 40 - 80 mA
- Output Torque 3.5 kg-cm
- High-quality plastic wheel and BO-series motor
- Plastic Wheels with a slot that matches BO Motor Shaft are made to work with BO motors in both Series I and II.
- 66mm diameter, 20mm width
- Operating Voltage: 5 V
- Sonar Sensing Range: 2-400 cm
- Max. Sensing Range: 450 cm
- Frequency: 40 kHz
- Operating voltage: 3.0V~ 7.2V
- Stall torque @4.8V : 1.2kg-cm
- Stall torque @6.6V: 1.6kg
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 4 x BO Motor
- 4 x BO Wheel
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
1400KV Brushless Motor With Soldered Bullet Connector (Set of 4)
Specifications:
- Model: A2212
- KV: 1400
- Motor Type: Brushless DC (BLDC)
- Number of Motors: 4
- Connector Type: Soldered bullet connectors
- Compatible With: Quadcopters, hexacopters, octocopters
- Recommended Propeller Size: 8 to 10 inches
- Weight: Approximately 50g per motor
- Dimensions: 27.5mm x 27mm x 27mm
- Operating Voltage: 7.4V to 11.1V
- Maximum Continuous Current: 12A
- Maximum Continuous Power: 120W
- Shaft Diameter: 3.17mm
- Shaft Length: 12mm
- Mounting Hole Spacing: 16mm x 19mm
- Motor Wire Length: Approximately 150mm
Package Includes:
- 1 x A2212 1400Kv Brushless Motor for Drone
- 1 x Prop Adapter
- A Motor Holder (X-type) and a set of screws
Jumper Wires M-M, M-F, F-F, 20cm, 120 Pieces
PRODUCT OVERVIEW
- 40P color DuPont line
- Length: 300mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 120 pcs chromatic color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
- 1 x 40 pcs Male to Male jumper wire set
- 1 x 40 pcs Male to Female jumper wire set
- 1 x 40 pcs Female to Female jumper wire set
A2212 1000KV BLDC Motor With Soldered Bullet Connector (Set of 4)
PRODUCT OVERVIEW
- Motor KV: 1000
- Current Capacity: 12A/60S
- LiPO Batteries: 2S-3S
- Efficiency Current: 4-10A
- Shaft Diameter: 3.17 mm
- Prop Adapter is quality tested before shipping to customers.
- 4 x A2212 1000Kv Brushless Motor for Drone
- 4 x Prop Adapter
- A Motor Holder (X-type) and set of screws
W1209 Digital Temperature Controller Thermostat Sensor
PRODUCT OVERVIEW:
- Temperature Control Range(°C): -50 to +110
- Resolution @-9.9°C to +99.9°C: 0.1°C
- Resolution @all temperatures: 1°C
- Accuracy: 0.1°C
- Refresh Rate(s): 0.5
- Supply Voltage(V): 12
- Measuring Inputs: NTC10K
- Cable Length: 0.5 Meter
- Output Type: 1 Channel Relay Output
- Capacity: 10A
FlySky FS-i6 2.4G 6CH RC Transmitter with Receiver FS-iA6B
Specifications:
- Model: FlySky FS-i6
- Channels: 6
- Frequency: 2.4GHz
- Receiver: FS-iA6B
- Control Range: Over 500 meters
- Power Supply: 4 x AA batteries (not included)
- Compatibility: RC cars, drones, and other devices
- Dimensions: (Transmitter) 174 x 89 x 190mm; (Receiver) 47 x 26.2 x 15mm
- Weight: (Transmitter) 392g; (Receiver) 6.4g
Package Includes:
1x FlySky FS-i6 2.4G 6CH PPM RC Transmitter 1x FS-iA6B Receiver 1x User Manual
XH-W3001 AC 220V 1500W Digital Display Temperature Controller
PRODUCT OVERVIEW:
- Output type: AC Output (AC 220V 1500W).
- Output capacity: MAX temperature measurement, display; refrigeration, heating control
- Temperature setting upper and lower limits
- Simple operation, suitable for seafood machines.
- Upper key: The start temperature is displayed in one press, and a long press to set the start temperature.
- Lower key: The stop temperature is displayed in one press, and long press to set stop temperature.
- Control Accuracy: Upto 0.1℃.
NEO 6M GPS Module Geographic Positioning System with EPROM
Specifications:
- Product Name: NEO 6M GPS Module with EPROM
- Chipset: ublox NEO-6M
- Compatibility: Arduino, Raspberry Pi, and other microcontroller platforms
- Satellite Systems: GPS, GLONASS, BeiDou
- Memory: EPROM for configuration storage
- Interfaces: UART serial interface
- Operating Voltage: 3.3V - 5V
- Operating Current: 45mA
- Operating Temperature: -40°C to +85°C
- Antenna: Ceramic patch antenna with LNA
- Position Accuracy: 2.5m CEP (Circular Error Probable)
- Update Rate: Up to 5Hz
- Dimensions: 25mm x 35mm
- Weight: 50g
Package Includes:
1 x NEO-6M GPS Board 1 x Detachable Antenna
40 Pin Dupont Male to Male Jumper Wire, 40 Pieces
PRODUCT OVERVIEW:
- 40P color DuPont line
- Weight: 45 gm
- Compatible with 2.54mm spacing pin headers
- 40pcs chromatic male to male color jumper wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
2000W SCR High-Power Voltage Regulator Speed Controller
Specifications:
- Power Output: 2000W
- Voltage Range: 0-220V AC
- Control Type: SCR (Silicon Controlled Rectifier)
- Input Voltage: 220V AC
- Output Voltage: Adjustable
- Dimensions: 85mm x 55mm x 38mm (L x W x H)
- Weight: 41g
- Material: High-quality components for durability
- Technology: Thyristor Power Controller
- Compatibility: Compatible with various electronic components
Package Includes:
1 x 2000W SCR High-Power Voltage Regulator Speed Controller
Jumper Wires M-M, M-F, F-F, 20cm, 60 Pieces
Specifications:
- Quantity: 60 pieces
- Length: 20cm each
- Wire Type: Male-to-male, male-to-female, female-to-female
- Compatibility: Suitable for use with breadboards and Arduino
- Material: High-quality copper core with PVC insulation
- Color: Assorted colors for easy identification
- Application: Ideal for electronics prototyping, DIY projects, and circuit design
- Flexibility: Flexible and durable wires for easy handling
- 1 x 20pcs Male to Male Jumper Wire set
- 1 x 20pcs Male to Female Jumper Wire set
- 1 x 20pcs Female to Female Jumper Wire set
Arduino Nano V3 Soldered Board with USB Cable
Specifications:
- Microcontroller: ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limit): 6-20V
- Digital I/O Pins: 14 (6 of which are PWM)
- Analog Input Pins: 8
- Flash Memory: 32 KB (2 KB used by bootloader)
- SRAM: 2 KB
- EEPROM: 1 KB
- Clock Speed: 16 MHz
- Dimensions: 1.85 cm x 4.32 cm
- Weight: Approximately 7g
Package Includes:
1 x Nano Soldered V3 Board 1 x USB Cable
5V 4 Channel Relay Control Board Module
Specifications:
- Voltage Compatibility: 5V
- Number of Channels: 4
- Driver Current per Channel: 15-20mA
- Relay Type: High-current, AC250V 10A; DC30V 10A
- Interface Compatibility: Arduino, 8051, AVR, PIC, DSP, ARM, MSP430, TTL logic
- LED Indicators: Included for relay output status
Package Includes:
1 x 5V 4 Channel Relay Board Module
Arduino Uno R3 with Jumper Wires 120 Pcs
PRODUCT OVERVIEW
- Micro-controller : ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6
- 40P color DuPont line
- Length: 300mm
- Weight: 20~25 gm each
- Compatible with 2.54mm spacing pin headers
- 120 pcs chromatic color jump wire
- High quality and in good working condition
- Durable and reusable
- 1 x Arduino Uno R3 Development Board
- 1 x USB Cable
- 1 x 40 pcs Male to Male jumper wire set
- 1 x 40 pcs Male to Female jumper wire set
- 1 x 40 pcs Female to Female jumper wire set