Arduino Kit BO Motor with Wheel and Arduino Uno R3 with Jumper Wires
Specifications:
Specifications of BO Motor:
- Motor Type:Â DC
- Operating Voltage:Â 3 ~ 12 VDC
- Shaft Type:Â Dual Shaft
- Shaft Length:Â 8.5 mm
- Shaft Diameter:Â 5.5 mm
- Speed:Â 100 RPM
- Dimensions (LxWxH):Â 64 x 22 x 18 mm
- Weight:Â 30 g
Specifications of BO Wheel:
- Wheel Diameter:Â 65mm
- Wheel Width:Â 27mm
- D-hole For BO Motor:Â 6mm
- Compatible with:Â BO Motor
- Color:Â Black (Tyre), Yellow (Rim)
- Weight:Â 34g
Specifications of Arduino Uno:
- Microcontroller:Â ATmega328P
- Operating Voltage:Â 5V
- Input Voltage (recommended):Â 7-12V
- Digital I/O Pins:Â 14 (of which 6 provide PWM output)
- Analog Input Pins:Â 6
- SRAM:Â 2 KB
- EEPROM:Â 1 KB (ATmega328P)
- Clock Speed:Â 16 MHz
- Dimensions:Â 75 x 54 x 12 mm (L x W x H)
- Weight:Â 28 g (without cable), 54 g (with cable)
Specifications of Jumper Wires:
- Wire Type:Â Male-to-male, male-to-female, female-to-female
- Color:Â Assorted colors for easy identification
- Wire Length: 20 cm
- Diameter:Â 0.1cm
- Pins: Standard 0.1-inch (2.54mm) spacing
- Quantity:Â 60 pieces
- Weight:Â 50g
Package Includes:
1 x Arduino Uno R3 Development Board 1 x USB Cable 4 x BO Motor 4 x BO Wheel 20 x Male to Male jumper wires 20 x Male to Female jumper wires 20 x Female to Female jumper wiresArduino Uno R3 Development Board ATmega328P with USB Cable
Specifications:
- Microcontroller: ATmega328P
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- DC Current per I/O Pin: 20 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 32 KB (of which the bootloader uses 0.5 KB)
- SRAM: 2 KB
- EEPROM: 1 KB (ATmega328P)
- Clock Speed: 16 MHz
- USB Interface: USB Type-B
- Compatibility: Compatible with Arduino IDE
- Dimensions: 75 x 54 x 12 mm (L x W x H)
- Weight: 28 g (without cable), 54 g (with cable)
Package Includes:
1 x Arduino Uno R3 Development Board 1 x USB CableArduino Uno R3 with Jumper Wires 120 Pcs
Specifications:
- Microcontroller:Â ATmega328P
- Operating Voltage:Â 5V
- Input Voltage (recommended):Â 7-12V
- Digital I/O Pins:Â 14 (of which 6 provide PWM output)
- Analog Input Pins:Â 6
- DC Current per I/O Pin:Â 20 mA
- DC Current for 3.3V Pin:Â 50 mA
- Flash Memory:Â 32 KB (ATmega328P), of which 0.5 KB is used by the bootloader
- SRAM:Â 2 KB
- EEPROM:Â 1 KB
- Clock Speed:Â 16 MHz
- Quantity of Jumper Wires: 120 Pieces
- Length of Jumper Wires:Â 20 cm
- Arduino Dimensions:Â 75 x 54 mm
- Arduino Weight:Â 54 g
Package Includes:
1 x Arduino Uno R3 Development Board 1 x USB Cable (USB A to B Cable) 40 x Male to Male jumper wires 40 x Male to Female jumper wires 40 x Female to Female jumper wiresArduino Uno R3 with Jumper Wires 60 Pieces
Specifications:
- Microcontroller: ATmega328P
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- DC Current per I/O Pin: 20 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 32 KB (ATmega328P), of which 0.5 KB is used by the bootloader
- SRAM: 2 KB
- EEPROM: 1 KB
- Clock Speed: 16 MHz
- Quantity of Jumper Wires: 60 Pieces
- Length of Jumper Wires: 20 cm
- Arduino Dimensions: 75 x 54 mm
- Arduino Weight: 54 g
Package Includes:
1 x Arduino Uno R3 Development Board 1 x USB Cable (USB A to B Cable) 20 x Male to Male jumper wires 20 x Male to Female jumper wires 20 x Female to Female jumper wiresDIY Project Kit BO Motor with Wheel and Arduino UNO R3
Specifications:
Specifications of BO Motor:
- Motor Type:Â DC
- Operating Voltage:Â 3 ~ 12 VDC
- Shaft Type:Â Dual Shaft
- Shaft Length:Â 8.5 mm
- Shaft Diameter:Â 5.5 mm
- Speed:Â 100 RPM
- Dimensions (LxWxH):Â 64 x 22 x 18 mm
- Weight:Â 30 g
Specifications of BO Wheel:
- Wheel Diameter:Â 65mm
- Wheel Width:Â 27mm
- D-hole For BO Motor:Â 6mm
- Compatible with:Â BO Motor
- Color:Â Black (Tyre), Yellow (Rim)
- Weight:Â 34g
Specifications of Arduino Uno:
- Microcontroller:Â ATmega328P
- Operating Voltage:Â 5V
- Input Voltage (recommended):Â 7-12V
- Digital I/O Pins:Â 14 (of which 6 provide PWM output)
- Analog Input Pins:Â 6
- SRAM:Â 2 KB
- EEPROM:Â 1 KB (ATmega328P)
- Clock Speed:Â 16 MHz
- Dimensions:Â 75 x 54 x 12 mm (L x W x H)
- Weight:Â 28 g (without cable), 54 g (with cable)