Showing all 66 results

1000KV BLDC Motor A2212 With Soldered Bullet Connector

495.00
PRODUCT OVERVIEW
  • Motor KV: 1000
  • Current Capacity: 12A/60S
  • LiPO Batteries: 2S-3S
  • Efficiency Current: 4-10A
  • Shaft Diameter: 3.17 mm
  • Prop Adapter is quality tested before shipping to customers.
Package Includes :
  • 1 x A2212 1000Kv Brushless Motor for Drone
  • 1 x Prop Adapter
  • A Motor Holder (X-type) and a set of screws

1000KV Motor with 30A ESC and 1045 Propeller Set For RC Plane

999.00
PRODUCT OVERVIEW:
  • The steel design is capable of withstanding competitional conditions.
  • Lightweight design makes them suitable for a wide range of Quad-copters and Hexacopter Frames.
  • Compact size.
  • Offers great performance and value for money.
  • Smooth throttle response for best RC experience.
  • ESC used has an On-Board BEC.
  • Faster and Better speed control.

Package Includes:

  • 1 x A2212 10T 13T 1000KV Brushless Motor for Drone with Soldered Connector
  • 4 x Prop Adapter
  • Motor Holder (X-type) and set of screws
  • 1 x ESC 30A BLDC ESC
  • 2 x 1045(10×4.5) SF Propellers (1CW, 1CCW).
  • 2 x Sets of prop reducers.

1045/1045R 10 inch Propeller Pair (CW+CCW), Black

79.00
PRODUCT OVERVIEW
  • Length: 10″.
  • Pitch: 4.5″.
  • Weight: 28 gm.
  • Shaft Diameter: 9.5 mm.
  • Total Length: 10 inch / 250 mm
  • Material: Carbon Nylon
Package Includes:
  • 1 x Counter-Clockwise (CCW) Propellers 1045 (10×4.5)
  • 1 x Clockwise (CW) Propellers 1045 (10×4.5)
  • Set of prop Reducers

1045/1045R 10 inch Propeller Pair (CW+CCW), Black (Set of 2)

139.00
PRODUCT OVERVIEW
  • Length: 10″.
  • Pitch: 4.5″.
  • Weight: 28 gm.
  • Shaft Diameter: 9.5 mm.
  • Total Length: 10 inch / 250 mm
  • Material: Carbon Nylon
Package Includes:
  • 2 x Counter-Clockwise (CCW) Propellers 1045 (10×4.5)
  • 2 x Clockwise (CW) Propellers 1045 (10×4.5)
  • Set of prop Reducers

1045/1045R 10 inch Propeller Pair (CW+CCW), Black (Set of 5)

349.00
PRODUCT OVERVIEW
  • Length: 10″.
  • Pitch: 4.5″.
  • Weight: 28 gm.
  • Shaft Diameter: 9.5 mm.
  • Total Length: 10 inch / 250 mm
  • Material: Carbon Nylon
Package Includes:
  • 5 x Counter-Clockwise (CCW) Propellers 1045 (10×4.5)
  • 5 x Clockwise (CW) Propellers 1045 (10×4.5)
  • Set of prop Reducers

2.4 inch TFT LCD Display Shield for Arduino Uno

649.00

Specifications:

  • Display Type: 2.4" diagonal Touch LCD TFT
  • Resolution: 240×320 pixels
  • Color Depth: 18-bit (262,000 colors)
  • Voltage Compatibility: 5V compatible, use with 3.3V or 5V logic
  • MicroSD Card Slot: Included for additional storage options
  • Compatibility: Works with Arduino Uno and Mega-compatible boards

Package Includes:

1 x 2.4 inch TFT LCD Display Shield for Arduino UNO Mega, 1 x Stylus Pen

2200mAH Lipo Battery 11.1v for Quadcopter Plane Multirotor

1,999.00
PRODUCT OVERVIEW
  • It has three cells and outputs 11.1V storing 2200mAh of charge.
  • It’s a high power output battery
  • It has a very special internal structure, which requires a dedicated balance charger to charge.
  • Li-Poly Battery Charger is a suitable mate.
Package Included: 1 x 11.1V 2200MAH Lipo Battery

30A ESC – Electronic Speed Controller With Dean Connector

498.00
PRODUCT OVERVIEW
  • Constant Current: 30A (Max 40A<10s).
  • BEC: 5V 3A.
  • Input Voltage: 11.1 ~ 11.7 V.
  • Li-Po battery: 2S ~ 3S.
  • Ni-MH 4-10 CELLS Auto-Detect
Package Includes: 1 x ESC 30A Simonk Electronic Speed Controller with Connectors.

30A ESC Electronic Speed Controller With Dean Connector (Set of 4)

1,949.00
PRODUCT OVERVIEW
  • Constant Current: 30A (Max 40A<10s).
  • BEC: 5V 3A.
  • Input Voltage: 11.1 ~ 11.7 V.
  • Li-Po battery: 2S ~ 3S.
  • Ni-MH 4-10 CELLS Auto-Detect
Package Includes: 4 x ESC 30A Simonk Electronic Speed Controller with Connectors.

30A ESC Simonk Electronic Speed controller with Connector (Set of 4)

2,099.00
PRODUCT OVERVIEW
  • Model: SIMONK 30A.
  • Constant Current: 30A (Max 40A < 10 sec).
  • BEC: 5V 2A.
  • Suitable Batteries: 2-3S LiPo.
  • Application: BLDC Motors, Multirotor, Rc Planes, etc.
Package Includes: 4 x Simonk 30A BLDC ESC Electronic Speed Controller

30A ESC Simonk Electronic speed controller with Dean Connector

497.00
PRODUCT OVERVIEW
  • Model: 30A ESC SIMONK.
  • Constant Current: 30A (Max 40A < 10 sec).
  • BEC: 5V 2A.
  • Suitable Batteries: 2-3S LiPo.
  • Application: BLDC Motors, Multirotor, Rc Planes, etc.
Package Includes: 1 x Simonk 30A BLDC ESC Electronic Speed Controller

3dBi Magnetic Mount Antenna for GSM FCT Device (10 Feet Long)

169.00
PRODUCT OVERVIEW
  • Frequency (MHz): 2400 – 2500MHz
  • Gain: 3 dBi
  • Impedance (Ω): 50
  • Connector: SMA- Male
  • VSWR :< 2.0
Package Includes: 1 x GSM 3dBi Magnetic Spring Antenna 2400 – 2483 MHz (10 Feet Long Wire)

40 Pin Dupont Female to Female Jumper Wire, 40 Pieces

69.00
PRODUCT OVERVIEW
  • 40P color jumper wires
  • Length: 300mm
  • Weight: 45 gm
  • Compatible with 2.54mm spacing pin headers
  • High quality and in good working condition
  • Durable and reusable
  • Easy to install and use
Package includes : 1 x 30 CM Dupont Wire Multi-Color, Female to Female Jumper Wire 40 PCS

40 Pin Dupont Male to Female Jumper Wire, 40 Pieces

79.00
PRODUCT OVERVIEW:
  • 40 P color DuPont line
  • Weight: 45 gm
  • Compatible with 2.54mm spacing pin headers
  • 40 pcs chromatic male to female color jump wire
  • High quality and in good working condition
  • Durable and reusable
  • Easy to install and use
Package includes : 1 x 30 CM Dupont Wire Multi-Color Jumper Cable,  Male to Female Jumper Wire 40 PCS

40 Pin Dupont Male to Male Jumper Wire, 40 Pieces

79.00
PRODUCT OVERVIEW:
  • 40P color DuPont line
  • Weight: 45 gm
  • Compatible with 2.54mm spacing pin headers
  • 40pcs chromatic male to male color jumper wire
  • High quality and in good working condition
  • Durable and reusable
  • Easy to install and use
Package includes : 1 x 30 CM Dupont Wire Multi-Color Jumper Cable, Male to Male Jumper Wire 40 PCS

58mm Bluetooth Thermal Printer

2,999.00
PRODUCT OVERVIEW:-
  • Easy connectivity with mobile Bluetooth.
  • USB / Bluetooth interface available.
  • The 58mm Bluetooth thermal receipt printer support cash drawer driving.
  • Compatible ESC/pos print commands, support bitmap, and download graphics printing.
  • Quality printing low noise and high-speed printing.
  • Easy install - the USB pos printer is simple and convenient to operate.
  • Quick and easy paper change with low maintenance cost.

Package Includes:

  • 1 x 58mm Bluetooth Thermal Printer
  • 1 x USB Cable
  • 1 x Power Cable
  • 1 x CD Drive
  • 1 x User Manual

58mm Thermal Receipt Printer

1,999.00
PRODUCT OVERVIEW:-
  • The 58mm thermal receipt printer support cash drawer driving.
  • Quality printing low noise and high-speed printing.
  • Quick and easy paper change with low maintenance cost.
  • Easy install - the USB POS printer is simple and convenient to operate.
  • Compatible ESC/POS print commands, support bitmap, and download graphics printing.

Package Includes:

  • 1 x 58mm Thermal Printer
  • 1 x USB Cable
  • 1 x Power Cable
  • 1 x CD Drive
  • 1 x User Manual

58mm Thermal Receipt Printer (Black)

1,999.00
PRODUCT OVERVIEW:-
  • The 58mm thermal receipt printer support cash drawer driving.
  • Quality printing low noise and high-speed printing.
  • Quick and easy paper change with low maintenance cost.
  • Easy install - the USB POS printer is simple and convenient to operate.
  • Compatible ESC/POS print commands, support bitmap, and download graphics printing.

Package Includes:

  • 1 x 58mm Thermal Printer
  • 1 x USB Cable
  • 1 x Power Cable
  • 1 x CD Drive
  • 1 x User Manual

5V 2 Channel Relay Module with Optocoupler for Arduino

199.00

Specifications:

  • Operating Voltage: 5V
  • Trigger: Low Active
  • Relay Type: 2-Channel
  • Driver Current: 15-20mA
  • Relay Ratings: AC250V 10A, DC30V 10A
  • Transistor Drive: 8550
  • Compatibility: Arduino, 8051, AVR, PIC, DSP, ARM, MSP430, TTL Logic

Package Includes:

1 x 5v 2 Channel Relay Module with Optocoupler

5V 4 Channel Relay Control Board Module

249.00

Specifications:

  • Voltage Compatibility: 5V
  • Number of Channels: 4
  • Driver Current per Channel: 15-20mA
  • Relay Type: High-current, AC250V 10A; DC30V 10A
  • Interface Compatibility: Arduino, 8051, AVR, PIC, DSP, ARM, MSP430, TTL logic
  • LED Indicators: Included for relay output status

Package Includes:

1 x 5V 4 Channel Relay Board Module

5V Single Channel (One Channel) Relay Module for Arduino

179.00

Specifications:

  • Number of Channels: 1
  • Operating Temperature Range: -40 to 85 °C
  • Switching Voltage (AC): 250V @ 10A
  • Switching Voltage (DC): 30V @ 10A
  • Trigger Current: 20 mA
  • Trigger Voltage: 5 V (DC)
Package Includes: 1 x Single Channel (1 Channel) 5V Relay Module

65mm BO Wheels, Robot Wheel For BO Motors

69.00
PRODUCT OVERVIEW
  • A tire with sponge liner for more strength
  • With upgraded tire tread for greater friction
  • New design wheel for better combination with the motor
  • Diameter: 65 mm
  • The material of Wheel: High-strength plastic
  • The material of Tyre: Rubber
  • Color: Yellow
Package Includes: 1 x 65mm Robot Wheel for BO Motors

8 Channel Relay Board 5V Expansion Module with Optocoupler

399.00

Specifications:

  • Product Name: 8 Channel Relay Board
  • Voltage Compatibility: 5V (DC)
  • Relay Type: Electromagnetic Relay
  • Operating Temperature: -40°C to +85°C
  • Input Voltage: 5V DC (Operating)
  • Input Voltage Range: 3.3V to 12V DC
  • Trigger Input Voltage: 0V (Low-Level Trigger) to VCC (High-Level Trigger)

Package Includes:

1 x 8 Channel Relay Module

A2212 1000KV BLDC Motor With Soldered Bullet Connector (Set of 4)

2,149.00
PRODUCT OVERVIEW
  • Motor KV: 1000
  • Current Capacity: 12A/60S
  • LiPO Batteries: 2S-3S
  • Efficiency Current: 4-10A
  • Shaft Diameter: 3.17 mm
  • Prop Adapter is quality tested before shipping to customers.
Package Includes :
  • 4 x A2212 1000Kv Brushless Motor for Drone
  • 4 x Prop Adapter
  • A Motor Holder (X-type) and set of screws

A2212 1400KV BLDC Motor With Soldered Bullet Connector

549.00
PRODUCT OVERVIEW
  • Motor KV: 1000
  • Current Capacity: 12A/60S
  • LiPO Batteries: 2S-3S
  • Efficiency Current: 4-10A
  • Shaft Diameter: 3.17 mm
  • Prop Adapter is quality tested before shipping to customers.
Package Includes :
  • 1 x A2212 1000Kv Brushless Motor for Drone
  • 1 x Prop Adapter
  • A Motor Holder (X-type) and set of screws

A2212 1400KV BLDC Motor With Soldered Bullet Connector (Set of 4)

1,799.00
PRODUCT OVERVIEW
  • Motor KV: 1000
  • Current Capacity: 12A/60S
  • LiPO Batteries: 2S-3S
  • Efficiency Current: 4-10A
  • Shaft Diameter: 3.17 mm
  • Prop Adapter is quality tested before shipping to customers.
Package Includes :
  • 1 x A2212 1000Kv Brushless Motor for Drone
  • 1 x Prop Adapter
  • A Motor Holder (X-type) and set of screws

Arduino UNO R3 & Ultrasonic Sensor With SG90 Motor and Jumper Wires

1,329.00
PRODUCT OVERVIEW
  • Ultrasonic Operating Voltage(VDC): 3.2 – 5.2
  • SG90 Operating Voltage: 3.0 – 7.2V
  • Ultrasonic weight (gm): 10
  • SG90 weight (gm): 9
  • Ultrasonic Measurement Range: 3cm to 350Cm
  • SG90 Rotational Degree: 180
  • Jumper Wire Compatible with 2.54mm spacing pin headers
  • Jumper Wire Durable and reusable
  • Micro-controller : ATmega328.
  • Operating Voltage: 5V.
  • Input Voltage (recommended) : 7-12V.
  • Digital I/O Pins: 14 (of which 6 provide PWM output).
  • Analog Input Pins: 6
Package Includes:
  • 1 x Ultrasonic Sensor HC-SR04
  • 1 x TowerPro SG90 Servo Motor with Cable
  • 1 x SG90 Set of Horns
  • 1 x SG90 Set of Screws
  • 1 x 40 pcs Male to Male jumper wire set
  • 1 x 40 pcs Male to Female jumper wire set
  • 1 x 40 pcs Female to Female jumper wire set
  • 1 x Arduino Uno R3 Development Board
  • 1 x USB Cable

Arduino Uno R3 Development Board ATmega328P With USB Cable

899.00
Product Overview:
  • Micro-controller : ATmega328.
  • Operating Voltage: 5V.
  • Input Voltage (recommended) : 7-12V.
  • Digital I/O Pins: 14 (of which 6 provide PWM output).
  • Analog Input Pins: 6
Package  Includes :
  • 1 x Arduino Uno R3 Development Board
  • 1 x USB Cable

Arduino Uno R3 with Jumper Wires 120 Pcs

1,159.00
PRODUCT OVERVIEW
  • Micro-controller : ATmega328.
  • Operating Voltage: 5V.
  • Input Voltage (recommended) : 7-12V.
  • Digital I/O Pins: 14 (of which 6 provide PWM output).
  • Analog Input Pins: 6
  • 40P color DuPont line
  • Length: 300mm
  • Weight: 20~25 gm each
  • Compatible with 2.54mm spacing pin headers
  • 120 pcs chromatic color jump wire
  • High quality and in good working condition
  • Durable and reusable
  Package Includes:
  • 1 x Arduino Uno R3 Development Board
  • 1 x USB Cable
  • 1 x 40 pcs Male to Male jumper wire set
  • 1 x 40 pcs Male to Female jumper wire set
  • 1 x 40 pcs Female to Female jumper wire set

Arduino Uno R3 With Jumper Wires 60 Pieces

999.00
Product Overview:
  • Micro-controller : ATmega328.
  • Operating Voltage: 5V.
  • Input Voltage (recommended) : 7-12V.
  • Digital I/O Pins: 14 (of which 6 provide PWM output).
  • Analog Input Pins: 6
  • 40P color DuPont line
  • Length: 300mm
  • Weight: 20~25 gm each
  • Compatible with 2.54mm spacing pin headers
  • 120 pcs chromatic color jump wire
  • High quality and in good working condition
  • Durable and reusable
Package  Includes :
  • 1 x Arduino Uno R3 Development Board
  • 1 x USB Cable
  • 1 x 20 pcs Male to Male jumper wire set
  • 1 x 20 pcs Male to Female jumper wire set
  • 1 x 20 pcs Female to Female jumper wire set

Arduino Uno R3 with L293D Motor Driver

1,049.00
PRODUCT OVERVIEW:-
  • Experience the power of Arduino Uno R3 combined with L293D motor driver shield for seamless motor control.
  • Microcontroller ATmega328P With Operating Voltage : 5V
  • Benefit from the ATmega328P microcontroller's abundant memory for program and data storage.
  • Digital I/O Pins 14 (of which 6 provide PWM output)
  • Precisely control motors with the L293D shield's two H-bridge output channels.
  • Optimize performance with a dual power supply configuration for both Arduino Uno R3 and motors.
  • Explore a wide range of applications, including robotics, home automation, and motor-driven projects.
  • Rely on the proven reliability and robustness of this widely used combination trusted by hobbyists, enthusiasts, and professionals.
  • Expand project possibilities with compatibility with various sensors, actuators, and components.

Package Includes:

  • 1 x Arduino Uno R3 with Cable
  • 1 x L293D Motor Driver Shield

Automatic Hand Sanitizer Machine IR Sensor, Water Pump, Relay Module

199.00
PRODUCT OVERVIEW
  • Operating voltage : 5v dc
  • Ir Infrared obstacle avoidance sensor module dc 3v to 6v submersible pump
  • Make your own automatic sanitizer at home by using this kit and protect yourself.
Package Includes:
  • 1 x DC Water Pump
  • 1 x 1 Channel Relay
  • 1 x IR Sensor
  • 1 x Pipe
  • 3 x Cable Tie

BO Motor, BO Wheel & Arduino UNO R3 with Jumper Wires 60 Pcs

1,199.00
Product Overview:
  • Micro-controller : ATmega328.
  • Operating Voltage: 5V.
  • Input Voltage (recommended) : 7-12V.
  • Digital I/O Pins: 14 (of which 6 provide PWM output).
  • Analog Input Pins: 6
  • 40P color DuPont line
  • Length: 300mm
  • Weight: 20~25 gm each
  • Compatible with 2.54mm spacing pin headers
  • 60 pcs chromatic color jumper wire
  • High quality and in good working condition
  • Durable and reusable
Package  Includes :
  • 1 x Arduino Uno R3 Development Board
  • 1 x USB Cable
  • 1 x 20 pcs Male to Male jumper wire set
  • 1 x 20 pcs Male to Female jumper wire set
  • 1 x 20 pcs Female to Female jumper wire set
  • 4 x BO Motor
  • 4 x BO Wheel

Chess Clock by LEAP Master Tournament

2,449.00

Specifications:

  • Product Type: Digital Chess Clock
  • Display: Large LCD screen for clear time display
  • Accuracy: High precision timing to ensure fairness in competitive play
  • Material: Durable plastic designed to withstand frequent use and travel
  • Weight: Lightweight design for easy transportation
  • User-Friendly: Simple setup process for players of all skill levels

Package Includes:

1 x LEAP Master Tournament Digital Chess Clock

DC 3.7-6V To 400KV Boost Step Up Power Module

209.00
PRODUCT OVERVIEW
  • Input Voltage: DC3.6V-6V
  • Input Current: 2A-5A
  • Output Voltage: DC 400KV (Please pay attention to safety when used)
  • Input Line Length: about 100mm (red is positive)
  • Output Line Length: about 160mm
Package Includes: 1 x 400KV Step Up Power Module

DC BO Motor 12V Dual Shaft – Straight

79.00
PRODUCT OVERVIEW
  • Low density: lightweight, low inertia.
  • Capability to absorb shock and vibration as a result of elastic compliance.
  • Ability to operate with minimum or no lubrication, due to inherent lubricity.
  • The relatively low coefficient of friction.
  • Operating Voltage (VDC): 3~12
  • Shaft Length (mm): 8.5
  • Shaft Diameter (mm): 5.5 (Double D-type)
  • No Load Current: 40-180mA.
  • Rated Speed(After Reduction): 100 RPM
  • Rated Torque: 0.35 Kg cm
Package Includes: 1 x BO MOTOR FOR BO WHEEL

DC Dual Shaft BO Gear Motor & Wheel With SG90 Servo Motor

439.00
PRODUCT OVERVIEW
  • Operating Voltage 3V - 12V DC
  • RPM Approximately 150 RPM
  • No load current 40 - 80 mA
  • Output Torque 3.5 kgf.cm
  • High quality plastic wheel and BO-series motor
  • Plastic Wheels with a slot that matches BO Motor Shaft are made to work with BO motors both Series I and II.
  • 66mm diameter, 20mm width
  • Operating Voltage: 5 V
  • Sonar Sensing Range: 2-400 cm
  • Max. Sensing Range: 450 cm
  • Frequency: 40 kHz
  • Operating voltage: 3.0V~ 7.2V
  • Stall torque @4.8V : 1.2kg-cm
  • Stall torque @6.6V: 1.6kg-
Package Includes:
  • 4 x BO Motor
  • 4 x BO Wheel
  • 1 x HC-SR04 Ultrasonic Sensor
  • 1 x Towerpro SG90 Mini Servo Motor

DC Dual Shaft BO Motor & Wheel with SG90 Motor and Ultrasonic Sensor

498.00
PRODUCT OVERVIEW
  • Operating Voltage 3V - 12V DC
  • RPM Approximately 150 RPM
  • No load current 40 - 80 mA
  • Output Torque 3.5 kgf.cm
  • High quality plastic wheel and BO-series motor
  • Plastic Wheels with a slot that matches BO Motor Shaft are made to work with BO motors both Series I and II.
  • 66mm diameter, 20mm width
  • Operating Voltage: 5 V
  • Sonar Sensing Range: 2-400 cm
  • Max. Sensing Range: 450 cm
  • Frequency: 40 kHz
  • Operating voltage: 3.0V~ 7.2V
  • Stall torque @4.8V : 1.2kg-cm
  • Stall torque @6.6V: 1.6kg-
Package Includes:
  • 4 x BO Motor
  • 4 x BO Wheel
  • 1 x HC-SR04 Ultrasonic Sensor
  • 1 x Towerpro SG90 Mini Servo Motor

DC Water Pump – Micro DC 3-6V Submersible Mini Water Pump

69.00
PRODUCT OVERVIEW
  • Mini pump, delicate and light, very perfect for an experiment, aquarium, fish tank, and fountain, etc.
  • DC 3v to 6v submersible pump
  • Micro mini submersible water pump 3v to 6v
  • DC water pump for DIY
  • DC pumps for the HOBBY kit.
Package Includes: 1 x 3-6V Micro Submersible DC Water Pump

Digital Kitchen Timer – Baseus Heyo Rotation Countdown Timer Kitchen Timer

1,470.00

Specifications:

  • Product Type: Digital Kitchen Timer
  • Functionality: Multi-use with alarm clock, countdown, and stopwatch features
  • Display: Clear, easy-to-read digital screen
  • Timing Capacity: Ranges from 1 second to 99 minutes and 59 seconds
  • Material: Durable, high-quality plastic for long-lasting use

Package Includes:

1 x Digital Kitchen Timer Baseus Heyo Rotation Countdown Timer 1 x User Manual

Digital Timer Clock by Taylor – Perfect Timing for Every Task

3,623.00

Specifications:

  • Brand: Taylor
  • Product Type: Digital Timer Clock
  • Versatility: Suitable for cooking, studying, workouts, and more
  • Accuracy: Ensures precise timing for all your activities
  • Additional Features: Includes a countdown and count-up feature
  • Colour: Sleek design to fit any decor style
  • Interface: User-friendly with simple button controls

Package Includes:

1 x Taylor Dual Event Digital Timer

Digital Timer Switch Programmable Timer Switch for Lights and Appliances – Quick Sense Digital Timer

999.00

Specifications:

  • Type: Programmable Din Type Digital Timer Controller
  • Voltage Compatibility: 16/240V AC, suitable for a wide range of household appliances
  • Programmable Settings: Offers both daily and weekly programming options for flexible scheduling
  • Switch Type: Relay Switch, ensuring reliable operation for lights and appliances
  • Application: Suitable for controlling lighting, fans, and other electronic devices, enhancing home automation and energy efficiency

Package Includes:

1 x Quick Sense 16/240V AC Programmable Din Type Digital Timer Controller

Digital Voltmeter Ammeter DC 0-100V 10A Dual LED Monitor Panel

299.00
PRODUCT OVERVIEW
  • Operating Voltage: 5V DC
  • Current Consumption: <60mA
  • Testing Voltage: 0-100V
  • Testing Current: 1-50A
  • Easy to read even in dim light
Package Includes: 1 x Digital Voltmeter Ammeter Monitor Panel

Drone Kit Universal Tall Landing Gear Skid for DJI F450 F550 Sk480 Multirotor Quadcopter – Black

249.00

Specifications:

  • Material: ABS Plastic
  • Colour: Black
  • Ground Clearance: 150 mm
  • Length: 200 mm
  • Weight: 75 gm
  • Compatibility: Specifically designed for Q450 and S500 Frames

Package Includes:

1 x High Landing Gear For F450 F550 SK480 Frame (Black)

Dual Shaft BO Motor & Wheel (Set of 4) & Arduino UNO R3

1,129.00
PRODUCT OVERVIEW
  • Operating Voltage 3V - 12V DC
  • RPM Approximately 150 RPM
  • No-load current 40 - 80 mA
  • Output Torque 3.5 kg-cm
  • High-quality plastic wheel and BO-series motor
  • Plastic Wheels with a slot that matches BO Motor Shaft are made to work with BO motors in both Series I and II.
  • 66mm diameter, 20mm width
  • Operating Voltage: 5 V
  • Sonar Sensing Range: 2-400 cm
  • Max. Sensing Range: 450 cm
  • Frequency: 40 kHz
  • Operating voltage: 3.0V~ 7.2V
  • Stall torque @4.8V : 1.2kg-cm
  • Stall torque @6.6V: 1.6kg
  • Micro-controller : ATmega328.
  • Operating Voltage: 5V.
  • Input Voltage (recommended) : 7-12V.
  • Digital I/O Pins: 14 (of which 6 provide PWM output).
  • Analog Input Pins: 6
Package Includes:
  • 4 x BO Motor
  • 4 x BO Wheel
  • 1 x Arduino Uno R3 Development Board
  • 1 x USB Cable

Dual Shaft BO Motor With BO Wheel (Yellow)

129.00
PRODUCT OVERVIEW
  • Kit Contains:Double shaft bo motor with wheel
  • Operating Voltage 3V - 12V DC
  • RPM Approximately 150 RPM
  • No load current 40 - 80 mA
  • Output Torque 3.5 kgf.cm
  • High quality plastic wheel and BO-series motor
  • Plastic Wheels with a slot that matches BO Motor Shaft are made to work with BO motors both Series I and II.
  • 66mm diameter, 20mm width
Package Includes:
  • 1 x BO Motor
  • 1 x BO Wheel

F450 Tri Colour Quadcopter Frame With PCB Board VT400 – ‘MADE IN INDIA’

799.00
PRODUCT OVERVIEW
  • MADE IN INDIA TRI COLOUR F450 Quadcopter Frame
  • Built from quality glass fiber and polyamide-nylon
  • Pre-threaded brass sleeves for all of the frame bolts
  • Colored arms for orientation to keep you flying in the right direction
  • Large mounting tabs on main frame bottom plate for easy camera mounting
Package Includes:
  • 1 x F450 tri-color Made In INDIA Quadcopter Frame
  • 1 x PCB Board
  • 2 x Orange arms
  • 2 x Green Arms
  • Set of Screws
Video Tutorial

Frontier TM619H2 Digital Timer Programmable Time Switch

498.00

PRODUCT OVERVIEW:-

  • 17 on or off programs can be set per day
  • Easy-to-replace battery
  • Option to select specific days or days of the week for programmed functions to be performed
  • LED power indicator
  • Manual override switch
  • LCD on-screen displays on and off switching status
  • The lithium battery inside for memory backup
  • Daily, weekly, and impulse programs
  • Time switch with LCD display 4-pin
  • Easy connection settings.

Package Includes:

  • 1 x Frontier Digital Programmable Timer
  • 1 x Instruction Manual

GE MyTouchsmart Indoor Plug-In Digital Timer Switch

2,612.00

Specifications:

  • Type: Indoor Plug-In Digital Timer Switch
  • Compatibility: Works with lamps, seasonal lighting, small appliances, and more
  • Programming: Customizable on/off timer schedules for daily routines
  • Installation: Easy plug-and-play setup with no wiring required
  • Display: Digital interface for straightforward programming
  • Countdown Feature: Includes options for countdown timing for added convenience

Package Includes:

1 x MyTouchSmart Indoor Plug-In Digital Timer Switch

IR Sensor Module – Infrared Obstacle Avoidance Sensor

79.00
PRODUCT OVERVIEW:-
  • Easy to assemble and use
  • Onboard detection indication
  • The effective distance range of 2cm to 80cm
  • There is an obstacle, the green indicator light on the circuit board.
  • 3-5V DC power supply module can be used. When the power is turned on, the red power LED is lit.
Package Includes:
1 x IR Sensor Module

Jumper Wires M-M, M-F, F-F, 20cm, 120 Pieces

179.00
PRODUCT OVERVIEW
  • 40P color DuPont line
  • Length: 300mm
  • Weight: 20~25 gm each
  • Compatible with 2.54mm spacing pin headers
  • 120 pcs chromatic color jump wire
  • High quality and in good working condition
  • Durable and reusable
  • Easy to install and use
Package Includes:
  • 1 x 40 pcs Male to Male jumper wire set
  • 1 x 40 pcs Male to Female jumper wire set
  • 1 x 40 pcs Female to Female jumper wire set

Jumper Wires M-M, M-F, F-F, 20cm, 60 Pieces

99.00
PRODUCT OVERVIEW
  1. 40P color DuPont line
  2. Length: 300mm
  3. Weight: 20~25 gm each
  4. Compatible with 2.54mm spacing pin headers
  5. 60 pcs chromatic color jump wire
  6. High quality and in good working condition
  7. Durable and reusable
  8. Easy to install and use
Package Includes:
  • 1 x 20pcs Male to Male jumper wire set
  • 1 x 20pcs Male to Female jumper wire set
  • 1 x 20pcs Female to Female jumper wire set

L293D Motor Driver Shield Or Servo Shield For Arduino

199.00
PRODUCT OVERVIEW
  • Capable of Driving 2 Stepper or DC motor
  • Bidirectional Control
  • Motor Voltage rating: 4.5V to 25V
  • Can also drive servo motor
  • High efficiency and simple usage
  • Continuous Output current 1.2A
Package Includes: 1 x L293D Motor Driver/Servo Shield for Arduino

L298N Motor Driver Module with PWM Control

189.00
PRODUCT OVERVIEW
  • Driver chip: L298 dual H-bridge driver chip.
  • Operates up to 35V DC.
  • Drive part of the peak current Io: 2A / Bridge.
  • The logical part of the terminal power supply range Vss:4.5V-5.5V
  • The logical part of the operating current range: 0 ~ 36mA.
  • Maximum power consumption: 20W.
  • Current Sense for each motor.
  • Heatsink for better performance.
  • Power-On LED indicator.
  • Drives up to 4 motors.
Package Includes: 1 x L298N Based Motor Driver Module – 2A (Standard Quality)

Leyden Smart Digital Electronic Programmable Switch Timer

699.00

Specifications:

  • Model: Leyden Smart Digital Electronic Programmable Switch
  • Type: Digital Timer Switch
  • Voltage: 230Volts
  • Easy Setup: User-friendly interface for simple installation
  • Programmable: Set multiple timer settings for different devices.
  • Convenient: Say goodbye to manual switching with this electronic timer

Package Includes:

1 x Leyden Smart Digital Electronic Programmable Switch

MB102 830 Points Breadboard with 65Pcs Jumper Wires

249.00

 PRODUCT OVERVIEW:-

  • 830 point solderless breadboard layout for ample space and Versatility.
  • Durable construction with precision machined contacts for excellent electrical connectivity.
  • Multiple sections for easy organization of Parts.
  • 65 high-quality male to male jumper wires for hassle free connections.
  • Different colors for easy recognition and organization.

Package Includes:

  • 1 x MB102 830 Points Solderless Prototype PCB Breadboard
  • 1 x 65 Male to Male Jumper Wires

MB102 830 Points Solder-less Prototype PCB Breadboard

149.00
Product Overview:
  • Mb102 Bread Board
  • 830 Solder-less Points
  • Ideal for Experimenting With Circuit Design In Labs
  • Accept a variety of wire sizes 20-29 AWG
  • Completely reusable
  • Colored coordinates for easy components placement.
Package  Includes: 1 x Solderless Breadboard 830 Tie Points MB102

NodeMCU ESP8266 CP2102 Board – IoT Development Board

299.00

Specifications:

  • Microcontroller: ESP8266 ESP-12E
  • USB-to-Serial Converter: CP2102
  • WiFi Protocol: 802.11 b/g/n
  • Programming: Pre-flashed with NodeMCU firmware
  • Compatible with Arduino IDE for code upload

Package Includes:

1 x ESP8266 NodeMCU CP2102 Board

NodeMCU ESP8266 V3 Lua CH340 Wi-Fi Development Board

299.00

Specifications:

  • NodeMCU ESP8266 V3 with CH340 chipset.
  • Microcontroller: ESP8266
  • USB-to-Serial Converter: CH340
  • WiFi Connectivity: 802.11 b/g/n at 2.4GHz
  • Security Protocols: Supports WPA/WPA2
  • Operating Modes: STA/AP/STA+AP
  • Programming: Supports programming via Lua script or Arduino IDE
  • Flash Memory: 4MByte

Package Includes:

1 x NodeMCU ESP8266 V3 Lua CH340 WiFi Development Board

RFID Sensor Module RC522 for Secure and Efficient Card Reading

159.00

Specifications of RFID Sensor RC522:

  • Integrated MF RC522 chip for efficient RFID reading
  • Operates at 13.56MHz for high-speed communication
  • Low-voltage, cost-effective, compact design
  • Non-contact card chip with up to 60mm reading distance
  • Supports SPI protocol for easy CPU integration
  • Ideal for smart meters, handheld devices, access control
Package Includes:
  • 1 x RFID-RC522 Reader/Writer Module
  • 1 x Standard blank RFID card
  • 1 x Straight header strip
  • 1 x Right-angle header strip
  • 1 x Special-shaped key-chain RFID tag

TowerPro SG90 Micro Servo Motor – 180 degree Rotation

169.00
PRODUCT OVERVIEW
  • Model: SG90
  • Weight: 9 gm
  • Operating voltage: 3.0V~ 7.2V
  • Servo Plug: JR
  • Stall torque @4.8V : 1.2kg-cm
  • Stall torque @6.6V: 1.6kg-
Package Includes: 
  • 1 x TowerPro SG90 Servo Motor with Cable
  • 1 x Set of Horns
  • 1 x Set of Screws

TowerPro SG90 Servo Motor with Ultrasonic Sensor

249.00
PRODUCT OVERVIEW
  • Ultrasonic Operating Voltage(VDC): 3.2 – 5.2
  • SG90 Operating Voltage: 3.0 – 7.2V
  • Ultrasonic weight (gm): 10
  • SG90 weight (gm): 9
  • Ultrasonic Measurement Range: 3cm to 350Cm
  • SG90 Rotational Degree: 180
Package Includes:
  • 1 x Ultrasonic Sensor HC-SR04
  • 1 x TowerPro SG90 Servo Motor with Cable
  • 1 x Set of Horns
  • 1 x Set of Screws

Ultrasonic Range Sensor HC-SR04 Sensor Module

79.00
PRODUCT OVERVIEW
  • Affordable Price
  • Operating Voltage: 5 V
  • Sonar Sensing Range: 2-400 cm
  • Max. Sensing Range: 450 cm
  • Frequency: 40 kHz
Package Includes: 1 x  Ultrasonic Sensor HC-SR04

Ultrasonic Sensor with SG90 Motor and 10 pcs M-F Jumper Wire

279.00
PRODUCT OVERVIEW
  • Ultrasonic Operating Voltage(VDC): 3.2 – 5.2
  • SG90 Operating Voltage: 3.0 – 7.2V
  • Ultrasonic weight (gm): 10
  • SG90 weight (gm): 9
  • Ultrasonic Measurement Range: 3cm to 350Cm
  • SG90 Rotational Degree: 180
  • Jumper Wire Compatible with 2.54mm spacing pin headers
  • Jumper Wire Durable and reusable
Package Includes:
  • 1 x Ultrasonic Sensor HC-SR04
  • 1 x TowerPro SG90 Servo Motor with Cable
  • 1 x Set of Horns
  • 1 x Set of Screws
  • 1 x 10Pcs Male to Female Jumper Wire

W1209 Digital Temperature Controller Thermostat Sensor

189.00
PRODUCT OVERVIEW:
  • Temperature Control Range(°C): -50 to +110
  • Resolution @-9.9°C to +99.9°C: 0.1°C
  • Resolution @all temperatures: 1°C
  • Accuracy: 0.1°C
  • Refresh Rate(s): 0.5
  • Supply Voltage(V): 12
  • Measuring Inputs: NTC10K
  • Cable Length: 0.5 Meter
  • Output Type: 1 Channel Relay Output
  • Capacity: 10A
Package Includes: 1 x W1209 digital temperature controller switch with Temperature sensor and display

XH-W3001 AC 220V 1500W Digital Display Temperature Controller

349.00
PRODUCT OVERVIEW:
  • Output type: AC Output (AC 220V 1500W).
  • Output capacity: MAX temperature measurement, display; refrigeration, heating control
  • Temperature setting upper and lower limits
  • Simple operation, suitable for seafood machines.
  • Upper key: The start temperature is displayed in one press, and a long press to set the start temperature.
  • Lower key: The stop temperature is displayed in one press, and long press to set stop temperature.
  • Control Accuracy: Upto 0.1℃.
Package Includes: 1 x w3001 temperature controller