Female to Female Jumper Wires 40 Pin Dupont Jumper Wire 20CM
Original price was: ₹199.00.₹69.00Current price is: ₹69.00.
Specifications:
- Connector Type: Female to Female
- Pin Count: 40
- Length: 20 cm
- Color: Assorted colors for easy identification
- Pins: Standard 0.1-inch (2.54mm) spacing
- Flexibility: Flexible and easy to bend
- Quantity:Â 40 pieces
- Dimensions: Each wire – Length: 20cm, Diameter: 0.1cm
- Weight:Â 40g
Package Includes:
40 x Female to Female Jumper Wires 20cm
Our female-to-female jumper wires are great for your electronic projects. Additionally, these Dupont jumper wires come in a set of 40 pins, each 20CM long. They make your connections easy and secure, providing a reliable link between your microcontroller and other electronic components.
These female-to-female jumper wires work well with the STM32F103C8T6 Blue Pill Development Board. They fit tightly into the pins, making sure the connection is stable. Whether you use an Ultrasonic Sensor or another module, these F F Jumper wires will do the job.
These jumper wires also work with different devices, including the USB To UART TTL Serial CP2102 Module. These items are well-made, and you can use them often without wearing them out. The Dupont female-to-female connectors are easy to put in and remove, making your project quick and easy.
We offer a variety of jumper wires designed to facilitate connections in your projects. You can use male-to-female and male-to-male jumper wires as needed. Additionally, female-to-female DuPont cables provide an excellent solution for interconnecting various components within your project. Not only are they easy to utilize, but they also ensure a tight fit, streamlining your workflow. These cables are particularly ideal for linking sensors, modules, and other components in your electronic endeavors.
The jumper wires are cheap and suitable for hobbyists and professionals. They are essential in any toolkit, ensuring you can easily connect your microcontroller to different modules.
These female-to-female jumper wires are a must for any DIY electronics fan. They provide a good connection for all your needs, whether you use an STM32F103C8T6 Blue Pill Development Board, a USB To UART TTL Serial CP2102 Module, or an Ultrasonic Sensor. Quality and reliability are essential when picking jumper wires. Buy this Female-to-Female Jumper Wire set today for the best electronic components for your next project.
| Weight | 0.1 kg |
|---|---|
| Dimensions | 15 × 10 × 8 cm |
Q: What is a 40-Pin Dupont Female to Female Jumper Wire?
A: A 40-Pin Dupont Female to Female Jumper Wire is a set of 40 individual wires with female connectors on both ends, that can be used to connect components on a breadboard or circuit board.
Q: What is the length of each wire in the 40 Pin Dupont Female to Female Jumper Wire set?
A: The length of each wire in the 40 Pin Dupont Female to Female Jumper Wire set is typically around 20cm (7.87 inches).
Q: What is the gauge of the wire in the 40 Pin Dupont Female to Female Jumper Wire set?
A: The gauge of the wire in the 40-Pin Dupont Female to Female Jumper Wire set is typically 26AWG.
Q: What is the purpose of a Dupont Female to Female Jumper Wire?
A: A Dupont Female to Female Jumper Wire can be used to connect components on a breadboard or circuit board for prototyping, testing, or experimental purposes.
Q: What are some common applications for the 40 Pin Dupont Female to Female Jumper Wire set?
A: The 40-Pin Dupont Female to Female Jumper Wire set is commonly used in electronics projects, robotics, and other applications where components need to be connected on a breadboard or circuit board.
Q: Can the wires in the 40-Pin Dupont Female to Female Jumper Wire set be separated?
A: Yes, the wires in the 40 Pin Dupont Female to Female Jumper Wire set can be separated from each other and used individually.
Q: Are the connectors on the 40 Pin Dupont Female to Female Jumper Wire set compatible with standard breadboards?
A: Yes, the connectors on the 40 Pin Dupont Female to Female Jumper Wire set are compatible with standard breadboards and can be easily inserted into the breadboard's rows.
Q: How durable are the wires in the 40-Pin Dupont Female to Female Jumper Wire set?
A: The durability of the wires in the 40 Pin Dupont Female to Female Jumper Wire set can vary depending on usage, but they are generally made from flexible, high-quality materials that can withstand repeated use.
Q: Can the 40-Pin Dupont Female to Female Jumper Wire set be used with other types of connectors?
A: No, the 40-Pin Dupont Female to Female Jumper Wire set is designed specifically for use with Dupont connectors and may not be compatible with other types of connectors.
You may also like…
16×2 LCD Display with I2C Module IIC Serial Interface Adapter
Specifications:
- Display Size: 16 characters x 2 lines
- Display Type: LCD (Liquid Crystal Display)
- Interface: I2C (Inter-Integrated Circuit)
- I2C Address: 0x27
- Backlight: Blue
- Operating Voltage: 5V
- Dimensions (L x W x H): 80mm x 36mm x 12mm
- Weight: 30g
- Compatible with Arduino, Raspberry Pi, and other microcontrollers
- Easy to use and integrate into projects
- Ideal for displaying text, numbers, and symbols
- Includes I2C module for simplified interfacing
Package Includes:
1 x LCD 16×2 1602 Alphanumeric Display Blue 1 x I2C Module
2.4 inch TFT LCD Display Shield for Arduino Uno
Specifications:
- Display Type: 2.4" diagonal Touch LCD TFT
- Resolution: 240×320 pixels
- Color Depth: 18-bit (262,000 colors)
- Voltage Compatibility: 5V compatible, use with 3.3V or 5V logic
- MicroSD Card Slot: Included for additional storage options
- Compatibility: Works with Arduino Uno and Mega-compatible boards
Package Includes:
1 x 2.4 inch TFT LCD Display Shield for Arduino UNO Mega, 1 x Stylus Pen
28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver
Specifications:
- Stepper Motor Model: 28BYJ-48
- Stepper Motor Driver Model: ULN2003
- Voltage: 5V DC
- Step Angle: 5.625°/64
- Reduction Ratio: 1/64
- Diameter: 28mm
- Voltage: 5V
- Phase: 4
- Current: 0.1A
- Resistance: 50Ω
- Motor Length: 34mm
- Weight: 30g
Package Includes:
1 x 28BYJ-48 Stepper Motor 1 x ULN2003 Stepper Motor Driver Module
65mm BO Wheel for RC Car Robot Wheel for BO Motor
Specifications:
- Wheel Diameter: 65mm
- Wheel Width: 27mm
- D-hole For BO Motor: 6mm
- Compatible with: BO Motor
- Material: High-quality plastic
- Center Shaft Hole Diameter: 5.4 mm (Round edge) and 3.5 mm (Flat edge)
- Color: Black (Tyre), Yellow (Rim)
- Body Material: Plastic
- Grip Material: Rubber
- Weight: 34g
Package Includes:
1 x 65mm BO Wheel for BO Motor
A4988 Stepper Motor Driver with Heatsink
Specifications:
- Model: A4988 Stepper Motor Driver with Heatsink
- Compatible with: Arduino Uno
- Operating Voltage: 8V to 35V
- Output Current: Up to 2A per phase (with adequate cooling)
- Microstepping: Full, half, quarter, eighth, and sixteenth-step modes
- Built-in Heatsink: Yes
- Connector Type: 4-pin header for motor connection, 2-pin header for power supply
- Additional Features: Thermal shutdown circuitry, cross-current protection
- Dimensions: 20mm x 15mm x 11mm
- Weight: 5 g
Package Includes:
1 x A4988 Stepper Motor Driver with Heatsink
Arduino Kit BO Motor with Wheel and Arduino Uno R3 with Jumper Wires
Specifications:
Specifications of BO Motor:
- Motor Type:Â DC
- Operating Voltage:Â 3 ~ 12 VDC
- Shaft Type:Â Dual Shaft
- Shaft Length:Â 8.5 mm
- Shaft Diameter:Â 5.5 mm
- Speed:Â 100 RPM
- Dimensions (LxWxH):Â 64 x 22 x 18 mm
- Weight:Â 30 g
Specifications of BO Wheel:
- Wheel Diameter:Â 65mm
- Wheel Width:Â 27mm
- D-hole For BO Motor:Â 6mm
- Compatible with:Â BO Motor
- Color:Â Black (Tyre), Yellow (Rim)
- Weight:Â 34g
Specifications of Arduino Uno:
- Microcontroller:Â ATmega328P
- Operating Voltage:Â 5V
- Input Voltage (recommended):Â 7-12V
- Digital I/O Pins:Â 14 (of which 6 provide PWM output)
- Analog Input Pins:Â 6
- SRAM:Â 2 KB
- EEPROM:Â 1 KB (ATmega328P)
- Clock Speed:Â 16 MHz
- Dimensions:Â 75 x 54 x 12 mm (L x W x H)
- Weight:Â 28 g (without cable), 54 g (with cable)
Specifications of Jumper Wires:
- Wire Type:Â Male-to-male, male-to-female, female-to-female
- Color:Â Assorted colors for easy identification
- Wire Length: 20 cm
- Diameter:Â 0.1cm
- Pins: Standard 0.1-inch (2.54mm) spacing
- Quantity:Â 60 pieces
- Weight:Â 50g
Package Includes:
1 x Arduino Uno R3 Development Board 1 x USB Cable 4 x BO Motor 4 x BO Wheel 20 x Male to Male jumper wires 20 x Male to Female jumper wires 20 x Female to Female jumper wires
Arduino Nano Soldered V3 Board Compatible with Arduino
Specifications:
- Compatibility: Compatible with Arduino Nano V3
- Pins: Pre-soldered for easy connection
- Microcontroller: ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limit): 6-20V
- Flash Memory: 32KB (ATmega328), of which 2KB used by the bootloader
- SRAM: 2KB (ATmega328)
- EEPROM: 1KB (ATmega328)
- Clock Speed: 16MHz
- Dimensions: 18.5 x 43.2 mm
- Weight: 7g
Package Includes:
1 x Arduino Nano V3 Soldered ATMEGA328 Compatible BoardRelated products
Crocodile Clips Double Ended Cable Alligator Clips 10 Pieces
Specifications:
- Quantity: 10 pieces
- Material: Metal clips with wire leads
- Clip Length: 5 cm (2 inches)
- Wire Length: 45 cm (18 inches)
- Compatibility: Compatible with Arduino Uno R3, breadboards, and other electronic components
- Usage: Ideal for connecting wires, breadboards, and components in electronic projects
- Features: Double-ended design for easy and secure connections
- Application: Suitable for hobbyists, students, and professionals working on DIY projects or experiments
- Weight: 82 g
Package Includes:
10 x Crocodile Clips Double Ended Cable Alligator Clips
DS18B20 Temperature Sensor Waterproof Temperature Probe 1M
Specifications:
- Model: DS18B20
- Sensor Type: DS18B20 Temperature Sensor
- Temperature Range: -55°C to +125°C
- Operating Voltage: 3 ~ 5.5 VDC
- Accuracy: ±0.5°C (from -10°C to +85°C)
- Waterproof: Yes
- Cable Length: 1 Meter
- Weight: 20g
Package Includes:
1 x Waterproof Digital Thermal Probe DS18B20 1 meter cable
Jumper Wires M-M, M-F, F-F, 20cm, 120 Pieces
Specifications:
- Pin Count: 40
- Connector Type: Dupont Wire
- Color: Multicolor for easy identification
- Wire Length: 20 cm
- Diameter: 0.1cm
- Pins: Standard 0.1-inch (2.54mm) spacing
- Flexibility: Flexible and durable
- Quantity: 120 pieces
- Weight: 100g
Package Includes:
40 x Male to Male Jumper Wire set 40 x Male to Female Jumper Wire set 40 x Female to Female Jumper Wire set
Jumper Wires M-M, M-F, F-F, 20cm, 60 Pieces
Specifications:
- Pin Count: 40
- Wire Type:Â Male-to-male, male-to-female, female-to-female
- Compatibility:Â Suitable for use with breadboards and Arduino
- Material:Â High-quality copper core with PVC insulation
- Color:Â Assorted colors for easy identification
- Wire Length: 20 cm
- Diameter: 0.1cm
- Pins: Standard 0.1-inch (2.54mm) spacing
- Flexibility: Flexible and durable
- Application:Â Ideal for electronics prototyping, DIY projects, and circuit design
- Quantity: 60 pieces
- Weight: 50g
Package Includes:
20 x Male to Male Jumper Wire set 20 x Male to Female Jumper Wire set 20 x Female to Female Jumper Wire set
Micro USB Cable USB-2.0 Mini B Cable for Arduino Nano
Specifications:
- Cable Type: Micro USB
- Connector Type: USB-2.0 Mini B
- Length: 20 cm
- Compatibility: Arduino Nano and other devices with USB-2.0 Mini B ports
- Features: Plug-and-Play, Durable Construction, High-Speed Data Transfer
- Material: PVC
- Color: Blue
Package Includes:
1 x Micro USB Cable USB-2.0 Mini B Cable for Arduino Nano (20 cm)
USB Cable for Arduino UNO and MEGA (USB A to B)
Specifications:
- Cable Type: USB A to B cable
- Colour: Blue
- Compatibility: Arduino Uno R3 and Arduino Mega
- Usage: Data transfer and power supply to Arduino boards
- Convenience: Micro USB design for easy connection and disconnection
- Material: High-quality, durable
- Certification: RoHS compliant
- Length: 30cm
- Weight: 25 gm
